git.m6w6.name Git - m6w6/libmemcached/blob - libmemcachedprotocol-0.0/binary.h

   1 /* -*- Mode: C; tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*- */
   2 /*
   3  * Copyright (c) <2008>, Sun Microsystems, Inc.
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of the  nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY SUN MICROSYSTEMS, INC. ``AS IS'' AND ANY
  18  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  19  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  20  * DISCLAIMED. IN NO EVENT SHALL SUN MICROSYSTEMS, INC. BE LIABLE FOR ANY
  21  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  22  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  23  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  24  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  27  */
  28 /*
  29  * Summary: Constants used by to implement the binary protocol.
  30  *
  31  * Copy: See Copyright for the status of this software.
  32  *
  33  * Author: Trond Norbye <trond.norbye@sun.com>
  34  */
  35
  36 #ifndef PROTOCOL_BINARY_H
  37 #define PROTOCOL_BINARY_H
  38
  39 #include <libmemcachedprotocol-0.0/vbucket.h>
  40
  41 /**
  42  * \addtogroup Protocol
  43  * @{
  44  */
  45
  46 /**
  47  * This file contains definitions of the constants and packet formats
  48  * defined in the binary specification. Please note that you _MUST_ remember
  49  * to convert each multibyte field to / from network byte order to / from
  50  * host order.
  51  */
  52 #ifdef __cplusplus
  53 extern "C"
  54 {
  55 #endif
  56
  57     /**
  58      * Definition of the legal "magic" values used in a packet.
  59      * See section 3.1 Magic byte
  60      */
  61     typedef enum {
  62         PROTOCOL_BINARY_REQ = 0x80,
  63         PROTOCOL_BINARY_RES = 0x81
  64     } protocol_binary_magic;
  65
  66     /**
  67      * Definition of the valid response status numbers.
  68      * See section 3.2 Response Status
  69      */
  70     typedef enum {
  71         PROTOCOL_BINARY_RESPONSE_SUCCESS = 0x00,
  72         PROTOCOL_BINARY_RESPONSE_KEY_ENOENT = 0x01,
  73         PROTOCOL_BINARY_RESPONSE_KEY_EEXISTS = 0x02,
  74         PROTOCOL_BINARY_RESPONSE_E2BIG = 0x03,
  75         PROTOCOL_BINARY_RESPONSE_EINVAL = 0x04,
  76         PROTOCOL_BINARY_RESPONSE_NOT_STORED = 0x05,
  77         PROTOCOL_BINARY_RESPONSE_DELTA_BADVAL = 0x06,
  78         PROTOCOL_BINARY_RESPONSE_NOT_MY_VBUCKET = 0x07,
  79         PROTOCOL_BINARY_RESPONSE_AUTH_ERROR = 0x20,
  80         PROTOCOL_BINARY_RESPONSE_AUTH_CONTINUE = 0x21,
  81         PROTOCOL_BINARY_RESPONSE_UNKNOWN_COMMAND = 0x81,
  82         PROTOCOL_BINARY_RESPONSE_ENOMEM = 0x82,
  83         PROTOCOL_BINARY_RESPONSE_NOT_SUPPORTED = 0x83,
  84         PROTOCOL_BINARY_RESPONSE_EINTERNAL = 0x84,
  85         PROTOCOL_BINARY_RESPONSE_EBUSY = 0x85,
  86         PROTOCOL_BINARY_RESPONSE_ETMPFAIL = 0x86
  87     } protocol_binary_response_status;
  88
  89     /**
  90      * Defintion of the different command opcodes.
  91      * See section 3.3 Command Opcodes
  92      */
  93     typedef enum {
  94         PROTOCOL_BINARY_CMD_GET = 0x00,
  95         PROTOCOL_BINARY_CMD_SET = 0x01,
  96         PROTOCOL_BINARY_CMD_ADD = 0x02,
  97         PROTOCOL_BINARY_CMD_REPLACE = 0x03,
  98         PROTOCOL_BINARY_CMD_DELETE = 0x04,
  99         PROTOCOL_BINARY_CMD_INCREMENT = 0x05,
 100         PROTOCOL_BINARY_CMD_DECREMENT = 0x06,
 101         PROTOCOL_BINARY_CMD_QUIT = 0x07,
 102         PROTOCOL_BINARY_CMD_FLUSH = 0x08,
 103         PROTOCOL_BINARY_CMD_GETQ = 0x09,
 104         PROTOCOL_BINARY_CMD_NOOP = 0x0a,
 105         PROTOCOL_BINARY_CMD_VERSION = 0x0b,
 106         PROTOCOL_BINARY_CMD_GETK = 0x0c,
 107         PROTOCOL_BINARY_CMD_GETKQ = 0x0d,
 108         PROTOCOL_BINARY_CMD_APPEND = 0x0e,
 109         PROTOCOL_BINARY_CMD_PREPEND = 0x0f,
 110         PROTOCOL_BINARY_CMD_STAT = 0x10,
 111         PROTOCOL_BINARY_CMD_SETQ = 0x11,
 112         PROTOCOL_BINARY_CMD_ADDQ = 0x12,
 113         PROTOCOL_BINARY_CMD_REPLACEQ = 0x13,
 114         PROTOCOL_BINARY_CMD_DELETEQ = 0x14,
 115         PROTOCOL_BINARY_CMD_INCREMENTQ = 0x15,
 116         PROTOCOL_BINARY_CMD_DECREMENTQ = 0x16,
 117         PROTOCOL_BINARY_CMD_QUITQ = 0x17,
 118         PROTOCOL_BINARY_CMD_FLUSHQ = 0x18,
 119         PROTOCOL_BINARY_CMD_APPENDQ = 0x19,
 120         PROTOCOL_BINARY_CMD_PREPENDQ = 0x1a,
 121         PROTOCOL_BINARY_CMD_VERBOSITY = 0x1b,
 122         PROTOCOL_BINARY_CMD_TOUCH = 0x1c,
 123         PROTOCOL_BINARY_CMD_GAT = 0x1d,
 124         PROTOCOL_BINARY_CMD_GATQ = 0x1e,
 125
 126         PROTOCOL_BINARY_CMD_SASL_LIST_MECHS = 0x20,
 127         PROTOCOL_BINARY_CMD_SASL_AUTH = 0x21,
 128         PROTOCOL_BINARY_CMD_SASL_STEP = 0x22,
 129
 130         /* These commands are used for range operations and exist within
 131          * this header for use in other projects.  Range operations are
 132          * not expected to be implemented in the memcached server itself.
 133          */
 134         PROTOCOL_BINARY_CMD_RGET      = 0x30,
 135         PROTOCOL_BINARY_CMD_RSET      = 0x31,
 136         PROTOCOL_BINARY_CMD_RSETQ     = 0x32,
 137         PROTOCOL_BINARY_CMD_RAPPEND   = 0x33,
 138         PROTOCOL_BINARY_CMD_RAPPENDQ  = 0x34,
 139         PROTOCOL_BINARY_CMD_RPREPEND  = 0x35,
 140         PROTOCOL_BINARY_CMD_RPREPENDQ = 0x36,
 141         PROTOCOL_BINARY_CMD_RDELETE   = 0x37,
 142         PROTOCOL_BINARY_CMD_RDELETEQ  = 0x38,
 143         PROTOCOL_BINARY_CMD_RINCR     = 0x39,
 144         PROTOCOL_BINARY_CMD_RINCRQ    = 0x3a,
 145         PROTOCOL_BINARY_CMD_RDECR     = 0x3b,
 146         PROTOCOL_BINARY_CMD_RDECRQ    = 0x3c,
 147         /* End Range operations */
 148
 149         /* VBucket commands */
 150         PROTOCOL_BINARY_CMD_SET_VBUCKET = 0x3d,
 151         PROTOCOL_BINARY_CMD_GET_VBUCKET = 0x3e,
 152         PROTOCOL_BINARY_CMD_DEL_VBUCKET = 0x3f,
 153         /* End VBucket commands */
 154
 155         /* TAP commands */
 156         PROTOCOL_BINARY_CMD_TAP_CONNECT = 0x40,
 157         PROTOCOL_BINARY_CMD_TAP_MUTATION = 0x41,
 158         PROTOCOL_BINARY_CMD_TAP_DELETE = 0x42,
 159         PROTOCOL_BINARY_CMD_TAP_FLUSH = 0x43,
 160         PROTOCOL_BINARY_CMD_TAP_OPAQUE = 0x44,
 161         PROTOCOL_BINARY_CMD_TAP_VBUCKET_SET = 0x45,
 162         PROTOCOL_BINARY_CMD_TAP_CHECKPOINT_START = 0x46,
 163         PROTOCOL_BINARY_CMD_TAP_CHECKPOINT_END = 0x47,
 164         /* End TAP */
 165
 166         PROTOCOL_BINARY_CMD_LAST_RESERVED = 0xef,
 167
 168         /* Scrub the data */
 169         PROTOCOL_BINARY_CMD_SCRUB = 0xf0
 170     } protocol_binary_command;
 171
 172     /**
 173      * Definition of the data types in the packet
 174      * See section 3.4 Data Types
 175      */
 176     typedef enum {
 177         PROTOCOL_BINARY_RAW_BYTES = 0x00
 178     } protocol_binary_datatypes;
 179
 180     /**
 181      * Definition of the header structure for a request packet.
 182      * See section 2
 183      */
 184     typedef union {
 185         struct {
 186             uint8_t magic;
 187             uint8_t opcode;
 188             uint16_t keylen;
 189             uint8_t extlen;
 190             uint8_t datatype;
 191             uint16_t vbucket;
 192             uint32_t bodylen;
 193             uint32_t opaque;
 194             uint64_t cas;
 195         } request;
 196         uint8_t bytes[24];
 197     } protocol_binary_request_header;
 198
 199     /**
 200      * Definition of the header structure for a response packet.
 201      * See section 2
 202      */
 203     typedef union {
 204         struct {
 205             uint8_t magic;
 206             uint8_t opcode;
 207             uint16_t keylen;
 208             uint8_t extlen;
 209             uint8_t datatype;
 210             uint16_t status;
 211             uint32_t bodylen;
 212             uint32_t opaque;
 213             uint64_t cas;
 214         } response;
 215         uint8_t bytes[24];
 216     } protocol_binary_response_header;
 217
 218     /**
 219      * Definition of a request-packet containing no extras
 220      */
 221     union protocol_binary_request_no_extras {
 222         struct {
 223             protocol_binary_request_header header;
 224         } message;
 225         uint8_t bytes[sizeof(protocol_binary_request_header)];
 226     };
 227     typedef union protocol_binary_request_no_extras protocol_binary_request_no_extras;
 228
 229     /**
 230      * Definition of a response-packet containing no extras
 231      */
 232     typedef union {
 233         struct {
 234             protocol_binary_response_header header;
 235         } message;
 236         uint8_t bytes[sizeof(protocol_binary_response_header)];
 237     } protocol_binary_response_no_extras;
 238
 239     /**
 240      * Definition of the packet used by the get, getq, getk and getkq command.
 241      * See section 4
 242      */
 243     typedef protocol_binary_request_no_extras protocol_binary_request_get;
 244     typedef protocol_binary_request_no_extras protocol_binary_request_getq;
 245     typedef protocol_binary_request_no_extras protocol_binary_request_getk;
 246     typedef protocol_binary_request_no_extras protocol_binary_request_getkq;
 247
 248     /**
 249      * Definition of the packet returned from a successful get, getq, getk and
 250      * getkq.
 251      * See section 4
 252      */
 253     typedef union {
 254         struct {
 255             protocol_binary_response_header header;
 256             struct {
 257                 uint32_t flags;
 258             } body;
 259         } message;
 260         uint8_t bytes[sizeof(protocol_binary_response_header) + 4];
 261     } protocol_binary_response_get;
 262
 263     typedef protocol_binary_response_get protocol_binary_response_getq;
 264     typedef protocol_binary_response_get protocol_binary_response_getk;
 265     typedef protocol_binary_response_get protocol_binary_response_getkq;
 266
 267     /**
 268      * Definition of the packet used by the delete command
 269      * See section 4
 270      */
 271     typedef protocol_binary_request_no_extras protocol_binary_request_delete;
 272
 273     /**
 274      * Definition of the packet returned by the delete command
 275      * See section 4
 276      */
 277     typedef protocol_binary_response_no_extras protocol_binary_response_delete;
 278
 279     /**
 280      * Definition of the packet used by the flush command
 281      * See section 4
 282      * Please note that the expiration field is optional, so remember to see
 283      * check the header.bodysize to see if it is present.
 284      */
 285     typedef union {
 286         struct {
 287             protocol_binary_request_header header;
 288             struct {
 289                 uint32_t expiration;
 290             } body;
 291         } message;
 292         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 293     } protocol_binary_request_flush;
 294
 295     /**
 296      * Definition of the packet returned by the flush command
 297      * See section 4
 298      */
 299     typedef protocol_binary_response_no_extras protocol_binary_response_flush;
 300
 301     /**
 302      * Definition of the packet used by set, add and replace
 303      * See section 4
 304      */
 305     typedef union {
 306         struct {
 307             protocol_binary_request_header header;
 308             struct {
 309                 uint32_t flags;
 310                 uint32_t expiration;
 311             } body;
 312         } message;
 313         uint8_t bytes[sizeof(protocol_binary_request_header) + 8];
 314     } protocol_binary_request_set;
 315     typedef protocol_binary_request_set protocol_binary_request_add;
 316     typedef protocol_binary_request_set protocol_binary_request_replace;
 317
 318     /**
 319      * Definition of the packet returned by set, add and replace
 320      * See section 4
 321      */
 322     typedef protocol_binary_response_no_extras protocol_binary_response_set;
 323     typedef protocol_binary_response_no_extras protocol_binary_response_add;
 324     typedef protocol_binary_response_no_extras protocol_binary_response_replace;
 325
 326     /**
 327      * Definition of the noop packet
 328      * See section 4
 329      */
 330     typedef protocol_binary_request_no_extras protocol_binary_request_noop;
 331
 332     /**
 333      * Definition of the packet returned by the noop command
 334      * See section 4
 335      */
 336     typedef protocol_binary_response_no_extras protocol_binary_response_noop;
 337
 338     /**
 339      * Definition of the structure used by the increment and decrement
 340      * command.
 341      * See section 4
 342      */
 343     typedef union {
 344         struct {
 345             protocol_binary_request_header header;
 346             struct {
 347                 uint64_t delta;
 348                 uint64_t initial;
 349                 uint32_t expiration;
 350             } body;
 351         } message;
 352         uint8_t bytes[sizeof(protocol_binary_request_header) + 20];
 353     } protocol_binary_request_incr;
 354     typedef protocol_binary_request_incr protocol_binary_request_decr;
 355
 356     /**
 357      * Definition of the response from an incr or decr command
 358      * command.
 359      * See section 4
 360      */
 361     typedef union {
 362         struct {
 363             protocol_binary_response_header header;
 364             struct {
 365                 uint64_t value;
 366             } body;
 367         } message;
 368         uint8_t bytes[sizeof(protocol_binary_response_header) + 8];
 369     } protocol_binary_response_incr;
 370     typedef protocol_binary_response_incr protocol_binary_response_decr;
 371
 372     /**
 373      * Definition of the quit
 374      * See section 4
 375      */
 376     typedef protocol_binary_request_no_extras protocol_binary_request_quit;
 377
 378     /**
 379      * Definition of the packet returned by the quit command
 380      * See section 4
 381      */
 382     typedef protocol_binary_response_no_extras protocol_binary_response_quit;
 383
 384     /**
 385      * Definition of the packet used by append and prepend command
 386      * See section 4
 387      */
 388     typedef protocol_binary_request_no_extras protocol_binary_request_append;
 389     typedef protocol_binary_request_no_extras protocol_binary_request_prepend;
 390
 391     /**
 392      * Definition of the packet returned from a successful append or prepend
 393      * See section 4
 394      */
 395     typedef protocol_binary_response_no_extras protocol_binary_response_append;
 396     typedef protocol_binary_response_no_extras protocol_binary_response_prepend;
 397
 398     /**
 399      * Definition of the packet used by the version command
 400      * See section 4
 401      */
 402     typedef protocol_binary_request_no_extras protocol_binary_request_version;
 403
 404     /**
 405      * Definition of the packet returned from a successful version command
 406      * See section 4
 407      */
 408     typedef protocol_binary_response_no_extras protocol_binary_response_version;
 409
 410
 411     /**
 412      * Definition of the packet used by the stats command.
 413      * See section 4
 414      */
 415     typedef protocol_binary_request_no_extras protocol_binary_request_stats;
 416
 417     /**
 418      * Definition of the packet returned from a successful stats command
 419      * See section 4
 420      */
 421     typedef protocol_binary_response_no_extras protocol_binary_response_stats;
 422
 423     /**
 424      * Definition of the packet used by the verbosity command
 425      */
 426     typedef union {
 427         struct {
 428             protocol_binary_request_header header;
 429             struct {
 430                 uint32_t level;
 431             } body;
 432         } message;
 433         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 434     } protocol_binary_request_verbosity;
 435
 436     /**
 437      * Definition of the packet returned from the verbosity command
 438      */
 439     typedef protocol_binary_response_no_extras protocol_binary_response_verbosity;
 440
 441     /**
 442      * Definition of the packet used by the touch command.
 443      */
 444     typedef union {
 445         struct {
 446             protocol_binary_request_header header;
 447             struct {
 448                 uint32_t expiration;
 449             } body;
 450         } message;
 451         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 452     } protocol_binary_request_touch;
 453
 454     /**
 455      * Definition of the packet returned from the touch command
 456      */
 457     typedef protocol_binary_response_no_extras protocol_binary_response_touch;
 458
 459     /**
 460      * Definition of the packet used by the GAT(Q) command.
 461      */
 462     typedef union {
 463         struct {
 464             protocol_binary_request_header header;
 465             struct {
 466                 uint32_t expiration;
 467             } body;
 468         } message;
 469         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 470     } protocol_binary_request_gat;
 471
 472     typedef protocol_binary_request_gat protocol_binary_request_gatq;
 473
 474     /**
 475      * Definition of the packet returned from the GAT(Q)
 476      */
 477     typedef protocol_binary_response_get protocol_binary_response_gat;
 478     typedef protocol_binary_response_get protocol_binary_response_gatq;
 479
 480
 481     /**
 482      * Definition of a request for a range operation.
 483      * See http://code.google.com/p/memcached/wiki/RangeOps
 484      *
 485      * These types are used for range operations and exist within
 486      * this header for use in other projects.  Range operations are
 487      * not expected to be implemented in the memcached server itself.
 488      */
 489     typedef union {
 490         struct {
 491             protocol_binary_response_header header;
 492             struct {
 493                 uint16_t size;
 494                 uint8_t  reserved;
 495                 uint8_t  flags;
 496                 uint32_t max_results;
 497             } body;
 498         } message;
 499         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 500     } protocol_binary_request_rangeop;
 501
 502     typedef protocol_binary_request_rangeop protocol_binary_request_rget;
 503     typedef protocol_binary_request_rangeop protocol_binary_request_rset;
 504     typedef protocol_binary_request_rangeop protocol_binary_request_rsetq;
 505     typedef protocol_binary_request_rangeop protocol_binary_request_rappend;
 506     typedef protocol_binary_request_rangeop protocol_binary_request_rappendq;
 507     typedef protocol_binary_request_rangeop protocol_binary_request_rprepend;
 508     typedef protocol_binary_request_rangeop protocol_binary_request_rprependq;
 509     typedef protocol_binary_request_rangeop protocol_binary_request_rdelete;
 510     typedef protocol_binary_request_rangeop protocol_binary_request_rdeleteq;
 511     typedef protocol_binary_request_rangeop protocol_binary_request_rincr;
 512     typedef protocol_binary_request_rangeop protocol_binary_request_rincrq;
 513     typedef protocol_binary_request_rangeop protocol_binary_request_rdecr;
 514     typedef protocol_binary_request_rangeop protocol_binary_request_rdecrq;
 515
 516
 517     /**
 518      * Definition of tap commands
 519      * See To be written
 520      *
 521      */
 522
 523     typedef union {
 524         struct {
 525             protocol_binary_request_header header;
 526             struct {
 527                 /**
 528                  * flags is a bitmask used to set properties for the
 529                  * the connection. Please In order to be forward compatible
 530                  * you should set all undefined bits to 0.
 531                  *
 532                  * If the bit require extra userdata, it will be stored
 533                  * in the user-data field of the body (passed to the engine
 534                  * as enginespeciffic). That means that when you parse the
 535                  * flags and the engine-specific data, you have to work your
 536                  * way from bit 0 and upwards to find the correct offset for
 537                  * the data.
 538                  *
 539                  */
 540                 uint32_t flags;
 541
 542                 /**
 543                  * Backfill age
 544                  *
 545                  * By using this flag you can limit the amount of data being
 546                  * transmitted. If you don't specify a backfill age, the
 547                  * server will transmit everything it contains.
 548                  *
 549                  * The first 8 bytes in the engine specific data contains
 550                  * the oldest entry (from epoc) you're interested in.
 551                  * Specifying a time in the future (for the server you are
 552                  * connecting to), will cause it to start streaming current
 553                  * changes.
 554                  */
 555 #define TAP_CONNECT_FLAG_BACKFILL 0x01
 556                 /**
 557                  * Dump will cause the server to send the data stored on the
 558                  * server, but disconnect when the keys stored in the server
 559                  * are transmitted.
 560                  */
 561 #define TAP_CONNECT_FLAG_DUMP 0x02
 562                 /**
 563                  * The body contains a list of 16 bits words in network byte
 564                  * order specifying the vbucket ids to monitor. The first 16
 565                  * bit word contains the number of buckets. The number of 0
 566                  * means "all buckets"
 567                  */
 568 #define TAP_CONNECT_FLAG_LIST_VBUCKETS 0x04
 569                 /**
 570                  * The responsibility of the vbuckets is to be transferred
 571                  * over to the caller when all items are transferred.
 572                  */
 573 #define TAP_CONNECT_FLAG_TAKEOVER_VBUCKETS 0x08
 574                 /**
 575                  * The tap consumer supports ack'ing of tap messages
 576                  */
 577 #define TAP_CONNECT_SUPPORT_ACK 0x10
 578                 /**
 579                  * The tap consumer would prefer to just get the keys
 580                  * back. If the engine supports this it will set
 581                  * the TAP_FLAG_NO_VALUE flag in each of the
 582                  * tap packets returned.
 583                  */
 584 #define TAP_CONNECT_REQUEST_KEYS_ONLY 0x20
 585                 /**
 586                  * The body contains a list of (vbucket_id, last_checkpoint_id)
 587                  * pairs. This provides the checkpoint support in TAP streams.
 588                  * The last checkpoint id represents the last checkpoint that
 589                  * was successfully persisted.
 590                  */
 591 #define TAP_CONNECT_CHECKPOINT 0x40
 592                 /**
 593                  * The tap consumer is a registered tap client, which means that
 594                  * the tap server will maintain its checkpoint cursor permanently.
 595                  */
 596 #define TAP_CONNECT_REGISTERED_CLIENT 0x80
 597             } body;
 598         } message;
 599         uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
 600     } protocol_binary_request_tap_connect;
 601
 602     typedef union {
 603         struct {
 604             protocol_binary_request_header header;
 605             struct {
 606                 struct {
 607                     uint16_t enginespecific_length;
 608                     /*
 609                      * The flag section support the following flags
 610                      */
 611                     /**
 612                      * Request that the consumer send a response packet
 613                      * for this packet. The opaque field must be preserved
 614                      * in the response.
 615                      */
 616 #define TAP_FLAG_ACK 0x01
 617                     /**
 618                      * The value for the key is not included in the packet
 619                      */
 620 #define TAP_FLAG_NO_VALUE 0x02
 621                     uint16_t flags;
 622                     uint8_t  ttl;
 623                     uint8_t  res1;
 624                     uint8_t  res2;
 625                     uint8_t  res3;
 626                 } tap;
 627                 struct {
 628                     uint32_t flags;
 629                     uint32_t expiration;
 630                 } item;
 631             } body;
 632         } message;
 633         uint8_t bytes[sizeof(protocol_binary_request_header) + 16];
 634     } protocol_binary_request_tap_mutation;
 635
 636     typedef union {
 637         struct {
 638             protocol_binary_request_header header;
 639             struct {
 640                 struct {
 641                     uint16_t enginespecific_length;
 642                     /**
 643                      * See the definition of the flags for
 644                      * protocol_binary_request_tap_mutation for a description
 645                      * of the available flags.
 646                      */
 647                     uint16_t flags;
 648                     uint8_t  ttl;
 649                     uint8_t  res1;
 650                     uint8_t  res2;
 651                     uint8_t  res3;
 652                 } tap;
 653             } body;
 654         } message;
 655         uint8_t bytes[sizeof(protocol_binary_request_header) + 8];
 656     } protocol_binary_request_tap_no_extras;
 657
 658     typedef protocol_binary_request_tap_no_extras protocol_binary_request_tap_delete;
 659     typedef protocol_binary_request_tap_no_extras protocol_binary_request_tap_flush;
 660     typedef protocol_binary_request_tap_no_extras protocol_binary_request_tap_opaque;
 661     typedef protocol_binary_request_tap_no_extras protocol_binary_request_tap_vbucket_set;
 662
 663
 664     /**
 665      * Definition of the packet used by the scrub.
 666      */
 667     typedef protocol_binary_request_no_extras protocol_binary_request_scrub;
 668
 669     /**
 670      * Definition of the packet returned from scrub.
 671      */
 672     typedef protocol_binary_response_no_extras protocol_binary_response_scrub;
 673
 674
 675     /**
 676      * Definition of the packet used by set vbucket
 677      */
 678     typedef union {
 679         struct {
 680             protocol_binary_request_header header;
 681             struct {
 682                 vbucket_state_t state;
 683             } body;
 684         } message;
 685         uint8_t bytes[sizeof(protocol_binary_request_header) + sizeof(vbucket_state_t)];
 686     } protocol_binary_request_set_vbucket;
 687     /**
 688      * Definition of the packet returned from set vbucket
 689      */
 690     typedef protocol_binary_response_no_extras protocol_binary_response_set_vbucket;
 691     /**
 692      * Definition of the packet used by del vbucket
 693      */
 694     typedef protocol_binary_request_no_extras protocol_binary_request_del_vbucket;
 695     /**
 696      * Definition of the packet returned from del vbucket
 697      */
 698     typedef protocol_binary_response_no_extras protocol_binary_response_del_vbucket;
 699
 700     /**
 701      * Definition of the packet used by get vbucket
 702      */
 703     typedef protocol_binary_request_no_extras protocol_binary_request_get_vbucket;
 704
 705     /**
 706      * Definition of the packet returned from get vbucket
 707      */
 708     typedef union {
 709         struct {
 710             protocol_binary_response_header header;
 711             struct {
 712                 vbucket_state_t state;
 713             } body;
 714         } message;
 715         uint8_t bytes[sizeof(protocol_binary_response_header) + sizeof(vbucket_state_t)];
 716     } protocol_binary_response_get_vbucket;
 717
 718
 719     /**
 720      * @}
 721      */
 722
 723 #ifdef __cplusplus
 724 }
 725 #endif
 726 #endif /* PROTOCOL_BINARY_H */