-Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
- This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
- These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
+the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
Compilers and Options
=====================
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
- You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
Optional Features
=================
- Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
Specifying the System Type
==========================
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
Sharing Defaults
================
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
Defining Variables
==================
- Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
./configure CC=/usr/local2/bin/gcc
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
`configure' Invocation
======================
- `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
`--help'
`-h'
#!/bin/sh
-set -x
-aclocal
-#libtoolize --copy
-autoheader
-automake --add-missing --copy
-autoconf
+# Taken from lighthttpd server (BSD). Thanks Jan!
+# Run this to generate all the initial makefiles, etc.
+
+die() { echo "$@"; exit 1; }
+
+# LIBTOOLIZE=${LIBTOOLIZE:-libtoolize}
+LIBTOOLIZE_FLAGS=" --automake --copy --force"
+# ACLOCAL=${ACLOCAL:-aclocal}
+# AUTOHEADER=${AUTOHEADER:-autoheader}
+# AUTOMAKE=${AUTOMAKE:-automake}
+AUTOMAKE_FLAGS="--add-missing --copy --force"
+# AUTOCONF=${AUTOCONF:-autoconf}
+
+ARGV0=$0
+ARGS="$@"
+
+
+run() {
+ echo "$ARGV0: running \`$@' $ARGS"
+ $@ $ARGS
+}
+
+## jump out if one of the programs returns 'false'
+set -e
+
+## on macosx glibtoolize, others have libtool
+if test x$LIBTOOLIZE = x; then
+ if test \! "x`which glibtoolize 2> /dev/null | grep -v '^no'`" = x; then
+ LIBTOOLIZE=glibtoolize
+ elif test \! "x`which libtoolize-1.5 2> /dev/null | grep -v '^no'`" = x; then
+ LIBTOOLIZE=libtoolize-1.5
+ elif test \! "x`which libtoolize 2> /dev/null | grep -v '^no'`" = x; then
+ LIBTOOLIZE=libtoolize
+ else
+ echo "libtoolize 1.5.x wasn't found, exiting"; exit 0
+ fi
+fi
+
+## suse has aclocal and aclocal-1.9
+if test x$ACLOCAL = x; then
+ if test \! "x`which aclocal-1.9 2> /dev/null | grep -v '^no'`" = x; then
+ ACLOCAL=aclocal-1.9
+ elif test \! "x`which aclocal19 2> /dev/null | grep -v '^no'`" = x; then
+ ACLOCAL=aclocal19
+ elif test \! "x`which aclocal 2> /dev/null | grep -v '^no'`" = x; then
+ ACLOCAL=aclocal
+ else
+ echo "automake 1.9.x (aclocal) wasn't found, exiting"; exit 0
+ fi
+fi
+
+if test x$AUTOMAKE = x; then
+ if test \! "x`which automake-1.9 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOMAKE=automake-1.9
+ elif test \! "x`which automake19 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOMAKE=automake19
+ elif test \! "x`which automake 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOMAKE=automake
+ else
+ echo "automake 1.9.x wasn't found, exiting"; exit 0
+ fi
+fi
+
+
+## macosx has autoconf-2.59 and autoconf-2.60
+if test x$AUTOCONF = x; then
+ if test \! "x`which autoconf-2.59 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOCONF=autoconf-2.59
+ elif test \! "x`which autoconf259 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOCONF=autoconf259
+ elif test \! "x`which autoconf 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOCONF=autoconf
+ else
+ echo "autoconf 2.59+ wasn't found, exiting"; exit 0
+ fi
+fi
+
+if test x$AUTOHEADER = x; then
+ if test \! "x`which autoheader-2.59 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOHEADER=autoheader-2.59
+ elif test \! "x`which autoheader259 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOHEADER=autoheader259
+ elif test \! "x`which autoheader 2> /dev/null | grep -v '^no'`" = x; then
+ AUTOHEADER=autoheader
+ else
+ echo "autoconf 2.59+ (autoheader) wasn't found, exiting"; exit 0
+ fi
+fi
+
+
+run $ACLOCAL $ACLOCAL_FLAGS || die "Can't execute aclocal"
+run $AUTOHEADER || die "Can't execute autoheader"
+
+# --force means overwrite ltmain.sh script if it already exists
+run $LIBTOOLIZE $LIBTOOLIZE_FLAGS || die "Can't execute libtoolize"
+
+# --add-missing instructs automake to install missing auxiliary files
+# and --force to overwrite them if they already exist
+run $AUTOMAKE $AUTOMAKE_FLAGS || die "Can't execute automake"
+run $AUTOCONF || die "Can't execute autoconf"
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+# Inc.
-timestamp='2002-07-23'
+timestamp='2006-07-02'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Originally written by Per Bothner <per@bothner.com>.
# Please send patches to <config-patches@gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
-# This shell variable is my proudest work .. or something. --bje
+# Portable tmp directory creation inspired by the Autoconf team.
-set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ;
-(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old)
- || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ;
-dummy=$tmpdir/dummy ;
-files="$dummy.c $dummy.o $dummy.rel $dummy" ;
-trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ;
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
,,) echo "int x;" > $dummy.c ;
for c in cc gcc c89 c99 ; do
- if ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; then
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
- rm -f $files ;
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found ;
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;
-unset files'
+esac ; set_cc_for_build= ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
;;
esac
# The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
+ case $UNAME_RELEASE in
+ *4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- eval $set_cc_for_build
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- 3-1307)
- UNAME_MACHINE="alphaev7"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy && rmdir $tmpdir
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
- exit 0 ;;
+ exit ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
- exit 0 ;;
+ exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
- exit 0;;
+ exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
+ exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
+ exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
- exit 0 ;;
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
+ exit ;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
else
echo pyramid-pyramid-bsd
fi
- exit 0 ;;
+ exit ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
+ sparc) echo sparc-icl-nx7; exit ;;
esac ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
i86pc:SunOS:5.*:*)
echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
+ exit ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
- exit 0 ;;
+ exit ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
- exit 0 ;;
+ exit ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
exit (-1);
}
EOF
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
- exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS)
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
- exit 0 ;;
+ exit ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
- exit 0 ;;
+ exit ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
- exit 0 ;;
+ exit ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
- exit 0 ;;
+ exit ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
- exit 0 ;;
+ exit ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
- exit 0 ;;
+ exit ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
+ exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
echo i386-ibm-aix
- exit 0 ;;
+ exit ;;
ia64:AIX:*:*)
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
eval $set_cc_for_build
exit(0);
}
EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
- echo rs6000-ibm-aix3.2.5
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
- exit 0 ;;
+ exit ;;
*:AIX:*:[45])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
- exit 0 ;;
+ exit ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
- exit 0 ;;
+ exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
+ exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
- exit 0 ;;
+ exit ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
- exit 0 ;;
+ exit ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
- exit 0 ;;
+ exit ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
- exit 0 ;;
+ exit ;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy && rmdir $tmpdir
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
ia64:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
3050*:HI-UX:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
exit (0);
}
EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
- exit 0 ;;
+ exit ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
- exit 0 ;;
+ exit ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
- exit 0 ;;
+ exit ;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
- exit 0 ;;
+ exit ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
- exit 0 ;;
+ exit ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
- exit 0 ;;
+ exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
- exit 0 ;;
+ exit ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
- exit 0 ;;
+ exit ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*T3E:*:*:*)
echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- rm -f $dummy.c && rmdir $tmpdir
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
- exit 0 ;;
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
+ exit ;;
i*:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:3*)
- echo i386-pc-interix3
- exit 0 ;;
+ exit ;;
+ x86:Interix*:[3456]*)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ EM64T:Interix*:[3456]*)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
- exit 0 ;;
+ echo i586-pc-interix
+ exit ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
- exit 0 ;;
+ exit ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
*:GNU:*:*)
+ # the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
+ exit ;;
arm*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
mips:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- rm -f $dummy.c && rmdir $tmpdir
- test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^CPU/{
+ s: ::g
+ p
+ }'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^CPU/{
+ s: ::g
+ p
+ }'`"
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
ppc:Linux:*:*)
echo powerpc-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
ppc64:Linux:*:*)
echo powerpc64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
EV5) UNAME_MACHINE=alphaev5 ;;
objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
PA8*) echo hppa2.0-unknown-linux-gnu ;;
*) echo hppa-unknown-linux-gnu ;;
esac
- exit 0 ;;
+ exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
echo hppa64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
sh*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
x86_64:Linux:*:*)
echo x86_64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
i*86:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
;;
a.out-i386-linux)
echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
+ exit ;;
coff-i386)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
+ exit ;;
"")
# Either a pre-BFD a.out linker (linux-gnuoldld) or
# one that does not give us useful --help.
echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
+ exit ;;
esac
# Determine whether the default compiler is a.out or elf
eval $set_cc_for_build
LIBC=gnulibc1
# endif
#else
- #ifdef __INTEL_COMPILER
+ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
LIBC=gnu
#else
LIBC=gnuaout
#endif
#endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- rm -f $dummy.c && rmdir $tmpdir
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+ /^LIBC/{
+ s: ::g
+ p
+ }'`"
+ test x"${LIBC}" != x && {
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit
+ }
+ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
echo i386-sequent-sysv4
- exit 0 ;;
+ exit ;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
- exit 0 ;;
- i*86:*:5:[78]*)
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i386.
echo i386-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
- exit 0 ;;
+ exit ;;
paragon:*:*:*)
echo i860-intel-osf1
- exit 0 ;;
+ exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
- exit 0 ;;
+ exit ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
+ && { echo i486-ncr-sysv4; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
else
echo ns32k-sni-sysv
fi
- exit 0 ;;
+ exit ;;
PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
# says <Richard.M.Bartel@ccMail.Census.GOV>
echo i586-unisys-sysv4
- exit 0 ;;
+ exit ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes@openmarket.com>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
- exit 0 ;;
+ exit ;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
echo i860-stratus-sysv4
- exit 0 ;;
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
echo hppa1.1-stratus-vos
- exit 0 ;;
+ exit ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
- exit 0 ;;
+ exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
echo mips-nec-sysv${UNAME_RELEASE}
else
echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
- exit 0 ;;
+ exit ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
- exit 0 ;;
+ exit ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
- exit 0 ;;
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = "x86"; then
UNAME_MACHINE=pc
fi
echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
- exit 0 ;;
- NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*)
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
- exit 0 ;;
+ exit ;;
BS2000:POSIX*:*:*)
echo bs2000-siemens-sysv
- exit 0 ;;
+ exit ;;
DS/*:UNIX_System_V:*:*)
echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
UNAME_MACHINE="$cputype"
fi
echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
+ exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
- exit 0 ;;
+ exit ;;
*:TENEX:*:*)
echo pdp10-unknown-tenex
- exit 0 ;;
+ exit ;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
echo pdp10-dec-tops20
- exit 0 ;;
+ exit ;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
echo pdp10-xkl-tops20
- exit 0 ;;
+ exit ;;
*:TOPS-20:*:*)
echo pdp10-unknown-tops20
- exit 0 ;;
+ exit ;;
*:ITS:*:*)
echo pdp10-unknown-its
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
+ printf ("arm-acorn-riscix\n"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
}
EOF
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-rm -f $dummy.c $dummy && rmdir $tmpdir
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
# Convex versions that predate uname can use getsysinfo(1)
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
c34*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
c38*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
c4*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
esac
fi
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from
- ftp://ftp.gnu.org/pub/gnu/config/
+ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
If the version you run ($0) is already up to date, please
send the following data and any information you think might be
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+# Inc.
-timestamp='2002-07-03'
+timestamp='2006-09-20'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Please send patches to <config-patches@gnu.org>. Submit a context
# diff and a properly formatted ChangeLog entry.
#
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
*local*)
# First pass through any local machine types.
echo $1
- exit 0;;
+ exit ;;
* )
break ;;
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
+ -apple | -axis | -knuth | -cray)
os=
basic_machine=$1
;;
-hiux*)
os=-hiuxwe2
;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
| a29k \
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
| fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
- | ip2k \
- | m32r | m68000 | m68k | m88k | mcore \
+ | ip2k | iq2000 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
+ | mips64vr | mips64vrel \
| mips64orion | mips64orionel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
| mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | mt \
+ | msp430 \
+ | nios | nios2 \
| ns16k | ns32k \
- | openrisc | or32 \
+ | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic80 | tron \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xscale | xstormy16 | xtensa \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c54x-* \
- | clipper-* | cydra-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* \
- | m32r-* \
+ | ip2k-* | iq2000-* \
+ | m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
+ | mips64vr-* | mips64vrel-* \
| mips64orion-* | mips64orionel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipstx39 | mipstx39el \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nios-* | nios2-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
;;
basic_machine=a29k-amd
os=-udi
;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
basic_machine=a29k-none
os=-bsd
;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
amdahl)
basic_machine=580-amdahl
os=-sysv
basic_machine=j90-cray
os=-unicos
;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16c)
+ basic_machine=cr16c-unknown
+ os=-elf
+ ;;
crds | unos)
basic_machine=m68k-crds
;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
basic_machine=m88k-motorola
os=-sysv3
;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
monitor)
basic_machine=m68k-rom68k
os=-coff
basic_machine=i386-pc
os=-msdos
;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
mvs)
basic_machine=i370-ibm
os=-mvs
basic_machine=hppa1.1-oki
os=-proelf
;;
- or32 | or32-*)
+ openrisc | openrisc-*)
basic_machine=or32-unknown
- os=-coff
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
pbb)
basic_machine=m68k-tti
;;
- pc532 | pc532-*)
+ pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
- pentiumpro | p6 | 6x86 | athlon)
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
basic_machine=i686-pc
;;
- pentiumii | pentium2)
+ pentiumii | pentium2 | pentiumiii | pentium3)
basic_machine=i686-pc
;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- pentiumii-* | pentium2-*)
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
pn)
basic_machine=pn-gould
;;
power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
- ;;
+ ;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
- ;;
+ ;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
- ;;
+ ;;
ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppc64le | powerpc64little | ppc64-le | powerpc64-little)
basic_machine=powerpc64le-unknown
- ;;
+ ;;
ppc64le-* | powerpc64little-*)
basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
basic_machine=i586-unknown
os=-pw32
;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
basic_machine=a29k-amd
os=-udi
;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
sequent)
basic_machine=i386-sequent
;;
basic_machine=sh-hitachi
os=-hms
;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
sparclite-wrs | simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
- sv1)
+ sv1)
basic_machine=sv1-cray
os=-unicos
;;
basic_machine=i386-sequent
os=-dynix
;;
- t3d)
- basic_machine=alpha-cray
- os=-unicos
- ;;
t3e)
basic_machine=alphaev5-cray
os=-unicos
basic_machine=tic54x-unknown
os=-coff
;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
tx39)
basic_machine=mipstx39-unknown
;;
tower | tower-32)
basic_machine=m68k-ncr
;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
udi29k)
basic_machine=a29k-amd
os=-udi
os=-vms
;;
vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
+ basic_machine=f301-fujitsu
+ ;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
basic_machine=hppa1.1-winbond
os=-proelf
;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
;;
- xps | xps100)
+ xps | xps100)
basic_machine=xps100-honeywell
;;
ymp)
romp)
basic_machine=romp-ibm
;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
rs6000)
basic_machine=rs6000-ibm
;;
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
+ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
basic_machine=sparc-sun
;;
- cydra)
+ cydra)
basic_machine=cydra-cydrome
;;
orion)
pmac | pmac-mpw)
basic_machine=powerpc-apple
;;
- c4x*)
- basic_machine=c4x-none
- os=-coff
- ;;
*-unknown)
# Make sure to match an already-canonicalized machine name.
;;
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
;;
esac
;;
+ -nto-qnx*)
+ ;;
-nto*)
- os=-nto-qnx
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-opened*)
os=-openedition
;;
+ -os400*)
+ os=-os400
+ ;;
-wince*)
os=-wince
;;
-atheos*)
os=-atheos
;;
+ -syllable*)
+ os=-syllable
+ ;;
-386bsd)
os=-bsd
;;
os=-rtmk-nova
;;
-ns2 )
- os=-nextstep2
+ os=-nextstep2
;;
-nsk*)
os=-nsk
-sinix*)
os=-sysv4
;;
+ -tpf*)
+ os=-tpf
+ ;;
-triton*)
os=-sysv3
;;
-xenix)
os=-xenix
;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
;;
-none)
;;
# system, and we'll never get to this point.
case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
*-acorn)
os=-riscix1.2
;;
arm*-semi)
os=-aout
;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
;;
- pdp11-*)
+ pdp11-*)
os=-none
;;
*-dec | vax-*)
*-be)
os=-beos
;;
+ *-haiku)
+ os=-haiku
+ ;;
*-ibm)
os=-aix
;;
+ *-knuth)
+ os=-mmixware
+ ;;
*-wec)
os=-proelf
;;
*-next)
os=-nextstep3
;;
- *-gould)
+ *-gould)
os=-sysv
;;
- *-highlevel)
+ *-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
- *-sgi)
+ *-sgi)
os=-irix
;;
- *-siemens)
+ *-siemens)
os=-sysv4
;;
*-masscomp)
-mvs* | -opened*)
vendor=ibm
;;
+ -os400*)
+ vendor=ibm
+ ;;
-ptx*)
vendor=sequent
;;
+ -tpf*)
+ vendor=ibm
+ ;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
esac
echo $basic_machine$os
-exit 0
+exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
#!/bin/sh
-#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2006-10-14.15
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
+chowncmd=
+chgrpcmd=
+stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ shift
+ shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- :
-fi
+ -T) no_target_directory=true
+ shift
+ continue;;
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
+ --version) echo "$0 $scriptversion"; exit $?;;
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
+ --) shift
+ break;;
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- :
- fi
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
+ *) break;;
+ esac
+done
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- :
- fi
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
fi
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- :
- fi
-
- pathcomp="${pathcomp}/"
-done
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
fi
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
-else
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
-# If we're going to rename the final executable, determine the name now.
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
+ mkdir_mode=
fi
-# don't allow the sed command to completely eliminate the filename
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
+ shift
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
else
- :
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
+
+ trap '' 0
+ fi
+done
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# function.
progpath="$0"
-# RH: define SED for historic ltconfig's generated by Libtool 1.3
-[ -z "$SED" ] && SED=sed
-
# The name of this program:
progname=`echo "$progpath" | $SED $basename`
modename="$progname"
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42)"
-
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
Xsed="${SED}"' -e 1s/^X//'
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
# test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
- SP2NL="tr '\100' '\n'"
- NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
;;
- *) # Assume ASCII based system
- SP2NL="tr '\040' '\012'"
- NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
;;
esac
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
- save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
- save_LANG="$LANG"; LANG=C; export LANG
-fi
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ fi"
+done
# Make sure IFS has a sensible default
-: ${IFS="
-"}
+lt_nl='
+'
+IFS=" $lt_nl"
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
show="$echo"
show_help=
execute_dlfiles=
+duplicate_deps=no
+preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
#####################################
# Shell function definitions:
# This seems to be the best place for them
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $mkdir "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || {
+ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+ exit $EXIT_FAILURE
+ }
+ fi
+
+ $echo "X$my_tmpdir" | $Xsed
+}
+
+
# func_win32_libid arg
# return the library type of file 'arg'
#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
- sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
- if test "X$win32_nmres" = "Ximport" ; then
- win32_libid_type="x86 archive import"
- else
- win32_libid_type="x86 archive static"
- fi
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
fi
;;
*DLL*)
# Only attempt this if the compiler in the base compile
# command doesn't match the default compiler.
# arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
esac
fi
}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ extracted_serial=`expr $extracted_serial + 1`
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $exit_status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
# End of Shell function definitions
#####################################
# Darwin sucks
eval std_shrext=\"$shrext_cmds\"
+disable_libs=no
+
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit $EXIT_SUCCESS
+ exit $?
;;
--config)
for tagname in $taglist; do
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit $EXIT_SUCCESS
+ exit $?
;;
--debug)
else
$echo "disable static libraries"
fi
- exit $EXIT_SUCCESS
+ exit $?
;;
--finish) mode="finish" ;;
preserve_args="$preserve_args $arg"
;;
- --tag) prevopt="--tag" prev=tag ;;
+ --tag)
+ prevopt="--tag"
+ prev=tag
+ preserve_args="$preserve_args --tag"
+ ;;
--tag=*)
set tag "$optarg" ${1+"$@"}
shift
exit $EXIT_FAILURE
fi
+case $disable_libs in
+no)
+ ;;
+shared)
+ build_libtool_libs=no
+ build_old_libs=yes
+ ;;
+static)
+ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+ ;;
+esac
+
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
for arg
do
- case "$arg_mode" in
+ case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
lastarg="$arg"
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
lastarg="\"$lastarg\""
;;
*.f90) xform=f90 ;;
*.for) xform=for ;;
*.java) xform=java ;;
+ *.obj) xform=obj ;;
esac
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
esac
done
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
if test "X$xdir" = "X$obj"; then
$run $rm $removelist
exit $EXIT_FAILURE
fi
- $echo $srcfile > "$lockfile"
+ $echo "$srcfile" > "$lockfile"
fi
if test -n "$fix_srcfile_path"; then
eval srcfile=\"$fix_srcfile_path\"
fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
$run $rm "$libobj" "${libobj}T"
fbsd_hideous_sh_bug=$base_compile
if test "$pic_mode" != no; then
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
fi
if test ! -d "${xdir}$objdir"; then
$show "$mkdir ${xdir}$objdir"
$run $mkdir ${xdir}$objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+ exit $exit_status
fi
fi
if test "$build_old_libs" = yes; then
if test "$pic_mode" != yes; then
# Don't build PIC code
- command="$base_compile $srcfile"
+ command="$base_compile $qsrcfile"
else
- command="$base_compile $srcfile $pic_flag"
+ command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
command="$command -o $obj"
no_install=no
objs=
non_pic_objects=
+ notinst_path= # paths that contain not-installed libtool libraries
precious_files_regex=
prefer_static_libs=no
preload=no
for arg
do
case $arg in
- -all-static | -static)
- if test "X$arg" = "X-all-static"; then
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
fi
if test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
- else
+ prefer_static_libs=yes
+ ;;
+ -static)
if test -z "$pic_flag" && test -n "$link_static_flag"; then
dlopen_self=$dlopen_self_static
fi
- fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
build_libtool_libs=no
build_old_libs=yes
- prefer_static_libs=yes
break
;;
esac
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
prev=
continue
;;
+ darwin_framework|darwin_framework_skip)
+ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
continue
;;
+ -framework|-arch|-isysroot)
+ case " $CC " in
+ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
+ prev=darwin_framework_skip ;;
+ *) compiler_flags="$compiler_flags $arg"
+ prev=darwin_framework ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit $EXIT_FAILURE
+ absdir="$dir"
+ notinst_path="$notinst_path $dir"
fi
dir="$absdir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
*) dllsearchpath="$dllsearchpath:$dir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
continue
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-pw32* | *-*-beos*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
# These systems don't actually have a C or math library (as such)
continue
;;
- *-*-mingw* | *-*-os2*)
+ *-*-os2*)
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
# Rhapsody C and math libraries are in the System framework
deplibs="$deplibs -framework System"
continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
- deplibs="$deplibs $arg"
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
continue
;;
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -pg pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
esac
compile_command="$compile_command $arg"
finalize_command="$finalize_command $arg"
- if test "$with_gcc" = "yes" ; then
- compiler_flags="$compiler_flags $arg"
- fi
+ compiler_flags="$compiler_flags $arg"
continue
;;
continue
;;
- -static)
+ -static | -static-libtool-libs)
# The effects of -static are defined in a previous loop.
# We used to do the same as -all-static on platforms that
# didn't have a PIC flag, but the assumption that the effects
if test -z "$pic_object" || test "$pic_object" = none ; then
arg="$non_pic_object"
fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
fi
else
# Only an error if not doing a dry-run.
if test ! -d "$output_objdir"; then
$show "$mkdir $output_objdir"
$run $mkdir $output_objdir
- status=$?
- if test "$status" -ne 0 && test ! -d "$output_objdir"; then
- exit $status
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+ exit $exit_status
fi
fi
newlib_search_path=
need_relink=no # whether we're linking any uninstalled libtool libraries
notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
case $linkmode in
lib)
passes="conv link"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- deplibs="$deplib $deplibs"
+ compiler_flags="$compiler_flags $deplib"
fi
continue
;;
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
for search_ext in .la $std_shrext .so .a; do
fi
case $linkmode in
lib)
- if test "$deplibs_check_method" != pass_all; then
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive $deplib."
$echo "*** I have the capability to make that library automatically link in when"
esac # case $deplib
if test "$found" = yes || test -f "$lib"; then :
else
- $echo "$modename: cannot find the library \`$lib'" 1>&2
+ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
exit $EXIT_FAILURE
fi
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
if test "$linkmode,$pass" = "prog,link"; then
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
*" $absdir "*) ;;
- *) temp_rpath="$temp_rpath $dir" ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
esac
fi
fi
link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes ; then
+ use_static_libs=no
+ fi
if test -n "$library_names" &&
- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
if test "$installed" = no; then
notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
if test "$hardcode_direct" = no; then
add="$dir/$linklib"
case $host in
- *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
*-*-darwin* )
# if the lib is a module then we can not link against
# it, someone is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+ if /usr/bin/file -L $add 2> /dev/null |
+ $EGREP ": [^:]* bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
add_dir="-L$dir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
- case "$libdir" in
+ case $libdir in
[\\/]*)
add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
fi
fi
else
- convenience="$convenience $dir/$old_library"
- old_convenience="$old_convenience $dir/$old_library"
deplibs="$dir/$old_library $deplibs"
link_static=yes
fi
*) continue ;;
esac
case " $deplibs " in
- *" $depdepl "*) ;;
- *) deplibs="$depdepl $deplibs" ;;
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
esac
case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$deplibs $path" ;;
+ *" $depdepl "*) ;;
+ *) deplibs="$depdepl $deplibs" ;;
esac
done
fi # link_all_deplibs != no
# which has an extra 1 added just for fun
#
case $version_type in
- darwin|linux|osf|windows)
+ darwin|linux|osf|windows|none)
current=`expr $number_major + $number_minor`
age="$number_minor"
revision="$number_revision"
# Check that each of the things are valid numbers.
case $current in
- [0-9]*) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $revision in
- [0-9]*) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
esac
case $age in
- [0-9]*) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
exit $EXIT_FAILURE
;;
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
fi
# Eliminate all temporary directories.
- for path in $notinst_path; do
- lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
- deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
- dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
- done
+# for path in $notinst_path; do
+# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+# done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
;;
*)
# Add libc to deplibs on all other systems if necessary.
int main() { return 0; }
EOF
$rm conftest
- $LTCC -o conftest conftest.c $deplibs
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
ldd_output=`ldd conftest`
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
- if test "$name" != "" && test "$name" -ne "0"; then
+ if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
# Error occurred in the first compile. Let's try to salvage
# the situation: Compile a separate program for each library.
for i in $deplibs; do
- name="`expr $i : '-l\(.*\)'`"
+ name=`expr $i : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
$rm conftest
- $LTCC -o conftest conftest.c $i
- # Did it work?
- if test "$?" -eq 0 ; then
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
droppeddeps=yes
$echo
$echo "*** Warning! Library $i is needed by this library but I was not able to"
- $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** make it link in! You will probably need to install it or some"
$echo "*** library that it depends on before this library will be fully"
$echo "*** functional. Installing it before continuing would be even better."
fi
set dummy $deplibs_check_method
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test "$name" != "" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
set dummy $deplibs_check_method
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
for a_deplib in $deplibs; do
- name="`expr $a_deplib : '-l\(.*\)'`"
+ name=`expr $a_deplib : '-l\(.*\)'`
# If $name is empty we are operating on a -L argument.
if test -n "$name" && test "$name" != "0"; then
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
deplibs=$newdeplibs
fi
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+
# All the library-specific variables (install_libdir is set above).
library_names=
old_library=
fi
lib="$output_objdir/$realname"
+ linknames=
for link
do
linknames="$linknames $link"
# The command line is too long to execute in one step.
$show "using reloadable object file for export list..."
skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
fi
done
IFS="$save_ifs"
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
if test "X$objlist" = X ||
- { len=`expr "X$test_cmds" : ".*"` &&
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; }; then
objlist="$objlist $obj"
else
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
exit $EXIT_SUCCESS
fi
reload_conv_objs=
gentop=
# reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
wl=
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
- eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
;;
esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
compile_command="$compile_command $compile_deplibs"
finalize_command="$finalize_command $finalize_deplibs"
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
*) dllsearchpath="$dllsearchpath:$libdir";;
esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
;;
esac
done
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
+ export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
fi
fi
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
esac
# Now compile the dynamic symbol file.
- $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
- $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
# Clean up the generated files.
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
# Transform the symbol file into the correct name.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+ case $host in
+ *cygwin* | *mingw* )
+ if test -f "$output_objdir/${outputname}.def" ; then
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ else
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ fi
+ ;;
+ * )
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ ;;
+ esac
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
# really was required.
# Nullify the symbol file.
- compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
fi
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
# Replace the output file specification.
- compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
$show "$link_command"
$run eval "$link_command"
- status=$?
+ exit_status=$?
# Delete the generated files.
if test -n "$dlsyms"; then
$run $rm "$output_objdir/${outputname}S.${objext}"
fi
- exit $status
+ exit $exit_status
fi
if test -n "$shlibpath_var"; then
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
else
# fast_install is set to needless
relink_command=
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
fi
# Quote $echo for shipping.
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
- cwrapper=`$echo ${output}.exe`
- $rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+ output_name=`basename $output`
+ output_path=`dirname $output`
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
cat > $cwrappersource <<EOF
#include <malloc.h>
#include <stdarg.h>
#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#endif
#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
#endif
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
#endif
#ifndef DIR_SEPARATOR_2
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
#endif /* DIR_SEPARATOR_2 */
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
+/* -DDEBUG is fairly common in CFLAGS. */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
const char *program_name = NULL;
void * xmalloc (size_t num);
char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int check_executable(const char *path);
char * strendzap(char *str, const char *pat);
void lt_fatal (const char *message, ...);
char **newargz;
int i;
- program_name = (char *) xstrdup ((char *) basename (argv[0]));
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ DEBUG("(main) argv[0] : %s\n",argv[0]);
+ DEBUG("(main) program_name : %s\n",program_name);
newargz = XMALLOC(char *, argc+2);
EOF
- cat >> $cwrappersource <<EOF
- newargz[0] = "$SHELL";
+ cat >> $cwrappersource <<EOF
+ newargz[0] = (char *) xstrdup("$SHELL");
EOF
- cat >> $cwrappersource <<"EOF"
- newargz[1] = fnqualify(argv[0]);
+ cat >> $cwrappersource <<"EOF"
+ newargz[1] = find_executable(argv[0]);
+ if (newargz[1] == NULL)
+ lt_fatal("Couldn't find %s", argv[0]);
+ DEBUG("(main) found exe at : %s\n",newargz[1]);
/* we know the script has the same name, without the .exe */
/* so make sure newargz[1] doesn't end in .exe */
strendzap(newargz[1],".exe");
for (i = 1; i < argc; i++)
newargz[i+1] = xstrdup(argv[i]);
newargz[argc+1] = NULL;
+
+ for (i=0; i<argc+1; i++)
+ {
+ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
+ ;
+ }
+
EOF
- cat >> $cwrappersource <<EOF
+ case $host_os in
+ mingw*)
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",(char const **)newargz);
+EOF
+ ;;
+ *)
+ cat >> $cwrappersource <<EOF
execv("$SHELL",newargz);
EOF
+ ;;
+ esac
- cat >> $cwrappersource <<"EOF"
+ cat >> $cwrappersource <<"EOF"
+ return 127;
}
void *
;
}
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
{
const char *base;
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
- if (isalpha (name[0]) && name[1] == ':')
+ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
name += 2;
#endif
for (base = name; *name; name++)
if (IS_DIR_SEPARATOR (*name))
base = name + 1;
- return (char *) base;
+ return base;
+}
+
+int
+check_executable(const char * path)
+{
+ struct stat st;
+
+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0) &&
+ (
+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+ ((st.st_mode & S_IXUSR) == S_IXUSR))
+ )
+ return 1;
+ else
+ return 0;
}
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise */
char *
-fnqualify(const char *path)
+find_executable (const char* wrapper)
{
- size_t size;
- char *p;
+ int has_slash = 0;
+ const char* p;
+ const char* p_next;
+ /* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char* concat_name;
+
+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
- assert(path != NULL);
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
- /* Is it qualified already? */
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha (path[0]) && path[1] == ':')
- return xstrdup (path);
+ }
#endif
- if (IS_DIR_SEPARATOR (path[0]))
- return xstrdup (path);
- /* prepend the current directory */
- /* doesn't handle '~' */
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char* path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char* q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR(*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
lt_fatal ("getcwd failed");
- size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
- p = XMALLOC(char, size);
- sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
- return p;
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ return NULL;
}
char *
va_end (ap);
}
EOF
- # we should really use a build-platform specific compiler
- # here, but OTOH, the wrappers (shell script and this C one)
- # are only useful if you want to execute the "real" binary.
- # Since the "real" binary is built for $host, then this
- # wrapper might as well be built for $host, too.
- $run $LTCC -s -o $cwrapper $cwrappersource
- ;;
- esac
- $rm $output
- trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+ # we should really use a build-platform specific compiler
+ # here, but OTOH, the wrappers (shell script and this C one)
+ # are only useful if you want to execute the "real" binary.
+ # Since the "real" binary is built for $host, then this
+ # wrapper might as well be built for $host, too.
+ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
$echo > $output "\
#! $SHELL
Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
# Backslashes separate directories on plain windows
*-*-mingw | *-*-os2*)
$echo >> $output "\
- exec \$progdir\\\\\$program \${1+\"\$@\"}
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
"
;;
*)
$echo >> $output "\
- exec \$progdir/\$program \${1+\"\$@\"}
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
"
;;
esac
$echo >> $output "\
- \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+ \$echo \"\$0: cannot exec \$program \$*\"
exit $EXIT_FAILURE
fi
else
# The program doesn't exist.
- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
exit $EXIT_FAILURE
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
cmds=$old_archive_from_new_cmds
else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+ exit $exit_status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
objlist=
concat_cmds=
save_oldobjs=$oldobjs
- # GNU ar 2.10+ was changed to match POSIX; thus no paths are
- # encoded into archives. This makes 'ar r' malfunction in
- # this piecewise linking case whenever conflicting object
- # names appear in distinct ar calls; check, warn and compensate.
- if (for obj in $save_oldobjs
- do
- $echo "X$obj" | $Xsed -e 's%^.*/%%'
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
- $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
- AR_FLAGS=cq
- fi
+
# Is there a better way of finding the last object in the list?
for obj in $save_oldobjs
do
oldobjs="$objlist $obj"
objlist="$objlist $obj"
eval test_cmds=\"$old_archive_cmds\"
- if len=`expr "X$test_cmds" : ".*"` &&
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
test "$len" -le "$max_cmd_len"; then
:
else
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+ $echo "X$nonopt" | grep shtool > /dev/null; then
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
shift
else
install_prog=
- arg="$nonopt"
+ arg=$nonopt
fi
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
do
if test -n "$dest"; then
files="$files $dest"
- dest="$arg"
+ dest=$arg
continue
fi
case $arg in
-d) isdir=yes ;;
- -f) prev="-f" ;;
- -g) prev="-g" ;;
- -m) prev="-m" ;;
- -o) prev="-o" ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
-s)
stripme=" -s"
continue
;;
- -*) ;;
-
+ -*)
+ ;;
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
prev=
else
- dest="$arg"
+ dest=$arg
continue
fi
;;
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
arg="\"$arg\""
;;
esac
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
else
- relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
fi
$echo "$modename: warning: relinking \`$file'" 1>&2
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
for linkname
do
if test "$linkname" != "$realname"; then
- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
fi
done
fi
IFS="$save_ifs"
eval cmd=\"$cmd\"
$show "$cmd"
- $run eval "$cmd" || exit $?
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
done
IFS="$save_ifs"
fi
notinst_deplibs=
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
# Check the variables that should have been set.
done
relink_command=
- # To insure that "foo" is sourced, and not "foo.exe",
- # finese the cygwin/MSYS system by explicitly sourcing "foo."
- # which disallows the automatic-append-.exe behavior.
- case $build in
- *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
- *) wrapperdot=${wrapper} ;;
- esac
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
# If there is no directory component, then add one.
- case $file in
- */* | *\\*) . ${wrapperdot} ;;
- *) . ./${wrapperdot} ;;
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
esac
outputname=
if test "$fast_install" = no && test -n "$relink_command"; then
if test "$finalize" = yes && test -z "$run"; then
- tmpdir="/tmp"
- test -n "$TMPDIR" && tmpdir="$TMPDIR"
- tmpdir="$tmpdir/libtool-$$"
- save_umask=`umask`
- umask 0077
- if $mkdir "$tmpdir"; then
- umask $save_umask
- else
- umask $save_umask
- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
- continue
- fi
+ tmpdir=`func_mktempdir`
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
$show "$relink_command"
if $run eval "$relink_command"; then :
fi
# remove .exe since cygwin /usr/bin/install will append another
- # one anyways
+ # one anyway
case $install_prog,$host in
*/usr/bin/install*,*cygwin*)
case $file:$destfile in
# Exit here if they wanted silent mode.
test "$show" = : && exit $EXIT_SUCCESS
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
$echo "Libraries have been installed in:"
for libdir in $libdirs; do
$echo " $libdir"
$echo
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
- $echo "----------------------------------------------------------------------"
+ $echo "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
;;
fi
# Restore saved environment variables
- if test "${save_LC_ALL+set}" = set; then
- LC_ALL="$save_LC_ALL"; export LC_ALL
- fi
- if test "${save_LANG+set}" = set; then
- LANG="$save_LANG"; export LANG
- fi
+ for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ fi"
+ done
+
# Now prepare to actually exec the command.
exec_cmd="\$cmd$args"
rmfiles="$rmfiles $objdir/$n"
done
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
- if test "$mode" = uninstall; then
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
cmds=$postuninstall_cmds
IFS="$save_ifs"
fi
# FIXME: should reinstall the best remaining shared library.
- fi
+ ;;
+ esac
fi
;;
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
+ try to export only the symbols listed in SYMFILE
-export-symbols-regex REGEX
- try to export only the symbols matching REGEX
+ try to export only the symbols matching REGEX
-LLIBDIR search LIBDIR for required installed libraries
-lNAME OUTPUT-FILE requires the installed library libNAME
-module build a library that can dlopened
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -static do not do any dynamic linking of libtool libraries
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
-version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
+ specify library version info [each variable defaults to 0]
All other options (arguments beginning with \`-') are ignored.
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit $EXIT_SUCCESS
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
# configuration. But we'll never go from static-only to shared-only.
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
# ### END LIBTOOL TAG CONFIG: disable-shared
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
# ### END LIBTOOL TAG CONFIG: disable-static
# Local Variables:
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
configure_ac=configure.in
fi
-case "$1" in
+msg="missing on your system"
+
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-h|--h|--he|--hel|--help)
echo "\
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
;;
-*)
exit 1
;;
- aclocal*)
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
fi
+ ;;
+esac
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
;;
autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
;;
autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
;;
automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
;;
autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
proper tools for further handling them.
- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
+ You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
bison|yacc)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
;;
makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
touch $file
;;
tar)
shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
+ it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
esac
exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
+scriptversion=2006-05-11.19
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+IFS=" "" $nl"
errstatus=0
-dirmode=""
+dirmode=
usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
# process command line arguments
while test $# -gt 0 ; do
- case "${1}" in
- -h | --help | --h* ) # -h for help
- echo "${usage}" 1>&2; exit 0 ;;
- -m ) # -m PERM arg
- shift
- test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
- dirmode="${1}"
- shift ;;
- -- ) shift; break ;; # stop option processing
- -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option
- * ) break ;; # first non-opt arg
- esac
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
done
for file
done
case $# in
-0) exit 0 ;;
+ 0) exit 0 ;;
esac
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
case $dirmode in
-'')
- if mkdir -p -- . 2>/dev/null; then
- echo "mkdir -p -- $*"
- exec mkdir -p -- "$@"
- fi ;;
-*)
- if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
- echo "mkdir -m $dirmode -p -- $*"
- exec mkdir -m "$dirmode" -p -- "$@"
- fi ;;
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
esac
for file
do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- else
- if test ! -z "$dirmode"; then
- echo "chmod $dirmode $pathcomp"
-
- lasterr=""
- chmod "$dirmode" "$pathcomp" || lasterr=$?
-
- if test ! -z "$lasterr"; then
- errstatus=$lasterr
- fi
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
fi
fi
- fi
+ fi
+ fi
- pathcomp="$pathcomp/"
- done
+ pathcomp=$pathcomp/
+ done
done
exit $errstatus
# Local Variables:
# mode: shell-script
-# sh-indentation: 3
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
# End:
-# mkinstalldirs ends here
projects / awesomized / libmemcached / commitdiff
