- /**
- * Definition of the legal "magic" values used in a packet.
- * See section 3.1 Magic byte
- */
- typedef enum {
- PROTOCOL_BINARY_REQ = 0x80,
- PROTOCOL_BINARY_RES = 0x81
- } protocol_binary_magic;
-
- /**
- * Definition of the valid response status numbers.
- * See section 3.2 Response Status
- */
- typedef enum {
- PROTOCOL_BINARY_RESPONSE_SUCCESS = 0x00,
- PROTOCOL_BINARY_RESPONSE_KEY_ENOENT = 0x01,
- PROTOCOL_BINARY_RESPONSE_KEY_EEXISTS = 0x02,
- PROTOCOL_BINARY_RESPONSE_E2BIG = 0x03,
- PROTOCOL_BINARY_RESPONSE_EINVAL = 0x04,
- PROTOCOL_BINARY_RESPONSE_NOT_STORED = 0x05,
- PROTOCOL_BINARY_RESPONSE_UNKNOWN_COMMAND = 0x81,
- PROTOCOL_BINARY_RESPONSE_ENOMEM = 0x82
- } protocol_binary_response_status;
-
- /**
- * Defintion of the different command opcodes.
- * See section 3.3 Command Opcodes
- */
- typedef enum {
- PROTOCOL_BINARY_CMD_GET = 0x00,
- PROTOCOL_BINARY_CMD_SET = 0x01,
- PROTOCOL_BINARY_CMD_ADD = 0x02,
- PROTOCOL_BINARY_CMD_REPLACE = 0x03,
- PROTOCOL_BINARY_CMD_DELETE = 0x04,
- PROTOCOL_BINARY_CMD_INCREMENT = 0x05,
- PROTOCOL_BINARY_CMD_DECREMENT = 0x06,
- PROTOCOL_BINARY_CMD_QUIT = 0x07,
- PROTOCOL_BINARY_CMD_FLUSH = 0x08,
- PROTOCOL_BINARY_CMD_GETQ = 0x09,
- PROTOCOL_BINARY_CMD_NOOP = 0x0a,
- PROTOCOL_BINARY_CMD_VERSION = 0x0b,
- PROTOCOL_BINARY_CMD_GETK = 0x0c,
- PROTOCOL_BINARY_CMD_GETKQ = 0x0d,
- PROTOCOL_BINARY_CMD_APPEND = 0x0e,
- PROTOCOL_BINARY_CMD_PREPEND = 0x0f,
- PROTOCOL_BINARY_CMD_STAT = 0x10,
- PROTOCOL_BINARY_CMD_SETQ = 0x11,
- PROTOCOL_BINARY_CMD_ADDQ = 0x12,
- PROTOCOL_BINARY_CMD_REPLACEQ = 0x13,
- PROTOCOL_BINARY_CMD_DELETEQ = 0x14,
- PROTOCOL_BINARY_CMD_INCREMENTQ = 0x15,
- PROTOCOL_BINARY_CMD_DECREMENTQ = 0x16,
- PROTOCOL_BINARY_CMD_QUITQ = 0x17,
- PROTOCOL_BINARY_CMD_FLUSHQ = 0x18,
- PROTOCOL_BINARY_CMD_APPENDQ = 0x19,
- PROTOCOL_BINARY_CMD_PREPENDQ = 0x1a
- } protocol_binary_command;
-
- /**
- * Definition of the data types in the packet
- * See section 3.4 Data Types
- */
- typedef enum {
- PROTOCOL_BINARY_RAW_BYTES = 0x00
- } protocol_binary_datatypes;
-
- /**
- * Definition of the header structure for a request packet.
- * See section 2
- */
- typedef union {
- struct {
- uint8_t magic;
- uint8_t opcode;
- uint16_t keylen;
- uint8_t extlen;
- uint8_t datatype;
- uint16_t reserved;
- uint32_t bodylen;
- uint32_t opaque;
- uint64_t cas;
- } request;
- uint8_t bytes[24];
- } protocol_binary_request_header;
-
- /**
- * Definition of the header structure for a response packet.
- * See section 2
- */
- typedef union {
- struct {
- uint8_t magic;
- uint8_t opcode;
- uint16_t keylen;
- uint8_t extlen;
- uint8_t datatype;
- uint16_t status;
- uint32_t bodylen;
- uint32_t opaque;
- uint64_t cas;
- } response;
- uint8_t bytes[24];
- } protocol_binary_response_header;
-
- /**
- * Definition of a request-packet containing no extras
- */
- typedef union {
- struct {
- protocol_binary_request_header header;
- } message;
- uint8_t bytes[sizeof(protocol_binary_request_header)];
- } protocol_binary_request_no_extras;
-
- /**
- * Definition of a response-packet containing no extras
- */
- typedef union {
- struct {
- protocol_binary_response_header header;
- } message;
- uint8_t bytes[sizeof(protocol_binary_response_header)];
- } protocol_binary_response_no_extras;
-
- /**
- * Definition of the packet used by the get, getq, getk and getkq command.
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_get;
- typedef protocol_binary_request_no_extras protocol_binary_request_getq;
- typedef protocol_binary_request_no_extras protocol_binary_request_getk;
- typedef protocol_binary_request_no_extras protocol_binary_request_getkq;
-
- /**
- * Definition of the packet returned from a successful get, getq, getk and
- * getkq.
- * See section 4
- */
- typedef union {
- struct {
- protocol_binary_response_header header;
- struct {
- uint32_t flags;
- } body;
- } message;
- uint8_t bytes[sizeof(protocol_binary_response_header) + 4];
- } protocol_binary_response_get;
-
- typedef protocol_binary_response_get protocol_binary_response_getq;
- typedef protocol_binary_response_get protocol_binary_response_getk;
- typedef protocol_binary_response_get protocol_binary_response_getkq;
-
- /**
- * Definition of the packet used by the delete command
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_delete;
-
- /**
- * Definition of the packet returned by the delete command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_delete;
-
- /**
- * Definition of the packet used by the flush command
- * See section 4
- * Please note that the expiration field is optional, so remember to see
- * check the header.bodysize to see if it is present.
- */
- typedef union {
- struct {
- protocol_binary_request_header header;
- struct {
- uint32_t expiration;
- } body;
- } message;
- uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
- } protocol_binary_request_flush;
-
- /**
- * Definition of the packet returned by the flush command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_flush;
-
- /**
- * Definition of the packet used by set, add and replace
- * See section 4
- */
- typedef union {
- struct {
- protocol_binary_request_header header;
- struct {
- uint32_t flags;
- uint32_t expiration;
- } body;
- } message;
- uint8_t bytes[sizeof(protocol_binary_request_header) + 8];
- } protocol_binary_request_set;
- typedef protocol_binary_request_set protocol_binary_request_add;
- typedef protocol_binary_request_set protocol_binary_request_replace;
-
- /**
- * Definition of the packet returned by set, add and replace
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_set;
- typedef protocol_binary_response_no_extras protocol_binary_response_add;
- typedef protocol_binary_response_no_extras protocol_binary_response_replace;
-
- /**
- * Definition of the noop packet
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_noop;
-
- /**
- * Definition of the packet returned by the noop command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_noop;
-
- /**
- * Definition of the structure used by the increment and decrement
- * command.
- * See section 4
- */
- typedef union {
- struct {
- protocol_binary_request_header header;
- struct {
- uint64_t delta;
- uint64_t initial;
- uint32_t expiration;
- } body;
- } message;
- uint8_t bytes[sizeof(protocol_binary_request_header) + 20];
- } protocol_binary_request_incr;
- typedef protocol_binary_request_incr protocol_binary_request_decr;
-
- /**
- * Definition of the response from an incr or decr command
- * command.
- * See section 4
- */
- typedef union {
- struct {
- protocol_binary_response_header header;
- struct {
- uint64_t value;
- } body;
- } message;
- uint8_t bytes[sizeof(protocol_binary_response_header) + 8];
- } protocol_binary_response_incr;
- typedef protocol_binary_response_incr protocol_binary_response_decr;
-
- /**
- * Definition of the quit
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_quit;
-
- /**
- * Definition of the packet returned by the quit command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_quit;
-
- /**
- * Definition of the packet used by append and prepend command
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_append;
- typedef protocol_binary_request_no_extras protocol_binary_request_prepend;
-
- /**
- * Definition of the packet returned from a successful append or prepend
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_append;
- typedef protocol_binary_response_no_extras protocol_binary_response_prepend;
-
- /**
- * Definition of the packet used by the version command
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_version;
-
- /**
- * Definition of the packet returned from a successful version command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_version;
-
-
- /**
- * Definition of the packet used by the stats command.
- * See section 4
- */
- typedef protocol_binary_request_no_extras protocol_binary_request_stats;
-
- /**
- * Definition of the packet returned from a successful stats command
- * See section 4
- */
- typedef protocol_binary_response_no_extras protocol_binary_response_stats;
+/**
+ * Definition of the legal "magic" values used in a packet.
+ * See section 3.1 Magic byte
+ */
+typedef enum
+{
+ PROTOCOL_BINARY_REQ= 0x80,
+ PROTOCOL_BINARY_RES= 0x81
+} protocol_binary_magic;
+
+/**
+ * Definition of the valid response status numbers.
+ * See section 3.2 Response Status
+ */
+typedef enum
+{
+ PROTOCOL_BINARY_RESPONSE_SUCCESS= 0x00,
+ PROTOCOL_BINARY_RESPONSE_KEY_ENOENT= 0x01,
+ PROTOCOL_BINARY_RESPONSE_KEY_EEXISTS= 0x02,
+ PROTOCOL_BINARY_RESPONSE_E2BIG= 0x03,
+ PROTOCOL_BINARY_RESPONSE_EINVAL= 0x04,
+ PROTOCOL_BINARY_RESPONSE_NOT_STORED= 0x05,
+ PROTOCOL_BINARY_RESPONSE_UNKNOWN_COMMAND= 0x81,
+ PROTOCOL_BINARY_RESPONSE_ENOMEM= 0x82
+} protocol_binary_response_status;
+
+/**
+ * Defintion of the different command opcodes.
+ * See section 3.3 Command Opcodes
+ */
+typedef enum
+{
+ PROTOCOL_BINARY_CMD_GET= 0x00,
+ PROTOCOL_BINARY_CMD_SET= 0x01,
+ PROTOCOL_BINARY_CMD_ADD= 0x02,
+ PROTOCOL_BINARY_CMD_REPLACE= 0x03,
+ PROTOCOL_BINARY_CMD_DELETE= 0x04,
+ PROTOCOL_BINARY_CMD_INCREMENT= 0x05,
+ PROTOCOL_BINARY_CMD_DECREMENT= 0x06,
+ PROTOCOL_BINARY_CMD_QUIT= 0x07,
+ PROTOCOL_BINARY_CMD_FLUSH= 0x08,
+ PROTOCOL_BINARY_CMD_GETQ= 0x09,
+ PROTOCOL_BINARY_CMD_NOOP= 0x0a,
+ PROTOCOL_BINARY_CMD_VERSION= 0x0b,
+ PROTOCOL_BINARY_CMD_GETK= 0x0c,
+ PROTOCOL_BINARY_CMD_GETKQ= 0x0d,
+ PROTOCOL_BINARY_CMD_APPEND= 0x0e,
+ PROTOCOL_BINARY_CMD_PREPEND= 0x0f,
+ PROTOCOL_BINARY_CMD_STAT= 0x10,
+ PROTOCOL_BINARY_CMD_SETQ= 0x11,
+ PROTOCOL_BINARY_CMD_ADDQ= 0x12,
+ PROTOCOL_BINARY_CMD_REPLACEQ= 0x13,
+ PROTOCOL_BINARY_CMD_DELETEQ= 0x14,
+ PROTOCOL_BINARY_CMD_INCREMENTQ= 0x15,
+ PROTOCOL_BINARY_CMD_DECREMENTQ= 0x16,
+ PROTOCOL_BINARY_CMD_QUITQ= 0x17,
+ PROTOCOL_BINARY_CMD_FLUSHQ= 0x18,
+ PROTOCOL_BINARY_CMD_APPENDQ= 0x19,
+ PROTOCOL_BINARY_CMD_PREPENDQ= 0x1a
+} protocol_binary_command;
+
+/**
+ * Definition of the data types in the packet
+ * See section 3.4 Data Types
+ */
+typedef enum
+{
+ PROTOCOL_BINARY_RAW_BYTES= 0x00
+} protocol_binary_datatypes;
+
+/**
+ * Definition of the header structure for a request packet.
+ * See section 2
+ */
+typedef union
+{
+ struct
+ {
+ uint8_t magic;
+ uint8_t opcode;
+ uint16_t keylen;
+ uint8_t extlen;
+ uint8_t datatype;
+ uint16_t reserved;
+ uint32_t bodylen;
+ uint32_t opaque;
+ uint64_t cas;
+ } request;
+ uint8_t bytes[24];
+} protocol_binary_request_header;
+
+/**
+ * Definition of the header structure for a response packet.
+ * See section 2
+ */
+typedef union
+{
+ struct
+ {
+ uint8_t magic;
+ uint8_t opcode;
+ uint16_t keylen;
+ uint8_t extlen;
+ uint8_t datatype;
+ uint16_t status;
+ uint32_t bodylen;
+ uint32_t opaque;
+ uint64_t cas;
+ } response;
+ uint8_t bytes[24];
+} protocol_binary_response_header;
+
+/**
+ * Definition of a request-packet containing no extras
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_request_header header;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_request_header)];
+} protocol_binary_request_no_extras;
+
+/**
+ * Definition of a response-packet containing no extras
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_response_header header;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_response_header)];
+} protocol_binary_response_no_extras;
+
+/**
+ * Definition of the packet used by the get, getq, getk and getkq command.
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_get;
+typedef protocol_binary_request_no_extras protocol_binary_request_getq;
+typedef protocol_binary_request_no_extras protocol_binary_request_getk;
+typedef protocol_binary_request_no_extras protocol_binary_request_getkq;
+
+/**
+ * Definition of the packet returned from a successful get, getq, getk and
+ * getkq.
+ * See section 4
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_response_header header;
+ struct
+ {
+ uint32_t flags;
+ } body;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_response_header) + 4];
+} protocol_binary_response_get;
+
+typedef protocol_binary_response_get protocol_binary_response_getq;
+typedef protocol_binary_response_get protocol_binary_response_getk;
+typedef protocol_binary_response_get protocol_binary_response_getkq;
+
+/**
+ * Definition of the packet used by the delete command
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_delete;
+
+/**
+ * Definition of the packet returned by the delete command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras
+protocol_binary_response_delete;
+
+/**
+ * Definition of the packet used by the flush command
+ * See section 4
+ * Please note that the expiration field is optional, so remember to see
+ * check the header.bodysize to see if it is present.
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_request_header header;
+ struct
+ {
+ uint32_t expiration;
+ } body;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_request_header) + 4];
+} protocol_binary_request_flush;
+
+/**
+ * Definition of the packet returned by the flush command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras protocol_binary_response_flush;
+
+/**
+ * Definition of the packet used by set, add and replace
+ * See section 4
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_request_header header;
+ struct
+ {
+ uint32_t flags;
+ uint32_t expiration;
+ } body;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_request_header) + 8];
+} protocol_binary_request_set;
+typedef protocol_binary_request_set protocol_binary_request_add;
+typedef protocol_binary_request_set
+protocol_binary_request_replace;
+
+/**
+ * Definition of the packet returned by set, add and replace
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras protocol_binary_response_set;
+typedef protocol_binary_response_no_extras protocol_binary_response_add;
+typedef protocol_binary_response_no_extras
+protocol_binary_response_replace;
+
+/**
+ * Definition of the noop packet
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_noop;
+
+/**
+ * Definition of the packet returned by the noop command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras protocol_binary_response_noop;
+
+/**
+ * Definition of the structure used by the increment and decrement
+ * command.
+ * See section 4
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_request_header header;
+ struct
+ {
+ uint64_t delta;
+ uint64_t initial;
+ uint32_t expiration;
+ } body;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_request_header) + 20];
+} protocol_binary_request_incr;
+typedef protocol_binary_request_incr protocol_binary_request_decr;
+
+/**
+ * Definition of the response from an incr or decr command
+ * command.
+ * See section 4
+ */
+typedef union
+{
+ struct
+ {
+ protocol_binary_response_header header;
+ struct
+ {
+ uint64_t value;
+ } body;
+ } message;
+ uint8_t bytes[sizeof(protocol_binary_response_header) + 8];
+} protocol_binary_response_incr;
+typedef protocol_binary_response_incr protocol_binary_response_decr;
+
+/**
+ * Definition of the quit
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_quit;
+
+/**
+ * Definition of the packet returned by the quit command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras protocol_binary_response_quit;
+
+/**
+ * Definition of the packet used by append and prepend command
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_append;
+typedef protocol_binary_request_no_extras
+protocol_binary_request_prepend;
+
+/**
+ * Definition of the packet returned from a successful append or prepend
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras
+protocol_binary_response_append;
+typedef protocol_binary_response_no_extras
+protocol_binary_response_prepend;
+
+/**
+ * Definition of the packet used by the version command
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras
+protocol_binary_request_version;
+
+/**
+ * Definition of the packet returned from a successful version command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras
+protocol_binary_response_version;
+
+
+/**
+ * Definition of the packet used by the stats command.
+ * See section 4
+ */
+typedef protocol_binary_request_no_extras protocol_binary_request_stats;
+
+/**
+ * Definition of the packet returned from a successful stats command
+ * See section 4
+ */
+typedef protocol_binary_response_no_extras protocol_binary_response_stats;