3 # Copyright (C) 2012-2013 Brian Aker
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions are
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
13 # * Redistributions in binary form must reproduce the above
14 # copyright notice, this list of conditions and the following disclaimer
15 # in the documentation and/or other materials provided with the
18 # * The names of its contributors may not be used to endorse or
19 # promote products derived from this software without specific prior
22 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 # Environment Variables that will influence the build:
46 command_not_found_handle
()
48 warn
"$@: command not found"
54 while caller
$frame; do
65 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
70 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
76 echo "$BASH_SOURCE:$BASH_LINENO: $@"
77 #echo "$BASH_SOURCE:$BASH_LINENO: $@" >&1
82 local param_name
=\$
"$1"
83 local param_value
=`eval "expr \"$param_name\" "`
85 if [ -n "$param_value" ]; then
86 echo "$bash_source:$bash_lineno: assert($param_name) had value of "$param_value"" >&2
93 local param_name
=\$
"$1"
94 local param_value
=`eval "expr \"$param_name\" "`
96 if [ -z "$param_value" ]; then
97 echo "$bash_source:$bash_lineno: assert($param_name)" >&2
102 function assert_file
()
104 if [ ! -f "$1" ]; then
105 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
110 function assert_no_file
()
113 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) file exists: $2" >&2
118 function assert_no_directory
()
121 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) directory exists: $2" >&2
126 function assert_exec_file
()
128 if [ ! -f "$1" ]; then
129 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
133 if [ ! -x "$1" ]; then
134 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) exists but is not executable: $2" >&2
139 function command_exists
()
141 type "$1" &> /dev
/null
;
144 function rebuild_host_os
()
146 HOST_OS
="${UNAME_MACHINE_ARCH}-${VENDOR}-${VENDOR_DISTRIBUTION}-${VENDOR_RELEASE}-${UNAME_KERNEL}-${UNAME_KERNEL_RELEASE}"
149 echo "HOST_OS=$HOST_OS"
154 # Validate the distribution name, or toss an erro
155 # values: darwin,fedora,rhel,ubuntu,debian,opensuse
156 function set_VENDOR_DISTRIBUTION
()
158 local dist
=`echo "$1" | tr '[A-Z]' '[a-z]'`
161 VENDOR_DISTRIBUTION
='darwin'
164 VENDOR_DISTRIBUTION
='fedora'
167 VENDOR_DISTRIBUTION
='rhel'
170 VENDOR_DISTRIBUTION
='debian'
173 VENDOR_DISTRIBUTION
='ubuntu'
176 VENDOR_DISTRIBUTION
='opensuse'
179 VENDOR_DISTRIBUTION
='opensuse'
182 die
"attempt to set an invalid VENDOR_DISTRIBUTION=$dist"
187 # Validate a Vendor's release name/number
188 function set_VENDOR_RELEASE
()
190 local release
=`echo "$1" | tr '[A-Z]' '[a-z]'`
191 case "$VENDOR_DISTRIBUTION" in
193 case "$VENDOR_DISTRIBUTION" in
195 VENDOR_RELEASE
='snow_leopard'
198 VENDOR_RELEASE
='mountain'
201 VENDOR_RELEASE
='mountain'
204 VENDOR_RELEASE
='mountain_lion'
207 VENDOR_RELEASE
='unknown'
212 VENDOR_RELEASE
="$release"
213 if [[ "x$VENDOR_RELEASE" == '18' ]]; then
214 VENDOR_RELEASE
='sphericalcow'
218 VENDOR_RELEASE
="$release"
221 VENDOR_RELEASE
="$release"
222 if [[ "x$VENDOR_RELEASE" == 'x12.04' ]]; then
223 VENDOR_RELEASE
="precise"
224 elif [[ "x$VENDOR_RELEASE" == 'x12.10' ]]; then
225 VENDOR_RELEASE
="quantal"
229 VENDOR_RELEASE
="$release"
232 die
"attempt to set VENDOR_RELEASE without setting VENDOR_DISTRIBUTION"
235 die
"attempt to set with an invalid VENDOR_DISTRIBUTION=$VENDOR_DISTRIBUTION"
241 # Valid values are: apple, redhat, centos, canonical, oracle, suse
242 function set_VENDOR
()
244 local vendor
=`echo "$1" | tr '[A-Z]' '[a-z]'`
256 redhat-release-server-
*)
259 enterprise-release-
*)
281 die
"An attempt was made to set an invalid VENDOR=$_vendor"
285 set_VENDOR_DISTRIBUTION
$2
286 set_VENDOR_RELEASE
$3
288 # Set which vendor/versions we trust for autoreconf
289 case $VENDOR_DISTRIBUTION in
291 if [[ "x$VENDOR_RELEASE" == 'x18' ]]; then
292 AUTORECONF_REBUILD_HOST
=true
293 elif [[ "x$VENDOR_RELEASE" == 'xsphericalcow' ]]; then
294 AUTORECONF_REBUILD_HOST
=true
295 elif [[ "x$VENDOR_RELEASE" == 'x19' ]]; then
296 AUTORECONF_REBUILD_HOST
=true
300 if [[ "x$VENDOR_RELEASE" == 'xprecise' ]]; then
301 AUTORECONF_REBUILD_HOST
=true
302 elif [[ "x$VENDOR_RELEASE" == 'xquantal' ]]; then
303 AUTORECONF_REBUILD_HOST
=true
310 function determine_target_platform
()
312 UNAME_MACHINE_ARCH
=`(uname -m) 2>/dev/null` || UNAME_MACHINE_ARCH
=unknown
313 UNAME_KERNEL
=`(uname -s) 2>/dev/null` || UNAME_SYSTEM
=unknown
314 UNAME_KERNEL_RELEASE
=`(uname -r) 2>/dev/null` || UNAME_KERNEL_RELEASE
=unknown
316 if [[ -x '/usr/bin/sw_vers' ]]; then
317 local _VERSION
=`/usr/bin/sw_vers -productVersion`
318 set_VENDOR
'apple' 'darwin' $_VERSION
319 elif [[ $
(uname
) == 'Darwin' ]]; then
320 set_VENDOR
'apple' 'darwin' 'mountain'
321 elif [[ -f '/etc/fedora-release' ]]; then
322 local fedora_version
=`cat /etc/fedora-release | awk ' { print $3 } '`
323 set_VENDOR
'redhat' 'fedora' $fedora_version
324 elif [[ -f '/etc/centos-release' ]]; then
325 local centos_version
=`cat /etc/centos-release | awk ' { print $7 } '`
326 set_VENDOR
'centos' 'rhel' $centos_version
327 elif [[ -f '/etc/SuSE-release' ]]; then
328 local suse_distribution
=`head -1 /etc/SuSE-release | awk ' { print $1 } '`
329 local suse_version
=`head -1 /etc/SuSE-release | awk ' { print $2 } '`
330 set_VENDOR
'suse' $suse_distribution $suse_version
331 elif [[ -f '/etc/redhat-release' ]]; then
332 local rhel_version
=`cat /etc/redhat-release | awk ' { print $7 } '`
333 local _vendor
=`rpm -qf /etc/redhat-release`
334 set_VENDOR
$_vendor 'rhel' $rhel_version
335 elif [[ -f '/etc/os-release' ]]; then
336 source '/etc/os-release'
337 set_VENDOR
$ID $ID $VERSION_ID
338 elif [[ -x '/usr/bin/lsb_release' ]]; then
339 local _ID
=`/usr/bin/lsb_release -s -i`
340 local _VERSION
=`/usr/bin/lsb_release -s -r`
341 set_VENDOR
$_ID $_ID $_VERSION_ID
342 elif [[ -f '/etc/lsb-release' ]]; then
343 source '/etc/lsb-release'
344 set_VENDOR
'canonical' $DISTRIB_ID $DISTRIB_CODENAME
350 function run_configure
()
352 # We will run autoreconf if we are required
353 run_autoreconf_if_required
355 # We always begin at the root of our build
357 die
"Programmer error, we entered run_configure with a stacked directory"
360 if ! command_exists
"$CONFIGURE"; then
361 die
"$CONFIGURE does not exist"
365 if [[ -n "$BUILD_DIR" ]]; then
368 safe_pushd
$BUILD_DIR
371 # Arguments for configure
372 local BUILD_CONFIGURE_ARG
=
374 # If ENV DEBUG is set we enable both debug and asssert, otherwise we see if this is a VCS checkout and if so enable assert
375 # Set ENV ASSERT in order to enable assert
377 BUILD_CONFIGURE_ARG
+=' --enable-debug --enable-assert'
378 elif [[ -n "$VCS_CHECKOUT" ]]; then
379 BUILD_CONFIGURE_ARG
+=' --enable-assert'
382 if [[ -n "$CONFIGURE_ARG" ]]; then
383 BUILD_CONFIGURE_ARG
+=" $CONFIGURE_ARG"
386 if [[ -n "$PREFIX_ARG" ]]; then
387 BUILD_CONFIGURE_ARG
+=" $PREFIX_ARG"
391 # If we are executing on OSX use CLANG, otherwise only use it if we find it in the ENV
394 CC
=clang CXX
=clang
++ $top_srcdir/configure
$BUILD_CONFIGURE_ARG || die
"Cannot execute CC=clang CXX=clang++ configure $BUILD_CONFIGURE_ARG"
398 command_exists
'gcc44' || die
"Could not locate gcc44"
399 CC
=gcc44 CXX
=gcc44
$top_srcdir/configure
$BUILD_CONFIGURE_ARG || die
"Cannot execute CC=gcc44 CXX=gcc44 configure $BUILD_CONFIGURE_ARG"
403 $CONFIGURE $BUILD_CONFIGURE_ARG
408 if [ $ret -ne 0 ]; then
409 die
"Could not execute $CONFIGURE $BUILD_CONFIGURE_ARG"
412 if [ ! -f 'Makefile' ]; then
413 die
"Programmer error, configure was run but no Makefile existed after $CONFIGURE was run"
417 function setup_gdb_command
() {
418 GDB_TMPFILE
=$
(mktemp
/tmp
/gdb.XXXXXXXXXX
)
419 echo 'set logging overwrite on' > $GDB_TMPFILE
420 echo 'set logging on' >> $GDB_TMPFILE
421 echo 'set environment LIBTEST_IN_GDB=1' >> $GDB_TMPFILE
422 echo 'run' >> $GDB_TMPFILE
423 echo 'thread apply all bt' >> $GDB_TMPFILE
424 echo 'quit' >> $GDB_TMPFILE
425 GDB_COMMAND
="gdb -f -batch -x $GDB_TMPFILE"
428 function setup_valgrind_command
() {
429 VALGRIND_PROGRAM
=`type -p valgrind`
430 if [[ -n "$VALGRIND_PROGRAM" ]]; then
431 VALGRIND_COMMAND
="$VALGRIND_PROGRAM --error-exitcode=1 --leak-check=yes --show-reachable=yes --track-fds=yes --malloc-fill=A5 --free-fill=DE"
435 function save_BUILD
()
437 if [[ -n "$OLD_CONFIGURE" ]]; then
438 die
"OLD_CONFIGURE($OLD_CONFIGURE) was set on push, programmer error!"
441 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
442 die
"OLD_CONFIGURE_ARG($OLD_CONFIGURE_ARG) was set on push, programmer error!"
445 if [[ -n "$OLD_PREFIX" ]]; then
446 die
"OLD_PREFIX($OLD_PREFIX) was set on push, programmer error!"
449 if [[ -n "$OLD_MAKE" ]]; then
450 die
"OLD_MAKE($OLD_MAKE) was set on push, programmer error!"
453 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
454 die
"OLD_TESTS_ENVIRONMENT($OLD_TESTS_ENVIRONMENT) was set on push, programmer error!"
457 if [[ -n "$CONFIGURE" ]]; then
458 OLD_CONFIGURE
=$CONFIGURE
461 if [[ -n "$CONFIGURE_ARG" ]]; then
462 OLD_CONFIGURE_ARG
=$CONFIGURE_ARG
465 if [[ -n "$MAKE" ]]; then
469 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
470 OLD_TESTS_ENVIRONMENT
=$TESTS_ENVIRONMENT
474 function restore_BUILD
()
476 if [[ -n "$OLD_CONFIGURE" ]]; then
477 CONFIGURE
=$OLD_CONFIGURE
480 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
481 CONFIGURE_ARG
=$OLD_CONFIGURE_ARG
484 if [[ -n "$OLD_PREFIX" ]]; then
485 PREFIX_ARG
=$OLD_PREFIX
488 if [[ -n "$OLD_MAKE" ]]; then
492 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
493 TESTS_ENVIRONMENT
=$OLD_TESTS_ENVIRONMENT
500 OLD_TESTS_ENVIRONMENT
=
505 function safe_pushd
()
507 pushd $1 &> /dev
/null
;
509 if [ -n "$BUILD_DIR" ]; then
511 echo "BUILD_DIR=$BUILD_DIR"
516 function safe_popd
()
518 local directory_to_delete
=`pwd`
520 if [ $?
-eq 0 ]; then
521 if [[ "$top_srcdir" == "$directory_to_delete" ]]; then
522 die
"We almost deleted top_srcdir($top_srcdir), programmer error"
525 rm -r -f "$directory_to_delete"
529 function make_valgrind
()
531 if [[ "$VENDOR_DISTRIBUTION" == 'darwin' ]]; then
536 # If the env VALGRIND_COMMAND is set then we assume it is valid
537 local valgrind_was_set
=false
538 if [[ -z "$VALGRIND_COMMAND" ]]; then
539 setup_valgrind_command
540 if [[ -n "$VALGRIND_COMMAND" ]]; then
541 valgrind_was_set
=true
544 valgrind_was_set
=true
547 # If valgrind_was_set is set to no we bail
548 if ! $valgrind_was_set; then
549 echo 'valgrind was not present'
555 # If we are required to run configure, do so now
556 run_configure_if_required
558 # If we don't have a configure, then most likely we will be missing libtool
559 assert_file
'configure'
560 if [[ -f 'libtool' ]]; then
561 TESTS_ENVIRONMENT
="./libtool --mode=execute $VALGRIND_COMMAND"
563 TESTS_ENVIRONMENT
="$VALGRIND_COMMAND"
566 make_target
'check' ||
return 1
571 function make_install_system
()
573 local INSTALL_LOCATION
=$
(mktemp
-d /tmp
/XXXXXXXXXX
)
576 PREFIX_ARG
="--prefix=$INSTALL_LOCATION"
578 if [ ! -d $INSTALL_LOCATION ] ; then
579 die
"ASSERT temp directory not found '$INSTALL_LOCATION'"
582 run_configure
#install_buid_dir
584 make_target
'install'
586 make_target
'installcheck'
588 make_target
'uninstall'
590 rm -r -f $INSTALL_LOCATION
593 if [ -f 'Makefile' ]; then
594 die
"ASSERT Makefile should not exist"
601 function make_darwin_malloc
()
603 run_configure_if_required
605 old_MallocGuardEdges
=$MallocGuardEdges
607 old_MallocErrorAbort
=$MallocErrorAbort
609 old_MallocScribble
=$MallocScribble
614 MallocGuardEdges
=$old_MallocGuardEdges
615 MallocErrorAbort
=$old_MallocErrorAbort
616 MallocScribble
=$old_MallocScribble
619 function snapshot_check
()
621 if [ ! -f "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
625 if [ -n "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
626 assert_file
"$BOOTSTRAP_SNAPSHOT_CHECK" 'snapshot check failed'
630 # This will reset our environment, and make sure built files are available.
631 function make_for_snapshot
()
633 # Make sure it is clean
634 make_maintainer_clean
638 make_target
'distclean'
640 # We should have a configure, but no Makefile at the end of this exercise
641 assert_no_file
'Makefile'
642 assert_exec_file
'configure'
647 function check_mingw
()
649 command_exists
'mingw64-configure'
651 if [ "$ret" -ne 0 ]; then
655 command_exists
'mingw64-make'
657 if [ "$ret" -ne 0 ]; then
664 function check_clang
()
666 command_exists
'clang'
668 if [ "$ret" -ne 0 ]; then
675 function check_clang_analyzer
()
677 command_exists
'scan-build'
679 if [ "$ret" -ne 0 ]; then
686 function make_skeleton
()
691 if [ $ret -eq 0 ]; then
692 assert_file
'Makefile'
694 make_target
'all' 'warn'
696 if [ $ret -ne 0 ]; then
699 if [[ -n "$DISPLAY" ]]; then
700 if command_exists
'wine'; then
701 TESTS_ENVIRONMENT
='wine'
705 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
706 make_target
'check' 'warn' || warn
"$MAKE check failed"
711 if $jenkins_build_environment; then
712 make_target
'clean' 'warn'
719 function make_for_mingw
()
721 if ! check_mingw
; then
725 # Make sure it is clean
726 if [ -f Makefile
-o -f configure
]; then
727 make_maintainer_clean
734 CONFIGURE
='mingw64-configure'
736 CONFIGURE_ARGS
='--enable-static --disable-shared'
746 function make_for_clang
()
748 if ! check_clang
; then
752 # Make sure it is clean
753 if [ -f Makefile
-o -f configure
]; then
754 make_maintainer_clean
774 function make_for_clang_analyzer
()
776 if ! check_clang
; then
780 if ! check_clang_analyzer
; then
781 die
'clang-analyzer was not found'
784 # Make sure it is clean
785 if [ -f Makefile
-o -f configure
]; then
786 make_maintainer_clean
795 CONFIGURE_ARGS
='--enable-debug'
800 make_target
'clean' 'warn'
802 scan-build
-o clang-html
make -j4 -k
809 # If we are locally testing, we should make sure the environment is setup correctly
810 function check_for_jenkins
()
812 if ! $jenkins_build_environment; then
813 echo "Not inside of jenkins"
815 if [ -f 'configure' ]; then
816 make_maintainer_clean
819 if $BOOTSTRAP_SNAPSHOT; then
825 function make_universe
()
832 make_for_clang_analyzer
834 if [ check_mingw
-eq 0 ]; then
842 function make_for_continuus_integration
()
844 # Setup the environment if we are local
847 # No matter then evironment, we should not have a Makefile at this point
848 assert_no_file
'Makefile'
850 # Platforms which require bootstrap should have some setup done before we hit this stage.
851 # If we are building locally, skip this step, unless we are just testing locally.
852 if $BOOTSTRAP_SNAPSHOT; then
855 # If we didn't require a snapshot, then we should not have a configure
856 assert_no_file
'configure'
861 assert_no_file
'Makefile' 'Programmer error, Makefile existed where build state should have been clean'
867 assert_exec_file
'configure'
868 assert_file
'Makefile'
872 # make rpm includes "make distcheck"
873 if [[ -f rpm.am
]]; then
875 elif [[ -d rpm
]]; then
881 assert_exec_file
'configure'
882 assert_file
'Makefile'
889 assert_exec_file
'configure'
890 assert_file
'Makefile'
896 assert_exec_file
'configure'
897 assert_file
'Makefile'
901 assert_exec_file
'configure'
902 assert_file
'Makefile'
911 make_maintainer_clean
916 # The point to this test is to test bootstrap.sh itself
917 function self_test
()
919 # We start off with a clean env
920 make_maintainer_clean
922 eval "./bootstrap.sh jenkins" || die
"failed 'jenkins'"
923 eval "./bootstrap.sh all" || die
"failed 'all'"
924 eval "./bootstrap.sh gdb" || die
"failed 'gdb'"
925 eval "./bootstrap.sh maintainer-clean" || die
"failed 'maintainer-clean'"
928 function make_install_html
()
930 run_configure_if_required
931 assert_file
'configure'
933 make_target
'install-html'
940 if command_exists
'gdb'; then
941 run_configure_if_required
943 # Set ENV GDB_COMMAND
944 if [[ -z "$GDB_COMMAND" ]]; then
948 # If we don't have a configure, then most likely we will be missing libtool
949 assert_file
'configure'
950 if [[ -f 'libtool' ]]; then
951 TESTS_ENVIRONMENT
="./libtool --mode=execute $GDB_COMMAND"
953 TESTS_ENVIRONMENT
="$GDB_COMMAND"
958 if [ -f 'gdb.txt' ]; then
962 if [ -f '.gdb_history' ]; then
966 if $jenkins_build_environment; then
970 echo 'gdb was not present'
977 # $1 target to compile
978 # $2 to die, or not to die, based on contents
979 function make_target
()
982 die
"Programmer error, no target provided for make"
985 if [ ! -f 'Makefile' ]; then
986 die
"Programmer error, make was called before configure"
990 if [ -n "$TESTS_ENVIRONMENT" ]; then
992 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
996 if [ -z "$MAKE" ]; then
997 die
"MAKE was not set"
1000 # $2 represents error or warn
1004 if [ $ret -ne 0 ]; then
1005 if [ -n "$2" ]; then
1006 warn
"Failed to execute $MAKE $1: $ret"
1008 die
"Failed to execute $MAKE $1: $ret"
1015 function make_distcheck
()
1017 make_target
'distcheck'
1020 function make_rpm
()
1022 if command_exists
'rpmbuild'; then
1023 if [ -f 'rpm.am' -o -d 'rpm' ]; then
1024 run_configure_if_required
1027 if $jenkins_build_environment; then
1035 function make_maintainer_clean
()
1037 run_configure_if_required
1038 make_target
'maintainer-clean' 'no_error'
1040 # Lets make sure we really cleaned up the environment
1041 assert_no_file
'Makefile'
1042 assert_no_file
'configure'
1043 assert_no_directory
'autom4te.cache'
1046 function make_check
()
1051 function make_jenkins_default
()
1057 function make_default
()
1059 run_configure_if_required
1063 function run_configure_if_required
()
1065 run_autoreconf_if_required
1067 if [ ! -f 'Makefile' ]; then
1071 assert_file
'Makefile' 'configure did not produce a Makefile'
1074 function run_autoreconf_if_required
()
1076 if [ ! -x 'configure' ]; then
1080 assert_exec_file
'configure'
1084 function run_autoreconf
()
1086 if [[ -z "$AUTORECONF" ]]; then
1087 die
"Programmer error, tried to call run_autoreconf () but AUTORECONF was not set"
1090 if test $use_libtool = 1; then
1091 assert
$BOOTSTRAP_LIBTOOLIZE
1092 run
$BOOTSTRAP_LIBTOOLIZE '--copy' '--install' '--force' || die
"Cannot execute $BOOTSTRAP_LIBTOOLIZE"
1095 run
$AUTORECONF || die
"Cannot execute $AUTORECONF"
1097 eval 'bash -n configure' || die
"autoreconf generated a malformed configure"
1106 if [ -z "$1" ]; then
1113 function parse_command_line_options
()
1115 local SHORTOPTS
=':apcmt:dvh'
1119 while getopts "$SHORTOPTS" opt
; do
1122 AUTORECONF_OPTION
=true
1123 MAKE_TARGET
='autoreconf'
1126 PRINT_SETUP_OPTION
=true
1129 CONFIGURE_OPTION
=true
1130 MAKE_TARGET
='configure'
1132 m
) # maintainer-clean
1134 MAKE_TARGET
='clean_op'
1138 TARGET_OPTION_ARG
="$OPTARG"
1139 MAKE_TARGET
="$OPTARG"
1146 echo "bootstrap.sh [options] optional_target ..."
1147 echo " -a # Just run autoreconf";
1148 echo " -p # Print ENV";
1149 echo " -c # Just run configure";
1150 echo " -m # Just run maintainer-clean";
1151 echo " -t # Make target";
1152 echo " -d # Enable debug";
1153 echo " -h # Show help";
1154 echo " -v # Be more verbose in output";
1162 echo "Option -$OPTARG requires an argument." >&2
1166 echo "$0: error - unrecognized option $1" 1>&2
1174 if [ -n "$1" ]; then
1179 function determine_vcs
()
1181 if [[ -d '.git' ]]; then
1183 elif [[ -d '.bzr' ]]; then
1185 elif [[ -d '.svn' ]]; then
1187 elif [[ -d '.hg' ]]; then
1193 if [[ -n "$VCS_CHECKOUT" ]]; then
1198 function require_libtoolise
()
1201 grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac
>/dev
/null \
1203 grep '^[ ]*LT_INIT' configure.ac
>/dev
/null \
1207 function autoreconf_setup
()
1209 # Set ENV MAKE in order to override "make"
1210 if [[ -z "$MAKE" ]]; then
1211 if command_exists
'gmake'; then
1212 MAKE
=`type -p gmake`
1214 if command_exists
'make'; then
1219 if [ "$VCS_CHECKOUT" ]; then
1221 MAKE
="$MAKE --warn-undefined-variables"
1230 if [[ -z "$GNU_BUILD_FLAGS" ]]; then
1231 GNU_BUILD_FLAGS
="--install --force"
1235 GNU_BUILD_FLAGS
="$GNU_BUILD_FLAGS --verbose"
1238 if [ -z "$ACLOCAL_PATH" ]; then
1239 ACLOCAL_PATH
="/usr/local/share/aclocal $ACLOCAL_PATH"
1242 if [[ -z "$WARNINGS" ]]; then
1243 if [[ -n "$VCS_CHECKOUT" ]]; then
1244 WARNINGS
="all,error"
1250 if test $use_libtool = 1; then
1251 if [[ -n "$LIBTOOLIZE" ]]; then
1252 BOOTSTRAP_LIBTOOLIZE
=`type -p $LIBTOOLIZE`
1254 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1255 echo "Couldn't find user supplied libtoolize, it is required"
1259 # If we are using OSX, we first check to see glibtoolize is available
1260 if [[ "$VENDOR_DISTRIBUTION" == "darwin" ]]; then
1261 BOOTSTRAP_LIBTOOLIZE
=`type -p glibtoolize`
1263 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1264 echo "Couldn't find glibtoolize, it is required on OSX"
1268 BOOTSTRAP_LIBTOOLIZE
=`type -p libtoolize`
1270 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1271 echo "Couldn't find libtoolize, it is required"
1277 LIBTOOLIZE_OPTIONS
="--verbose $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1280 LIBTOOLIZE_OPTIONS
="--debug $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1285 # Test the ENV AUTOMAKE if it exists
1286 if [[ -n "$AUTOMAKE" ]]; then
1287 run
$AUTOMAKE '--help' &> /dev
/null || die
"Failed to run AUTOMAKE:$AUTOMAKE"
1290 # Test the ENV AUTOCONF if it exists
1291 if [[ -n "$AUTOCONF" ]]; then
1292 run
$AUTOCONF '--help' &> /dev
/null || die
"Failed to run AUTOCONF:$AUTOCONF"
1295 # Test the ENV AUTOHEADER if it exists
1296 if [[ -n "$AUTOHEADER" ]]; then
1297 run
$AUTOHEADER '--help' &> /dev
/null || die
"Failed to run AUTOHEADER:$AUTOHEADER"
1300 # Test the ENV AUTOM4TE if it exists
1301 if [[ -n "$AUTOM4TE" ]]; then
1302 run
$AUTOM4TE '--help' &> /dev
/null || die
"Failed to run AUTOM4TE:$AUTOM4TE"
1305 # Test the ENV AUTOHEADER if it exists, if not we add one and add --install
1306 if [[ -z "$ACLOCAL" ]]; then
1307 ACLOCAL
="aclocal --install"
1309 run
$ACLOCAL '--help' &> /dev
/null || die
"Failed to run ACLOCAL:$ACLOCAL"
1311 if [[ -z "$AUTORECONF" ]]; then
1312 AUTORECONF
=`type -p autoreconf`
1314 if [[ -z "$AUTORECONF" ]]; then
1315 die
"Couldn't find autoreconf"
1318 if [[ -n "$GNU_BUILD_FLAGS" ]]; then
1319 AUTORECONF
="$AUTORECONF $GNU_BUILD_FLAGS"
1323 run
$AUTORECONF '--help' &> /dev
/null || die
"Failed to run AUTORECONF:$AUTORECONF"
1326 function print_setup
()
1328 saved_debug_status
=$DEBUG
1333 echo '----------------------------------------------'
1334 echo 'BOOTSTRAP ENV'
1335 echo "AUTORECONF=$AUTORECONF"
1336 echo "HOST_OS=$HOST_OS"
1337 echo "VENDOR=$VENDOR"
1338 echo "VENDOR_DISTRIBUTION=$VENDOR_DISTRIBUTION"
1339 echo "VENDOR_RELEASE=$VENDOR_RELEASE"
1342 if $AUTORECONF_OPTION; then
1346 if $CLEAN_OPTION; then
1350 if $CONFIGURE_OPTION; then
1354 if $DEBUG_OPTION; then
1358 if $PRINT_SETUP_OPTION; then
1362 if $TARGET_OPTION; then
1363 echo "--target=$TARGET_OPTION_ARG"
1366 if $VERBOSE_OPTION; then
1370 if [[ -n "$MAKE" ]]; then
1374 if [[ -n "$MAKE_TARGET" ]]; then
1375 echo "MAKE_TARGET=$MAKE_TARGET"
1378 if [[ -n "$PREFIX" ]]; then
1379 echo "PREFIX=$PREFIX"
1382 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
1383 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
1386 if [[ -n "$VCS_CHECKOUT" ]]; then
1387 echo "VCS_CHECKOUT=$VCS_CHECKOUT"
1398 if [[ -n "$WARNINGS" ]]; then
1399 echo "WARNINGS=$WARNINGS"
1401 echo '----------------------------------------------'
1403 if $saved_debug_status; then
1408 function make_clean_option
()
1410 run_configure_if_required
1412 make_maintainer_clean
1414 if [[ "$VCS_CHECKOUT" == 'git' ]]; then
1415 run
"$VCS_CHECKOUT" status
--ignored
1416 elif [[ -n "$VCS_CHECKOUT" ]]; then
1417 run
"$VCS_CHECKOUT" status
1421 function make_for_autoreconf
()
1423 if [ -f 'Makefile' ]; then
1424 make_maintainer_clean
1429 assert_no_file
'Makefile'
1432 function check_make_target
()
1486 die
"Unknown MAKE_TARGET option: $1"
1491 function bootstrap
()
1493 determine_target_platform
1497 # Set up whatever we need to do to use autoreconf later
1499 if ! autoreconf_setup
; then
1503 if [ -z "$MAKE_TARGET" ]; then
1504 MAKE_TARGET
="make_default"
1507 if $PRINT_SETUP_OPTION -o $DEBUG; then
1512 # Exit if all we were looking for were the currently used options
1513 if $PRINT_SETUP_OPTION; then
1518 # Use OLD_TESTS_ENVIRONMENT for tracking the state of the variable
1519 local OLD_TESTS_ENVIRONMENT
=
1521 # Set ENV PREFIX in order to set --prefix for ./configure
1522 if [[ -n "$PREFIX" ]]; then
1523 PREFIX_ARG
="--prefix=$PREFIX"
1526 # We should always have a target by this point
1529 local MAKE_TARGET_ARRAY
=($MAKE_TARGET)
1531 for target
in "${MAKE_TARGET_ARRAY[@]}"
1533 # If we are running inside of Jenkins, we want to only run some of the possible tests
1534 if $jenkins_build_environment; then
1535 check_make_target
$target
1564 if ! check_clang
; then
1565 die
"clang was not found"
1568 if ! make_for_clang
; then
1569 die
"Failed to build clang: $?"
1573 if ! check_clang_analyzer
; then
1574 die
"clang-analyzer was not found"
1576 if ! check_clang
; then
1577 die
"clang was not found"
1580 if ! make_for_clang_analyzer
; then
1581 die
"Failed to build clang-analyzer: $?"
1585 if ! check_mingw
; then
1586 die
"mingw was not found"
1589 if ! make_for_mingw
; then
1590 die
"Failed to build mingw: $?"
1606 make_for_continuus_integration
1609 run_configure_if_required
1610 make_target
"$target"
1618 # Variables we export
1619 declare -x VCS_CHECKOUT
=
1621 # Variables we control globally
1625 # Options for getopt
1626 local AUTORECONF_OPTION
=false
1627 local CLEAN_OPTION
=false
1628 local CONFIGURE_OPTION
=false
1629 local DEBUG_OPTION
=false
1630 local PRINT_SETUP_OPTION
=false
1631 local TARGET_OPTION
=false
1632 local TARGET_OPTION_ARG
=
1633 local VERBOSE_OPTION
=false
1635 local OLD_CONFIGURE
=
1636 local OLD_CONFIGURE_ARG
=
1639 local OLD_TESTS_ENVIRONMENT
=
1641 # If we call autoreconf on the platform or not
1642 local AUTORECONF_REBUILD_HOST
=false
1643 local AUTORECONF_REBUILD
=false
1645 local -r top_srcdir
=`pwd`
1648 if [ -z "$CONFIGURE" ]; then
1649 CONFIGURE
="$top_srcdir/configure"
1653 # Variables for determine_target_platform () and rebuild_host_os ()
1654 # UNAME_MACHINE_ARCH= uname -m
1655 # VENDOR= apple, redhat, centos, canonical
1657 # RHEL{rhel,Tikanga,Santiago}
1658 # Ubuntu{ubuntu,Lucid,Maverick,Natty,Oneiric,Precise,Quantal}
1659 # Fedora{fedora,Verne,Beefy}
1660 # OSX{osx,lion,snow,mountain}
1661 # VENDOR_DISTRIBUTION= darwin,fedora,rhel,ubuntu
1662 # UNAME_KERNEL= Linux, Darwin,...
1663 # UNAME_KERNEL_RELEASE= Linux, Darwin,...
1664 local UNAME_MACHINE_ARCH
=unknown
1665 local VENDOR
=unknown
1666 local VENDOR_RELEASE
=unknown
1667 local VENDOR_DISTRIBUTION
=unknown
1668 local UNAME_KERNEL
=unknown
1669 local UNAME_KERNEL_RELEASE
=unknown
1672 rebuild_host_os no_output
1674 parse_command_line_options $@
1676 # If we are running under Jenkins we predetermine what tests we will run against
1677 # This MAKE_TARGET can be overridden by parse_command_line_options based MAKE_TARGET changes.
1678 # We don't want Jenkins overriding other variables, so we NULL them.
1679 if [ -z "$MAKE_TARGET" ]; then
1680 if $jenkins_build_environment; then
1681 MAKE_TARGET
='jenkins'
1693 function set_branch
()
1695 if [ -z "$BRANCH" ]; then
1696 if [ -z "$CI_PROJECT_TEAM" ]; then
1697 die
"Variable CI_PROJECT_TEAM has not been set"
1699 if [ -z "$PROJECT" ]; then
1700 die
"Variable PROJECT has not been set"
1702 if [ -z "$BUILD_TAG" ]; then
1703 die
"Variable BUILD_TAG has not been set"
1706 BRANCH
="lp:~$CI_PROJECT_TEAM/$PROJECT/$BUILD_TAG"
1710 if [ -z "$BRANCH" ]; then
1711 die
"Missing values required to build BRANCH variable."
1717 if [ -z "$VCS_CHECKOUT" ]; then
1718 die
"Merges require VCS_CHECKOUT."
1723 if [[ "$VCS_CHECKOUT" == 'bzr' ]]; then
1724 if test -n "$BRANCH_TO_MERGE"; then
1725 bzr merge
$BRANCH_TO_MERGE
1726 bzr commit
--message="Merge $BRANCH_TO_MERGE Build: $BUILD_TAG" --unchanged
1730 elif [[ -n "$VCS_CHECKOUT" ]]; then
1731 die
"Merge attempt occured, current VCS setup does not support this"
1735 function enable_debug
()
1738 local caller_loc
=`caller`
1740 echo "$caller_loc Enabling debug: $1"
1742 echo "$caller_loc Enabling debug"
1752 Usage: $program_name [OPTION]..
1754 Bootstrap this package from the checked-out sources, and optionally walk through CI run.
1761 function disable_debug
()
1767 # Script begins here
1771 env_debug_enabled
=false
1772 if [[ -n "$JENKINS_HOME" ]]; then
1773 declare -r jenkins_build_environment
=true
1775 declare -r jenkins_build_environment
=false
1784 export CONFIGURE_ARG
1786 export GNU_BUILD_FLAGS
1788 export LIBTOOLIZE_OPTIONS
1791 export TESTS_ENVIRONMENT
1797 export MallocGuardEdges
1798 export MallocErrorAbort
1799 export MallocScribble
1803 # We check for DEBUG twice, once before we source the config file, and once afterward
1804 env_debug_enabled
=false
1805 if [[ -n "$DEBUG" ]]; then
1806 env_debug_enabled
=true
1811 # Variables which only can be set by .bootstrap
1812 BOOTSTRAP_SNAPSHOT
=false
1813 BOOTSTRAP_SNAPSHOT_CHECK
=
1815 if [ -f '.bootstrap' ]; then
1819 if $env_debug_enabled; then
1822 if [[ -n "$DEBUG" ]]; then
1823 enable_debug
"Enabling DEBUG from '.bootstrap'"
1828 # We do this in order to protect the case where DEBUG
1829 if ! $env_debug_enabled; then