3 # Copyright (C) 2012-2013 Brian Aker
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions are
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
13 # * Redistributions in binary form must reproduce the above
14 # copyright notice, this list of conditions and the following disclaimer
15 # in the documentation and/or other materials provided with the
18 # * The names of its contributors may not be used to endorse or
19 # promote products derived from this software without specific prior
22 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 # Environment Variables that will influence the build:
46 command_not_found_handle
()
48 warn
"$@: command not found"
54 while caller
$frame; do
65 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
70 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
76 echo "$BASH_SOURCE:$BASH_LINENO: $@"
77 #echo "$BASH_SOURCE:$BASH_LINENO: $@" >&1
82 local param_name
=\$
"$1"
83 local param_value
=`eval "expr \"$param_name\" "`
85 if [ -n "$param_value" ]; then
86 echo "$bash_source:$bash_lineno: assert($param_name) had value of "$param_value"" >&2
93 local param_name
=\$
"$1"
94 local param_value
=`eval "expr \"$param_name\" "`
96 if [ -z "$param_value" ]; then
97 echo "$bash_source:$bash_lineno: assert($param_name)" >&2
102 function assert_file
()
104 if [ ! -f "$1" ]; then
105 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
110 function assert_no_file
()
113 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) file exists: $2" >&2
118 function assert_no_directory
()
121 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) directory exists: $2" >&2
126 function assert_exec_file
()
128 if [ ! -f "$1" ]; then
129 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
133 if [ ! -x "$1" ]; then
134 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) exists but is not executable: $2" >&2
139 function command_exists
()
141 type "$1" &> /dev
/null
;
144 function rebuild_host_os
()
146 HOST_OS
="${UNAME_MACHINE_ARCH}-${VENDOR}-${VENDOR_DISTRIBUTION}-${VENDOR_RELEASE}-${UNAME_KERNEL}-${UNAME_KERNEL_RELEASE}"
149 echo "HOST_OS=$HOST_OS"
154 # Validate the distribution name, or toss an erro
155 # values: darwin,fedora,rhel,ubuntu,debian,opensuse
156 function set_VENDOR_DISTRIBUTION
()
158 local dist
=`echo "$1" | tr '[A-Z]' '[a-z]'`
161 VENDOR_DISTRIBUTION
='darwin'
164 VENDOR_DISTRIBUTION
='fedora'
167 VENDOR_DISTRIBUTION
='rhel'
170 VENDOR_DISTRIBUTION
='debian'
173 VENDOR_DISTRIBUTION
='ubuntu'
176 VENDOR_DISTRIBUTION
='opensuse'
179 VENDOR_DISTRIBUTION
='opensuse'
182 die
"attempt to set an invalid VENDOR_DISTRIBUTION=$dist"
187 # Validate a Vendor's release name/number
188 function set_VENDOR_RELEASE
()
190 local release
=`echo "$1" | tr '[A-Z]' '[a-z]'`
193 echo "VENDOR_DISTRIBUTION:$VENDOR_DISTRIBUTION"
194 echo "VENDOR_RELEASE:$release"
197 case $VENDOR_DISTRIBUTION in
201 VENDOR_RELEASE
='snow_leopard'
204 VENDOR_RELEASE
='mountain'
207 VENDOR_RELEASE
='mountain'
211 VENDOR_RELEASE
='mountain_lion'
215 VENDOR_RELEASE
='unknown'
220 VENDOR_RELEASE
="$release"
221 if [[ "x$VENDOR_RELEASE" == '18' ]]; then
222 VENDOR_RELEASE
='sphericalcow'
226 VENDOR_RELEASE
="$release"
229 VENDOR_RELEASE
="$release"
232 VENDOR_RELEASE
="$release"
233 if [[ "x$VENDOR_RELEASE" == 'x12.04' ]]; then
234 VENDOR_RELEASE
="precise"
235 elif [[ "x$VENDOR_RELEASE" == 'x12.10' ]]; then
236 VENDOR_RELEASE
="quantal"
240 VENDOR_RELEASE
="$release"
243 die
"attempt to set VENDOR_RELEASE without setting VENDOR_DISTRIBUTION"
246 die
"attempt to set with an invalid VENDOR_DISTRIBUTION=$VENDOR_DISTRIBUTION"
252 # Valid values are: apple, redhat, centos, canonical, oracle, suse
253 function set_VENDOR
()
255 local vendor
=`echo "$1" | tr '[A-Z]' '[a-z]'`
267 redhat-release-server-
*)
270 enterprise-release-
*)
292 die
"An attempt was made to set an invalid VENDOR=$_vendor"
296 set_VENDOR_DISTRIBUTION
$2
297 set_VENDOR_RELEASE
$3
299 # Set which vendor/versions we trust for autoreconf
300 case $VENDOR_DISTRIBUTION in
302 if [[ "x$VENDOR_RELEASE" == 'x18' ]]; then
303 AUTORECONF_REBUILD_HOST
=true
304 elif [[ "x$VENDOR_RELEASE" == 'xsphericalcow' ]]; then
305 AUTORECONF_REBUILD_HOST
=true
306 elif [[ "x$VENDOR_RELEASE" == 'x19' ]]; then
307 AUTORECONF_REBUILD_HOST
=true
311 if [[ "x$VENDOR_RELEASE" == 'xprecise' ]]; then
312 AUTORECONF_REBUILD_HOST
=true
313 elif [[ "x$VENDOR_RELEASE" == 'xquantal' ]]; then
314 AUTORECONF_REBUILD_HOST
=true
321 function determine_target_platform
()
323 UNAME_MACHINE_ARCH
=`(uname -m) 2>/dev/null` || UNAME_MACHINE_ARCH
=unknown
324 UNAME_KERNEL
=`(uname -s) 2>/dev/null` || UNAME_SYSTEM
=unknown
325 UNAME_KERNEL_RELEASE
=`(uname -r) 2>/dev/null` || UNAME_KERNEL_RELEASE
=unknown
327 if [[ -x '/usr/bin/sw_vers' ]]; then
328 local _VERSION
=`/usr/bin/sw_vers -productVersion`
329 set_VENDOR
'apple' 'darwin' $_VERSION
330 elif [[ $
(uname
) == 'Darwin' ]]; then
331 set_VENDOR
'apple' 'darwin' 'mountain'
332 elif [[ -f '/etc/fedora-release' ]]; then
333 local fedora_version
=`cat /etc/fedora-release | awk ' { print $3 } '`
334 set_VENDOR
'redhat' 'fedora' $fedora_version
335 elif [[ -f '/etc/centos-release' ]]; then
336 local centos_version
=`cat /etc/centos-release | awk ' { print $7 } '`
337 set_VENDOR
'centos' 'rhel' $centos_version
338 elif [[ -f '/etc/SuSE-release' ]]; then
339 local suse_distribution
=`head -1 /etc/SuSE-release | awk ' { print $1 } '`
340 local suse_version
=`head -1 /etc/SuSE-release | awk ' { print $2 } '`
341 set_VENDOR
'suse' $suse_distribution $suse_version
342 elif [[ -f '/etc/redhat-release' ]]; then
343 local rhel_version
=`cat /etc/redhat-release | awk ' { print $7 } '`
344 local _vendor
=`rpm -qf /etc/redhat-release`
345 set_VENDOR
$_vendor 'rhel' $rhel_version
346 elif [[ -f '/etc/os-release' ]]; then
347 source '/etc/os-release'
348 set_VENDOR
$ID $ID $VERSION_ID
349 elif [[ -x '/usr/bin/lsb_release' ]]; then
350 local _ID
=`/usr/bin/lsb_release -s -i`
351 local _VERSION
=`/usr/bin/lsb_release -s -r`
352 set_VENDOR
$_ID $_ID $_VERSION_ID
353 elif [[ -f '/etc/lsb-release' ]]; then
354 source '/etc/lsb-release'
355 set_VENDOR
'canonical' $DISTRIB_ID $DISTRIB_CODENAME
361 function run_configure
()
363 # We will run autoreconf if we are required
364 run_autoreconf_if_required
366 # We always begin at the root of our build
368 die
"Programmer error, we entered run_configure with a stacked directory"
371 if ! command_exists
"$CONFIGURE"; then
372 die
"$CONFIGURE does not exist"
376 if [[ -n "$BUILD_DIR" ]]; then
379 safe_pushd
$BUILD_DIR
382 # Arguments for configure
383 local BUILD_CONFIGURE_ARG
=
385 # If ENV DEBUG is set we enable both debug and asssert, otherwise we see if this is a VCS checkout and if so enable assert
386 # Set ENV ASSERT in order to enable assert.
387 # If we are doing a valgrind run, we always compile with assert disabled
388 if $valgrind_run; then
389 BUILD_CONFIGURE_ARG
+= " CXXFLAGS=-DNDEBUG "
390 BUILD_CONFIGURE_ARG
+= " CFLAGS=-DNDEBUG "
393 BUILD_CONFIGURE_ARG
+=' --enable-debug --enable-assert'
394 elif [[ -n "$VCS_CHECKOUT" ]]; then
395 BUILD_CONFIGURE_ARG
+=' --enable-assert'
399 if [[ -n "$CONFIGURE_ARG" ]]; then
400 BUILD_CONFIGURE_ARG
+=" $CONFIGURE_ARG"
403 if [[ -n "$PREFIX_ARG" ]]; then
404 BUILD_CONFIGURE_ARG
+=" $PREFIX_ARG"
408 # If we are executing on OSX use CLANG, otherwise only use it if we find it in the ENV
411 CC
=clang CXX
=clang
++ $top_srcdir/configure
$BUILD_CONFIGURE_ARG || die
"Cannot execute CC=clang CXX=clang++ configure $BUILD_CONFIGURE_ARG"
415 command_exists
'gcc44' || die
"Could not locate gcc44"
416 CC
=gcc44 CXX
=gcc44
$top_srcdir/configure
$BUILD_CONFIGURE_ARG || die
"Cannot execute CC=gcc44 CXX=gcc44 configure $BUILD_CONFIGURE_ARG"
420 $CONFIGURE $BUILD_CONFIGURE_ARG
425 if [ $ret -ne 0 ]; then
426 die
"Could not execute $CONFIGURE $BUILD_CONFIGURE_ARG"
429 if [ ! -f 'Makefile' ]; then
430 die
"Programmer error, configure was run but no Makefile existed after $CONFIGURE was run"
434 function setup_gdb_command
() {
435 GDB_TMPFILE
=$
(mktemp
/tmp
/gdb.XXXXXXXXXX
)
436 echo 'set logging overwrite on' > $GDB_TMPFILE
437 echo 'set logging on' >> $GDB_TMPFILE
438 echo 'set environment LIBTEST_IN_GDB=1' >> $GDB_TMPFILE
439 echo 'run' >> $GDB_TMPFILE
440 echo 'thread apply all bt' >> $GDB_TMPFILE
441 echo 'quit' >> $GDB_TMPFILE
442 GDB_COMMAND
="gdb -f -batch -x $GDB_TMPFILE"
445 function setup_valgrind_command
() {
446 VALGRIND_PROGRAM
=`type -p valgrind`
447 if [[ -n "$VALGRIND_PROGRAM" ]]; then
448 VALGRIND_COMMAND
="$VALGRIND_PROGRAM --error-exitcode=1 --leak-check=yes --show-reachable=yes --malloc-fill=A5 --free-fill=DE --xml=yes --xml-file=\"valgrind-%p.xml\""
452 function save_BUILD
()
454 if [[ -n "$OLD_CONFIGURE" ]]; then
455 die
"OLD_CONFIGURE($OLD_CONFIGURE) was set on push, programmer error!"
458 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
459 die
"OLD_CONFIGURE_ARG($OLD_CONFIGURE_ARG) was set on push, programmer error!"
462 if [[ -n "$OLD_PREFIX" ]]; then
463 die
"OLD_PREFIX($OLD_PREFIX) was set on push, programmer error!"
466 if [[ -n "$OLD_MAKE" ]]; then
467 die
"OLD_MAKE($OLD_MAKE) was set on push, programmer error!"
470 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
471 die
"OLD_TESTS_ENVIRONMENT($OLD_TESTS_ENVIRONMENT) was set on push, programmer error!"
474 if [[ -n "$CONFIGURE" ]]; then
475 OLD_CONFIGURE
=$CONFIGURE
478 if [[ -n "$CONFIGURE_ARG" ]]; then
479 OLD_CONFIGURE_ARG
=$CONFIGURE_ARG
482 if [[ -n "$MAKE" ]]; then
486 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
487 OLD_TESTS_ENVIRONMENT
=$TESTS_ENVIRONMENT
491 function restore_BUILD
()
493 if [[ -n "$OLD_CONFIGURE" ]]; then
494 CONFIGURE
=$OLD_CONFIGURE
497 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
498 CONFIGURE_ARG
=$OLD_CONFIGURE_ARG
501 if [[ -n "$OLD_PREFIX" ]]; then
502 PREFIX_ARG
=$OLD_PREFIX
505 if [[ -n "$OLD_MAKE" ]]; then
509 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
510 TESTS_ENVIRONMENT
=$OLD_TESTS_ENVIRONMENT
517 OLD_TESTS_ENVIRONMENT
=
522 function safe_pushd
()
524 pushd $1 &> /dev
/null
;
526 if [ -n "$BUILD_DIR" ]; then
528 echo "BUILD_DIR=$BUILD_DIR"
533 function safe_popd
()
535 local directory_to_delete
=`pwd`
537 if [ $?
-eq 0 ]; then
538 if [[ "$top_srcdir" == "$directory_to_delete" ]]; then
539 die
"We almost deleted top_srcdir($top_srcdir), programmer error"
542 rm -r -f "$directory_to_delete"
546 function make_valgrind
()
548 # If the env VALGRIND_COMMAND is set then we assume it is valid
549 local valgrind_was_set
=false
550 if [[ -z "$VALGRIND_COMMAND" ]]; then
551 setup_valgrind_command
552 if [[ -n "$VALGRIND_COMMAND" ]]; then
553 valgrind_was_set
=true
556 valgrind_was_set
=true
559 # If valgrind_was_set is set to no we bail
560 if ! $valgrind_was_set; then
561 echo 'valgrind was not present'
569 # If we are required to run configure, do so now
572 # If we don't have a configure, then most likely we will be missing libtool
573 assert_file
'configure'
574 if [[ -f 'libtool' ]]; then
575 TESTS_ENVIRONMENT
="./libtool --mode=execute $VALGRIND_COMMAND"
577 TESTS_ENVIRONMENT
="$VALGRIND_COMMAND"
583 # If we aren't going to error, we will clean up our environment
584 if [ "$ret" -eq 0 ]; then
592 if [ "$ret" -ne 0 ]; then
597 function make_install_system
()
599 local INSTALL_LOCATION
=$
(mktemp
-d /tmp
/XXXXXXXXXX
)
602 PREFIX_ARG
="--prefix=$INSTALL_LOCATION"
604 if [ ! -d $INSTALL_LOCATION ] ; then
605 die
"ASSERT temp directory not found '$INSTALL_LOCATION'"
608 run_configure
#install_buid_dir
610 make_target
'install'
612 make_target
'installcheck'
614 make_target
'uninstall'
616 rm -r -f $INSTALL_LOCATION
619 if [ -f 'Makefile' ]; then
620 die
"ASSERT Makefile should not exist"
627 function make_darwin_malloc
()
629 run_configure_if_required
631 old_MallocGuardEdges
=$MallocGuardEdges
633 old_MallocErrorAbort
=$MallocErrorAbort
635 old_MallocScribble
=$MallocScribble
640 MallocGuardEdges
=$old_MallocGuardEdges
641 MallocErrorAbort
=$old_MallocErrorAbort
642 MallocScribble
=$old_MallocScribble
645 function snapshot_check
()
647 if [ ! -f "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
651 if [ -n "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
652 assert_file
"$BOOTSTRAP_SNAPSHOT_CHECK" 'snapshot check failed'
656 # This will reset our environment, and make sure built files are available.
657 function make_for_snapshot
()
659 # Make sure it is clean
660 make_maintainer_clean
664 make_target
'distclean'
666 # We should have a configure, but no Makefile at the end of this exercise
667 assert_no_file
'Makefile'
668 assert_exec_file
'configure'
673 function check_mingw
()
675 command_exists
'mingw64-configure'
677 if [ "$ret" -ne 0 ]; then
681 command_exists
'mingw64-make'
683 if [ "$ret" -ne 0 ]; then
690 function check_clang
()
692 command_exists
'clang'
694 if [ "$ret" -ne 0 ]; then
701 function check_clang_analyzer
()
703 command_exists
'scan-build'
705 if [ "$ret" -ne 0 ]; then
712 function make_skeleton
()
717 if [ $ret -eq 0 ]; then
718 assert_file
'Makefile'
720 make_target
'all' 'warn'
722 if [ $ret -ne 0 ]; then
725 if [[ -n "$DISPLAY" ]]; then
726 if command_exists
'wine'; then
727 TESTS_ENVIRONMENT
='wine'
731 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
732 make_target
'check' 'warn' || warn
"$MAKE check failed"
737 if $jenkins_build_environment; then
738 make_target
'clean' 'warn'
745 function make_for_mingw
()
747 if ! check_mingw
; then
751 # Make sure it is clean
752 if [ -f Makefile
-o -f configure
]; then
753 make_maintainer_clean
760 CONFIGURE
='mingw64-configure'
762 CONFIGURE_ARGS
='--enable-static --disable-shared'
772 function make_for_clang
()
774 if ! check_clang
; then
778 # Make sure it is clean
779 if [ -f Makefile
-o -f configure
]; then
780 make_maintainer_clean
800 function make_for_clang_analyzer
()
802 if ! check_clang
; then
806 if ! check_clang_analyzer
; then
807 die
'clang-analyzer was not found'
810 # Make sure it is clean
811 if [ -f Makefile
-o -f configure
]; then
812 make_maintainer_clean
821 CONFIGURE_ARGS
='--enable-debug'
826 make_target
'clean' 'warn'
828 scan-build
-o clang-html
make -j4 -k
835 # If we are locally testing, we should make sure the environment is setup correctly
836 function check_for_jenkins
()
838 if ! $jenkins_build_environment; then
839 echo "Not inside of jenkins"
841 if [ -f 'configure' ]; then
842 make_maintainer_clean
845 if $BOOTSTRAP_SNAPSHOT; then
851 function make_universe
()
858 make_for_clang_analyzer
860 if [ check_mingw
-eq 0 ]; then
868 function make_for_continuus_integration
()
870 # Setup the environment if we are local
873 # No matter then evironment, we should not have a Makefile at this point
874 assert_no_file
'Makefile'
876 # Platforms which require bootstrap should have some setup done before we hit this stage.
877 # If we are building locally, skip this step, unless we are just testing locally.
878 if $BOOTSTRAP_SNAPSHOT; then
881 # If we didn't require a snapshot, then we should not have a configure
882 assert_no_file
'configure'
887 assert_no_file
'Makefile' 'Programmer error, Makefile existed where build state should have been clean'
893 assert_exec_file
'configure'
894 assert_file
'Makefile'
898 # make rpm includes "make distcheck"
899 if [[ -f rpm.am
]]; then
901 elif [[ -d rpm
]]; then
907 assert_exec_file
'configure'
908 assert_file
'Makefile'
915 assert_exec_file
'configure'
916 assert_file
'Makefile'
922 assert_exec_file
'configure'
923 assert_file
'Makefile'
927 assert_exec_file
'configure'
928 assert_file
'Makefile'
937 make_maintainer_clean
942 # The point to this test is to test bootstrap.sh itself
943 function self_test
()
945 # We start off with a clean env
946 make_maintainer_clean
948 eval "./bootstrap.sh jenkins" || die
"failed 'jenkins'"
949 eval "./bootstrap.sh all" || die
"failed 'all'"
950 eval "./bootstrap.sh gdb" || die
"failed 'gdb'"
951 eval "./bootstrap.sh maintainer-clean" || die
"failed 'maintainer-clean'"
954 function make_install_html
()
956 run_configure_if_required
957 assert_file
'configure'
959 make_target
'install-html'
966 if command_exists
'gdb'; then
967 run_configure_if_required
969 # Set ENV GDB_COMMAND
970 if [[ -z "$GDB_COMMAND" ]]; then
974 # If we don't have a configure, then most likely we will be missing libtool
975 assert_file
'configure'
976 if [[ -f 'libtool' ]]; then
977 TESTS_ENVIRONMENT
="./libtool --mode=execute $GDB_COMMAND"
979 TESTS_ENVIRONMENT
="$GDB_COMMAND"
984 if [ -f 'gdb.txt' ]; then
988 if [ -f '.gdb_history' ]; then
992 if $jenkins_build_environment; then
996 echo 'gdb was not present'
1003 # $1 target to compile
1004 # $2 to die, or not to die, based on contents
1005 function make_target
()
1007 if [ -z "$1" ]; then
1008 die
"Programmer error, no target provided for make"
1011 if [ ! -f 'Makefile' ]; then
1012 die
"Programmer error, make was called before configure"
1016 if [ -n "$TESTS_ENVIRONMENT" ]; then
1018 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
1022 if [ -z "$MAKE" ]; then
1023 die
"MAKE was not set"
1026 # $2 represents error or warn
1030 if [ $ret -ne 0 ]; then
1031 if [ -n "$2" ]; then
1032 warn
"Failed to execute $MAKE $1: $ret"
1034 die
"Failed to execute $MAKE $1: $ret"
1041 function make_distcheck
()
1043 make_target
'distcheck'
1046 function make_rpm
()
1048 if command_exists
'rpmbuild'; then
1049 if [ -f 'rpm.am' -o -d 'rpm' ]; then
1050 run_configure_if_required
1053 if $jenkins_build_environment; then
1061 function make_maintainer_clean
()
1063 run_configure_if_required
1064 make_target
'maintainer-clean' 'no_error'
1066 # Lets make sure we really cleaned up the environment
1067 assert_no_file
'Makefile'
1068 assert_no_file
'configure'
1069 assert_no_directory
'autom4te.cache'
1072 function make_check
()
1077 function make_jenkins_default
()
1083 function make_default
()
1085 run_configure_if_required
1089 function run_configure_if_required
()
1091 run_autoreconf_if_required
1093 if [ ! -f 'Makefile' ]; then
1097 assert_file
'Makefile' 'configure did not produce a Makefile'
1100 function run_make_maintainer_clean_if_possible
()
1102 if [ -f 'Makefile' ]; then
1103 make_maintainer_clean
1107 function run_autoreconf_if_required
()
1109 if [ ! -x 'configure' ]; then
1113 assert_exec_file
'configure'
1117 function run_autoreconf
()
1119 if [[ -z "$AUTORECONF" ]]; then
1120 die
"Programmer error, tried to call run_autoreconf () but AUTORECONF was not set"
1123 if test $use_libtool = 1; then
1124 assert
$BOOTSTRAP_LIBTOOLIZE
1125 run
$BOOTSTRAP_LIBTOOLIZE '--copy' '--install' '--force' || die
"Cannot execute $BOOTSTRAP_LIBTOOLIZE"
1128 run
$AUTORECONF $AUTORECONF_ARGS || die
"Cannot execute $AUTORECONF"
1130 eval 'bash -n configure' || die
"autoreconf generated a malformed configure"
1139 if [ -z "$1" ]; then
1146 function parse_command_line_options
()
1148 local SHORTOPTS
=':apcmt:dvh'
1152 while getopts "$SHORTOPTS" opt
; do
1155 AUTORECONF_OPTION
=true
1156 MAKE_TARGET
='autoreconf'
1159 PRINT_SETUP_OPTION
=true
1162 CONFIGURE_OPTION
=true
1163 MAKE_TARGET
='configure'
1165 m
) # maintainer-clean
1167 MAKE_TARGET
='clean_op'
1171 TARGET_OPTION_ARG
="$OPTARG"
1172 MAKE_TARGET
="$OPTARG"
1179 echo "bootstrap.sh [options] optional_target ..."
1180 echo " -a # Just run autoreconf";
1181 echo " -p # Print ENV";
1182 echo " -c # Just run configure";
1183 echo " -m # Just run maintainer-clean";
1184 echo " -t # Make target";
1185 echo " -d # Enable debug";
1186 echo " -h # Show help";
1187 echo " -v # Be more verbose in output";
1195 echo "Option -$OPTARG requires an argument." >&2
1199 echo "$0: error - unrecognized option $1" 1>&2
1207 if [ -n "$1" ]; then
1212 function determine_vcs
()
1214 if [[ -d '.git' ]]; then
1216 elif [[ -d '.bzr' ]]; then
1218 elif [[ -d '.svn' ]]; then
1220 elif [[ -d '.hg' ]]; then
1226 if [[ -n "$VCS_CHECKOUT" ]]; then
1231 function require_libtoolise
()
1234 grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac
>/dev
/null \
1236 grep '^[ ]*LT_INIT' configure.ac
>/dev
/null \
1240 function autoreconf_setup
()
1242 # Set ENV MAKE in order to override "make"
1243 if [[ -z "$MAKE" ]]; then
1244 if command_exists
'gmake'; then
1245 MAKE
=`type -p gmake`
1247 if command_exists
'make'; then
1252 if [ "$VCS_CHECKOUT" ]; then
1254 MAKE
="$MAKE --warn-undefined-variables"
1263 if [[ -z "$GNU_BUILD_FLAGS" ]]; then
1264 GNU_BUILD_FLAGS
="--install --force"
1268 GNU_BUILD_FLAGS
="$GNU_BUILD_FLAGS --verbose"
1271 if [ -z "$ACLOCAL_PATH" ]; then
1272 ACLOCAL_PATH
="/usr/local/share/aclocal $ACLOCAL_PATH"
1275 if [[ -z "$WARNINGS" ]]; then
1276 if [[ -n "$VCS_CHECKOUT" ]]; then
1277 WARNINGS
="all,error"
1283 if test $use_libtool = 1; then
1284 if [[ -n "$LIBTOOLIZE" ]]; then
1285 BOOTSTRAP_LIBTOOLIZE
=`type -p $LIBTOOLIZE`
1287 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1288 echo "Couldn't find user supplied libtoolize, it is required"
1292 # If we are using OSX, we first check to see glibtoolize is available
1293 if [[ "$VENDOR_DISTRIBUTION" == "darwin" ]]; then
1294 BOOTSTRAP_LIBTOOLIZE
=`type -p glibtoolize`
1296 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1297 echo "Couldn't find glibtoolize, it is required on OSX"
1301 BOOTSTRAP_LIBTOOLIZE
=`type -p libtoolize`
1303 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1304 echo "Couldn't find libtoolize, it is required"
1311 LIBTOOLIZE_OPTIONS
="--verbose $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1315 LIBTOOLIZE_OPTIONS
="--debug $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1318 # Here we set LIBTOOLIZE to true since we are going to invoke it via BOOTSTRAP_LIBTOOLIZE
1322 # Test the ENV AUTOMAKE if it exists
1323 if [[ -n "$AUTOMAKE" ]]; then
1324 run
$AUTOMAKE '--help' &> /dev
/null || die
"Failed to run AUTOMAKE:$AUTOMAKE"
1327 # Test the ENV AUTOCONF if it exists
1328 if [[ -n "$AUTOCONF" ]]; then
1329 run
$AUTOCONF '--help' &> /dev
/null || die
"Failed to run AUTOCONF:$AUTOCONF"
1332 # Test the ENV AUTOHEADER if it exists
1333 if [[ -n "$AUTOHEADER" ]]; then
1334 run
$AUTOHEADER '--help' &> /dev
/null || die
"Failed to run AUTOHEADER:$AUTOHEADER"
1337 # Test the ENV AUTOM4TE if it exists
1338 if [[ -n "$AUTOM4TE" ]]; then
1339 run
$AUTOM4TE '--help' &> /dev
/null || die
"Failed to run AUTOM4TE:$AUTOM4TE"
1342 # Test the ENV AUTOHEADER if it exists, if not we add one and add --install
1343 if [[ -z "$ACLOCAL" ]]; then
1344 ACLOCAL
="aclocal --install"
1346 run
$ACLOCAL '--help' &> /dev
/null || die
"Failed to run ACLOCAL:$ACLOCAL"
1348 if [[ -z "$AUTORECONF" ]]; then
1349 AUTORECONF
=`type -p autoreconf`
1351 if [[ -z "$AUTORECONF" ]]; then
1352 die
"Couldn't find autoreconf"
1355 if [[ -n "$GNU_BUILD_FLAGS" ]]; then
1356 AUTORECONF_ARGS
="$GNU_BUILD_FLAGS"
1360 run
$AUTORECONF '--help' &> /dev
/null || die
"Failed to run AUTORECONF:$AUTORECONF"
1363 function print_setup
()
1365 saved_debug_status
=$DEBUG
1370 echo '----------------------------------------------'
1371 echo 'BOOTSTRAP ENV'
1372 echo "AUTORECONF=$AUTORECONF"
1373 echo "HOST_OS=$HOST_OS"
1374 echo "VENDOR=$VENDOR"
1375 echo "VENDOR_DISTRIBUTION=$VENDOR_DISTRIBUTION"
1376 echo "VENDOR_RELEASE=$VENDOR_RELEASE"
1379 if $AUTORECONF_OPTION; then
1383 if $CLEAN_OPTION; then
1387 if $CONFIGURE_OPTION; then
1391 if $DEBUG_OPTION; then
1395 if $PRINT_SETUP_OPTION; then
1399 if $TARGET_OPTION; then
1400 echo "--target=$TARGET_OPTION_ARG"
1403 if $VERBOSE_OPTION; then
1407 if [[ -n "$MAKE" ]]; then
1411 if [[ -n "$MAKE_TARGET" ]]; then
1412 echo "MAKE_TARGET=$MAKE_TARGET"
1415 if [[ -n "$PREFIX" ]]; then
1416 echo "PREFIX=$PREFIX"
1419 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
1420 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
1423 if [[ -n "$VCS_CHECKOUT" ]]; then
1424 echo "VCS_CHECKOUT=$VCS_CHECKOUT"
1435 if [[ -n "$WARNINGS" ]]; then
1436 echo "WARNINGS=$WARNINGS"
1438 echo '----------------------------------------------'
1440 if $saved_debug_status; then
1445 function make_clean_option
()
1447 run_configure_if_required
1449 make_maintainer_clean
1451 if [[ "$VCS_CHECKOUT" == 'git' ]]; then
1452 run
"$VCS_CHECKOUT" status
--ignored
1453 elif [[ -n "$VCS_CHECKOUT" ]]; then
1454 run
"$VCS_CHECKOUT" status
1458 function make_for_autoreconf
()
1460 if [ -f 'Makefile' ]; then
1461 make_maintainer_clean
1466 assert_no_file
'Makefile'
1469 function check_make_target
()
1523 echo "Matched default"
1531 function bootstrap
()
1533 determine_target_platform
1537 # Set up whatever we need to do to use autoreconf later
1539 if ! autoreconf_setup
; then
1543 if [ -z "$MAKE_TARGET" ]; then
1544 MAKE_TARGET
="make_default"
1547 if $PRINT_SETUP_OPTION -o $DEBUG; then
1552 # Exit if all we were looking for were the currently used options
1553 if $PRINT_SETUP_OPTION; then
1558 # Use OLD_TESTS_ENVIRONMENT for tracking the state of the variable
1559 local OLD_TESTS_ENVIRONMENT
=
1561 # Set ENV PREFIX in order to set --prefix for ./configure
1562 if [[ -n "$PREFIX" ]]; then
1563 PREFIX_ARG
="--prefix=$PREFIX"
1566 # We should always have a target by this point
1569 local MAKE_TARGET_ARRAY
=($MAKE_TARGET)
1571 for target
in "${MAKE_TARGET_ARRAY[@]}"
1573 # If we are running inside of Jenkins, we want to only run some of the possible tests
1574 if $jenkins_build_environment; then
1575 check_make_target
$target
1577 if [ $ret -ne 0 ]; then
1578 die
"Unknown MAKE_TARGET option: $target"
1582 local snapshot_run
=false
1583 local valgrind_run
=false
1611 if ! check_clang
; then
1612 die
"clang was not found"
1615 if ! make_for_clang
; then
1616 die
"Failed to build clang: $?"
1620 if ! check_clang_analyzer
; then
1621 die
"clang-analyzer was not found"
1623 if ! check_clang
; then
1624 die
"clang was not found"
1627 if ! make_for_clang_analyzer
; then
1628 die
"Failed to build clang-analyzer: $?"
1632 if ! check_mingw
; then
1633 die
"mingw was not found"
1636 if ! make_for_mingw
; then
1637 die
"Failed to build mingw: $?"
1651 make_maintainer_clean
1658 make_for_continuus_integration
1661 run_configure_if_required
1662 make_target
"$target"
1666 if $jenkins_build_environment; then
1667 if ! $snapshot_run; then
1668 run_make_maintainer_clean_if_possible
1677 # Variables we export
1678 declare -x VCS_CHECKOUT
=
1680 # Variables we control globally
1684 # Options for getopt
1685 local AUTORECONF_OPTION
=false
1686 local CLEAN_OPTION
=false
1687 local CONFIGURE_OPTION
=false
1688 local DEBUG_OPTION
=false
1689 local PRINT_SETUP_OPTION
=false
1690 local TARGET_OPTION
=false
1691 local TARGET_OPTION_ARG
=
1692 local VERBOSE_OPTION
=false
1694 local OLD_CONFIGURE
=
1695 local OLD_CONFIGURE_ARG
=
1698 local OLD_TESTS_ENVIRONMENT
=
1700 # If we call autoreconf on the platform or not
1701 local AUTORECONF_REBUILD_HOST
=false
1702 local AUTORECONF_REBUILD
=false
1704 local -r top_srcdir
=`pwd`
1707 if [ -z "$CONFIGURE" ]; then
1708 CONFIGURE
="$top_srcdir/configure"
1712 # Variables for determine_target_platform () and rebuild_host_os ()
1713 # UNAME_MACHINE_ARCH= uname -m
1714 # VENDOR= apple, redhat, centos, canonical
1716 # RHEL{rhel,Tikanga,Santiago}
1717 # Ubuntu{ubuntu,Lucid,Maverick,Natty,Oneiric,Precise,Quantal}
1718 # Fedora{fedora,Verne,Beefy}
1719 # OSX{osx,lion,snow,mountain}
1720 # VENDOR_DISTRIBUTION= darwin,fedora,rhel,ubuntu
1721 # UNAME_KERNEL= Linux, Darwin,...
1722 # UNAME_KERNEL_RELEASE= Linux, Darwin,...
1723 local UNAME_MACHINE_ARCH
=unknown
1724 local VENDOR
=unknown
1725 local VENDOR_RELEASE
=unknown
1726 local VENDOR_DISTRIBUTION
=unknown
1727 local UNAME_KERNEL
=unknown
1728 local UNAME_KERNEL_RELEASE
=unknown
1731 rebuild_host_os no_output
1733 parse_command_line_options $@
1735 # If we are running under Jenkins we predetermine what tests we will run against
1736 # This MAKE_TARGET can be overridden by parse_command_line_options based MAKE_TARGET changes.
1737 # We don't want Jenkins overriding other variables, so we NULL them.
1738 if [ -z "$MAKE_TARGET" ]; then
1739 if $jenkins_build_environment; then
1740 if [[ -n "$label" ]]; then
1741 check_make_target
$label
1742 if [ $?
-eq 0 ]; then
1743 MAKE_TARGET
="$label"
1747 if [ -z "$MAKE_TARGET" ]; then
1761 function set_branch
()
1763 if [ -z "$BRANCH" ]; then
1764 if [ -z "$CI_PROJECT_TEAM" ]; then
1765 die
"Variable CI_PROJECT_TEAM has not been set"
1767 if [ -z "$PROJECT" ]; then
1768 die
"Variable PROJECT has not been set"
1770 if [ -z "$BUILD_TAG" ]; then
1771 die
"Variable BUILD_TAG has not been set"
1774 BRANCH
="lp:~$CI_PROJECT_TEAM/$PROJECT/$BUILD_TAG"
1778 if [ -z "$BRANCH" ]; then
1779 die
"Missing values required to build BRANCH variable."
1785 if [ -z "$VCS_CHECKOUT" ]; then
1786 die
"Merges require VCS_CHECKOUT."
1791 if [[ "$VCS_CHECKOUT" == 'bzr' ]]; then
1792 if test -n "$BRANCH_TO_MERGE"; then
1793 bzr merge
$BRANCH_TO_MERGE
1794 bzr commit
--message="Merge $BRANCH_TO_MERGE Build: $BUILD_TAG" --unchanged
1798 elif [[ -n "$VCS_CHECKOUT" ]]; then
1799 die
"Merge attempt occured, current VCS setup does not support this"
1803 function enable_debug
()
1806 local caller_loc
=`caller`
1808 echo "$caller_loc Enabling debug: $1"
1810 echo "$caller_loc Enabling debug"
1820 Usage: $program_name [OPTION]..
1822 Bootstrap this package from the checked-out sources, and optionally walk through CI run.
1829 function disable_debug
()
1835 # Script begins here
1839 env_debug_enabled
=false
1840 if [[ -n "$JENKINS_HOME" ]]; then
1841 declare -r jenkins_build_environment
=true
1843 declare -r jenkins_build_environment
=false
1852 export CONFIGURE_ARG
1854 export GNU_BUILD_FLAGS
1856 export LIBTOOLIZE_OPTIONS
1859 export TESTS_ENVIRONMENT
1865 export MallocGuardEdges
1866 export MallocErrorAbort
1867 export MallocScribble
1871 # We check for DEBUG twice, once before we source the config file, and once afterward
1872 env_debug_enabled
=false
1873 if [[ -n "$DEBUG" ]]; then
1874 env_debug_enabled
=true
1879 # Variables which only can be set by .bootstrap
1880 BOOTSTRAP_SNAPSHOT
=false
1881 BOOTSTRAP_SNAPSHOT_CHECK
=
1883 if [ -f '.bootstrap' ]; then
1887 if $env_debug_enabled; then
1890 if [[ -n "$DEBUG" ]]; then
1891 enable_debug
"Enabling DEBUG from '.bootstrap'"
1896 # We do this in order to protect the case where DEBUG
1897 if ! $env_debug_enabled; then