DESCRIPTION
-----------
-memcached_cas() overwrites data in the server as long as the "cas" value is
-still the same in the server. You can get the cas value of a result by
-calling memcached_result_cas() on a memcached_result_st(3) structure. At the point
-that this note was written cas is still buggy in memached. Turning on tests
-for it in libmemcached(3) is optional. Please see memcached_set() for
-information on how to do this.
-
-memcached_cas_by_key() method behaves in a similar method as the non key
-methods. The difference is that it uses the group_key parameter to map
-objects to particular servers.
-
-memcached_cas() is testsed with the \ ``MEMCACHED_BEHAVIOR_USE_UDP``\
-behavior enabled. However, when using these operations with this behavior on, there
-are limits to the size of the payload being sent to the server. The reason for
-these limits is that the Memcached Server does not allow multi-datagram requests
-and the current server implementation sets a datagram size to 1400 bytes. Due
-to protocol overhead, the actual limit of the user supplied data is less than
-1400 bytes and depends on the protocol in use as, well as the operation being
-executed. When running with the binary protocol, \ `` MEMCACHED_BEHAVIOR_BINARY_PROTOCOL``\ ,
-the size of the key,value, flags and expiry combined may not exceed 1368 bytes.
-When running with the ASCII protocol, the exact limit fluctuates depending on
-which function is being executed and whether the function is a cas operation
-or not. For non-cas ASCII set operations, there are at least 1335 bytes available
-to split among the key, key_prefix, and value; for cas ASCII operations there are
-at least 1318 bytes available to split among the key, key_prefix and value. If the
-total size of the command, including overhead, exceeds 1400 bytes, a \ ``MEMCACHED_WRITE_FAILURE``\
-will be returned.
+:c:func:`memcached_cas()` overwrites data in the server as long as the "cas"
+value is still the same in the server. You can get the cas value of a result
+by calling :c:func:`memcached_result_cas()` on a memcached_result_st(3)
+structure. At the point that this note was written cas is still buggy in memached. Turning on tests for it in libmemcached(3) is optional. Please see
+:c:func:`memcached_set()` for information on how to do this.
+
+:c:func:`memcached_cas_by_key()` method behaves in a similar method as the non
+key methods. The difference is that it uses the :c:type:`group_key` parameter
+to map objects to particular servers.
+
+:c:func:`memcached_cas()` is testsed with the :c:type:`MEMCACHED_BEHAVIOR_USE_UDP` behavior enabled. However, when using these operations with this behavior
+on, there are limits to the size of the payload being sent to the server. The
+reason for these limits is that the Memcached Server does not allow
+multi-datagram requests and the current server implementation sets a datagram
+size to 1400 bytes. Due to protocol overhead, the actual limit of the user
+supplied data is less than 1400 bytes and depends on the protocol in use as,
+well as the operation being executed. When running with the binary protocol,
+:c:type:`MEMCACHED_BEHAVIOR_BINARY_PROTOCOL`, the size of the key,value,
+flags and expiry combined may not exceed 1368 bytes. When running with the
+ASCII protocol, the exact limit fluctuates depending on which function is
+being executed and whether the function is a cas operation or not. For
+non-cas ASCII set operations, there are at least 1335 bytes available to
+split among the key, key_prefix, and value; for cas ASCII operations there
+are at least 1318 bytes available to split among the key, key_prefix and value. If the total size of the command, including overhead, exceeds 1400 bytes, a :c:type:`MEMCACHED_WRITE_FAILURE` will be returned.
------
------
-All methods return a value of type \ ``memcached_return_t``\ .
-On success the value will be \ ``MEMCACHED_SUCCESS``\ .
-Use memcached_strerror() to translate this value to a printable string.
+All methods return a value of type :c:type:`memcached_return_t`.
+On success the value will be :c:type:`MEMCACHED_SUCCESS`.
+Use :c:func:`memcached_strerror()` to translate this value to a printable
+string.
----
--------
-memcached(1) libmemached(3) memcached_strerror(3) memcached_set(3) memcached_append(3) memcached_add(3) memcached_prepend(3) memcached_replace(3)
+:manpage:`memcached(1)` :manpage:`libmemached(3)` :manpage:`memcached_strerror(3)` :manpage:`memcached_set(3)` :manpage:`memcached_append(3)` :manpage:`memcached_add(3)` :manpage:`memcached_prepend(3)` :manpage:`memcached_replace(3)`