function set_VENDOR_RELEASE ()
{
local release=`echo "$1" | tr '[A-Z]' '[a-z]'`
- case "$VENDOR_DISTRIBUTION" in
+
+ if $DEBUG; then
+ echo "VENDOR_DISTRIBUTION:$VENDOR_DISTRIBUTION"
+ echo "VENDOR_RELEASE:$release"
+ fi
+
+ case $VENDOR_DISTRIBUTION in
darwin)
- case "$VENDOR_DISTRIBUTION" in
+ case $release in
10.6*)
VENDOR_RELEASE='snow_leopard'
;;
mountain)
VENDOR_RELEASE='mountain'
;;
- 10.8*)
+ 10.8.*)
+ echo "mountain_lion"
VENDOR_RELEASE='mountain_lion'
;;
*)
+ echo $VENDOR_RELEASE
VENDOR_RELEASE='unknown'
;;
esac
VENDOR_RELEASE="precise"
elif [[ "x$VENDOR_RELEASE" == 'x12.10' ]]; then
VENDOR_RELEASE="quantal"
+ elif [[ "x$VENDOR_RELEASE" == 'x13.04' ]]; then
+ VENDOR_RELEASE="raring"
fi
;;
opensuse)
local BUILD_CONFIGURE_ARG=
# If ENV DEBUG is set we enable both debug and asssert, otherwise we see if this is a VCS checkout and if so enable assert
- # Set ENV ASSERT in order to enable assert
- if $DEBUG; then
- BUILD_CONFIGURE_ARG+=' --enable-debug --enable-assert'
- elif [[ -n "$VCS_CHECKOUT" ]]; then
- BUILD_CONFIGURE_ARG+=' --enable-assert'
+ # Set ENV ASSERT in order to enable assert.
+ # If we are doing a valgrind run, we always compile with assert disabled
+ if $valgrind_run; then
+ BUILD_CONFIGURE_ARG+= '--enable-assert=no'
+ else
+ if $DEBUG; then
+ BUILD_CONFIGURE_ARG+=' --enable-debug --enable-assert'
+ elif [[ -n "$VCS_CHECKOUT" ]]; then
+ BUILD_CONFIGURE_ARG+=' --enable-assert'
+ fi
fi
if [[ -n "$CONFIGURE_ARG" ]]; then
function setup_valgrind_command () {
VALGRIND_PROGRAM=`type -p valgrind`
if [[ -n "$VALGRIND_PROGRAM" ]]; then
- VALGRIND_COMMAND="$VALGRIND_PROGRAM --error-exitcode=1 --leak-check=yes --show-reachable=yes --track-fds=yes --malloc-fill=A5 --free-fill=DE"
+ VALGRIND_COMMAND="$VALGRIND_PROGRAM --error-exitcode=1 --leak-check=yes --malloc-fill=A5 --free-fill=DE --xml=yes --xml-file=\"valgrind-%p.xml\""
fi
}
function make_valgrind ()
{
- if [[ "$VENDOR_DISTRIBUTION" == 'darwin' ]]; then
- make_darwin_malloc
- return
- fi
-
# If the env VALGRIND_COMMAND is set then we assume it is valid
local valgrind_was_set=false
if [[ -z "$VALGRIND_COMMAND" ]]; then
save_BUILD
+ valgrind_run=true
+
# If we are required to run configure, do so now
- run_configure_if_required
+ run_configure
# If we don't have a configure, then most likely we will be missing libtool
assert_file 'configure'
- if [[ -f 'libtool' ]]; then
+ if [[ -x 'libtool' ]]; then
TESTS_ENVIRONMENT="./libtool --mode=execute $VALGRIND_COMMAND"
else
TESTS_ENVIRONMENT="$VALGRIND_COMMAND"
fi
- make_target 'check' || return 1
+ make_target 'all'
+ make_target 'check'
+ ret=$?
+
+ # If we aren't going to error, we will clean up our environment
+ if [ "$ret" -eq 0 ]; then
+ make 'distclean'
+ fi
+
+ valgrind_run=false
restore_BUILD
+
+ if [ "$ret" -ne 0 ]; then
+ return 1
+ fi
}
function make_install_system ()
MallocScribble=$old_MallocScribble
}
-function snapshot_check ()
-{
- if [ ! -f "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
- make_for_snapshot
- fi
-
- if [ -n "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
- assert_file "$BOOTSTRAP_SNAPSHOT_CHECK" 'snapshot check failed'
- fi
-}
-
# This will reset our environment, and make sure built files are available.
function make_for_snapshot ()
{
- # Make sure it is clean
- make_maintainer_clean
+ # Lets make sure we have a clean environment
+ assert_no_file 'Makefile'
+ assert_no_file 'configure'
+ assert_no_directory 'autom4te.cache'
run_configure
- make_target 'dist'
+ make_target 'all'
make_target 'distclean'
# We should have a configure, but no Makefile at the end of this exercise
assert_no_file 'Makefile'
assert_exec_file 'configure'
-
- snapshot_check
}
function check_mingw ()
function check_for_jenkins ()
{
if ! $jenkins_build_environment; then
- echo "Not inside of jenkins"
+ echo "Not inside of jenkins, simulating environment"
if [ -f 'configure' ]; then
make_maintainer_clean
make_install_system
}
+function check_snapshot ()
+{
+ if [ -n "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
+ assert_file "$BOOTSTRAP_SNAPSHOT_CHECK" 'snapshot check failed'
+ fi
+}
+
function make_for_continuus_integration ()
{
# Setup the environment if we are local
# Platforms which require bootstrap should have some setup done before we hit this stage.
# If we are building locally, skip this step, unless we are just testing locally.
if $BOOTSTRAP_SNAPSHOT; then
- snapshot_check
+ if $BOOTSTRAP_SNAPSHOT; then
+ assert_file 'configure'
+ fi
+
+ check_snapshot
else
# If we didn't require a snapshot, then we should not have a configure
assert_no_file 'configure'
assert_no_file 'Makefile' 'Programmer error, Makefile existed where build state should have been clean'
case $HOST_OS in
- *-fedora-*)
- run_configure
-
- assert_exec_file 'configure'
- assert_file 'Makefile'
-
- make_target 'all'
-
- # make rpm includes "make distcheck"
- if [[ -f rpm.am ]]; then
- make_rpm
- elif [[ -d rpm ]]; then
- make_rpm
- else
- make_distcheck
- fi
-
- assert_exec_file 'configure'
- assert_file 'Makefile'
-
- make_install_system
- ;;
- *-precise-*)
- run_configure
-
- assert_exec_file 'configure'
- assert_file 'Makefile'
-
- make_target 'all'
-
- make_distcheck
-
- assert_exec_file 'configure'
- assert_file 'Makefile'
-
- make_valgrind
-
- assert_exec_file 'configure'
- assert_file 'Makefile'
-
- make_install_system
- ;;
*)
make_jenkins_default
;;
run $BOOTSTRAP_LIBTOOLIZE '--copy' '--install' '--force' || die "Cannot execute $BOOTSTRAP_LIBTOOLIZE"
fi
- run $AUTORECONF || die "Cannot execute $AUTORECONF"
+ run $AUTORECONF $AUTORECONF_ARGS || die "Cannot execute $AUTORECONF"
eval 'bash -n configure' || die "autoreconf generated a malformed configure"
}
fi
fi
fi
+
if $VERBOSE; then
LIBTOOLIZE_OPTIONS="--verbose $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
fi
+
if $DEBUG; then
LIBTOOLIZE_OPTIONS="--debug $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
fi
+
+ # Here we set LIBTOOLIZE to true since we are going to invoke it via BOOTSTRAP_LIBTOOLIZE
LIBTOOLIZE=true
fi
fi
if [[ -n "$GNU_BUILD_FLAGS" ]]; then
- AUTORECONF="$AUTORECONF $GNU_BUILD_FLAGS"
+ AUTORECONF_ARGS="$GNU_BUILD_FLAGS"
fi
fi
fi
local snapshot_run=false
+ local valgrind_run=false
case $target in
'self')
'snapshot')
make_for_snapshot
snapshot_run=true
+ check_snapshot
;;
'rpm')
make_rpm
;;
+ 'darwin_malloc')
+ make_darwin_malloc
+ ;;
'valgrind')
+ make_maintainer_clean
make_valgrind
;;
'universe')
MAKE_TARGET="$label"
fi
fi
+ if [[ -n "$LABEL" ]]; then
+ check_make_target $LABEL
+ if [ $? -eq 0 ]; then
+ MAKE_TARGET="$LABEL"
+ fi
+ fi
if [ -z "$MAKE_TARGET" ]; then
MAKE_TARGET='jenkins'