3 # Copyright (C) 2012-2013 Brian Aker
6 # Redistribution and use in source and binary forms, with or without
7 # modification, are permitted provided that the following conditions are
10 # * Redistributions of source code must retain the above copyright
11 # notice, this list of conditions and the following disclaimer.
13 # * Redistributions in binary form must reproduce the above
14 # copyright notice, this list of conditions and the following disclaimer
15 # in the documentation and/or other materials provided with the
18 # * The names of its contributors may not be used to endorse or
19 # promote products derived from this software without specific prior
22 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
25 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
26 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
27 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
28 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
32 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35 # Environment Variables that will influence the build:
46 command_not_found_handle
()
48 warn
"$@: command not found"
54 while caller
$frame; do
65 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
70 echo "$BASH_SOURCE:$BASH_LINENO: $@" >&2
76 echo "$BASH_SOURCE:$BASH_LINENO: $@"
77 #echo "$BASH_SOURCE:$BASH_LINENO: $@" >&1
82 local param_name
=\$
"$1"
83 local param_value
=`eval "expr \"$param_name\" "`
85 if [ -n "$param_value" ]; then
86 echo "$bash_source:$bash_lineno: assert($param_name) had value of "$param_value"" >&2
93 local param_name
=\$
"$1"
94 local param_value
=`eval "expr \"$param_name\" "`
96 if [ -z "$param_value" ]; then
97 echo "$bash_source:$bash_lineno: assert($param_name)" >&2
102 function assert_file
()
104 if [ ! -f "$1" ]; then
105 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
110 function assert_no_file
()
113 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) file exists: $2" >&2
118 function assert_no_directory
()
121 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) directory exists: $2" >&2
126 function assert_exec_file
()
128 if [ ! -f "$1" ]; then
129 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) does not exist: $2" >&2
133 if [ ! -x "$1" ]; then
134 echo "$BASH_SOURCE:$BASH_LINENO: assert($1) exists but is not executable: $2" >&2
139 function command_exists
()
141 type "$1" &> /dev
/null
;
144 function rebuild_host_os
()
146 HOST_OS
="${UNAME_MACHINE_ARCH}-${VENDOR}-${VENDOR_DISTRIBUTION}-${VENDOR_RELEASE}-${UNAME_KERNEL}-${UNAME_KERNEL_RELEASE}"
149 echo "HOST_OS=$HOST_OS"
154 # Valid values are: darwin,fedora,rhel,ubuntu
155 function set_VENDOR_DISTRIBUTION
()
157 local dist
=`echo "$1" | tr '[A-Z]' '[a-z]'`
160 VENDOR_DISTRIBUTION
='darwin'
163 VENDOR_DISTRIBUTION
='fedora'
166 VENDOR_DISTRIBUTION
='rhel'
169 VENDOR_DISTRIBUTION
='ubuntu'
172 VENDOR_DISTRIBUTION
='opensuse'
175 die
"attempt to set an invalid VENDOR_DISTRIBUTION=$dist"
180 function set_VENDOR_RELEASE
()
182 local release
=`echo "$1" | tr '[A-Z]' '[a-z]'`
183 case "$VENDOR_DISTRIBUTION" in
185 VENDOR_RELEASE
='mountain'
188 VENDOR_RELEASE
="$release"
191 VENDOR_RELEASE
="$release"
194 VENDOR_RELEASE
="$release"
197 VENDOR_RELEASE
="$release"
200 die
"attempt to set VENDOR_RELEASE without setting VENDOR_DISTRIBUTION"
203 die
"attempt to set with an invalid VENDOR_DISTRIBUTION=$VENDOR_DISTRIBUTION"
209 # Valid values are: apple, redhat, centos, canonical
210 function set_VENDOR
()
212 local vendor
=`echo "$1" | tr '[A-Z]' '[a-z]'`
231 die
"An attempt was made to set an invalid VENDOR=$_vendor"
235 set_VENDOR_DISTRIBUTION
$2
236 set_VENDOR_RELEASE
$3
239 function determine_target_platform
()
241 UNAME_MACHINE_ARCH
=`(uname -m) 2>/dev/null` || UNAME_MACHINE_ARCH
=unknown
242 UNAME_KERNEL
=`(uname -s) 2>/dev/null` || UNAME_SYSTEM
=unknown
243 UNAME_KERNEL_RELEASE
=`(uname -r) 2>/dev/null` || UNAME_KERNEL_RELEASE
=unknown
245 if [[ $
(uname
) == 'Darwin' ]]; then
246 set_VENDOR
'apple' 'darwin' 'mountain'
247 elif [[ -f '/etc/fedora-release' ]]; then
248 local fedora_version
=`cat /etc/fedora-release | awk ' { print $3 } '`
249 set_VENDOR
'redhat' 'fedora' $fedora_version
250 if [[ "x$VENDOR_RELEASE" == 'x17' ]]; then
251 AUTORECONF_REBUILD_HOST
=true
253 elif [[ -f '/etc/centos-release' ]]; then
254 local centos_version
=`cat /etc/centos-release | awk ' { print $7 } '`
255 set_VENDOR
'centos' 'rhel' $centos_version
256 elif [[ -f '/etc/SuSE-release' ]]; then
257 local suse_distribution
=`head -1 /etc/SuSE-release | awk ' { print $1 } '`
258 local suse_version
=`head -1 /etc/SuSE-release | awk ' { print $2 } '`
259 set_VENDOR
'suse' $suse_distribution $suse_version
260 elif [[ -f '/etc/redhat-release' ]]; then
261 local rhel_version
=`cat /etc/redhat-release | awk ' { print $7 } '`
262 set_VENDOR
'redhat' 'rhel' $rhel_version
263 elif [[ -f '/etc/lsb-release' ]]; then
264 local debian_DISTRIB_ID
=`cat /etc/lsb-release | grep DISTRIB_ID | awk -F= ' { print $2 } '`
265 local debian_version
=`cat /etc/lsb-release | grep DISTRIB_CODENAME | awk -F= ' { print $2 } '`
266 set_VENDOR
'canonical' $debian_DISTRIB_ID $debian_version
267 if [[ "x$VENDOR_RELEASE" == 'xprecise' ]]; then
268 AUTORECONF_REBUILD_HOST
=true
275 function run_configure
()
277 # We will run autoreconf if we are required
278 run_autoreconf_if_required
280 # We always begin at the root of our build
282 die
"Programmer error, we entered run_configure with a stacked directory"
285 if ! command_exists
"$CONFIGURE"; then
286 die
"$CONFIGURE does not exist"
290 if [[ -n "$BUILD_DIR" ]]; then
293 safe_pushd
$BUILD_DIR
296 # Arguments for configure
297 local BUILD_CONFIGURE_ARG
=
299 # Set ENV DEBUG in order to enable debugging
301 BUILD_CONFIGURE_ARG
='--enable-debug'
304 # Set ENV ASSERT in order to enable assert
305 if [[ -n "$ASSERT" ]]; then
307 ASSERT_ARG
='--enable-assert'
308 BUILD_CONFIGURE_ARG
="$ASSERT_ARG $BUILD_CONFIGURE_ARG"
311 if [[ -n "$CONFIGURE_ARG" ]]; then
312 BUILD_CONFIGURE_ARG
= "$BUILD_CONFIGURE_ARG $CONFIGURE_ARG"
316 # If we are executing on OSX use CLANG, otherwise only use it if we find it in the ENV
319 CC
=clang CXX
=clang
++ $top_srcdir/configure
$BUILD_CONFIGURE_ARG || die
"Cannot execute CC=clang CXX=clang++ configure $BUILD_CONFIGURE_ARG $PREFIX_ARG"
323 command_exists
'gcc44' || die
"Could not locate gcc44"
324 CC
=gcc44 CXX
=gcc44
$top_srcdir/configure
$BUILD_CONFIGURE_ARG $PREFIX_ARG || die
"Cannot execute CC=gcc44 CXX=gcc44 configure $BUILD_CONFIGURE_ARG $PREFIX_ARG"
328 $CONFIGURE $BUILD_CONFIGURE_ARG $PREFIX_ARG
333 if [ $ret -ne 0 ]; then
334 die
"Could not execute $CONFIGURE $BUILD_CONFIGURE_ARG $PREFIX_ARG"
337 if [ ! -f 'Makefile' ]; then
338 die
"Programmer error, configure was run but no Makefile existed after $CONFIGURE was run"
342 function setup_gdb_command
() {
343 GDB_TMPFILE
=$
(mktemp
/tmp
/gdb.XXXXXXXXXX
)
344 echo 'set logging overwrite on' > $GDB_TMPFILE
345 echo 'set logging on' >> $GDB_TMPFILE
346 echo 'set environment LIBTEST_IN_GDB=1' >> $GDB_TMPFILE
347 echo 'run' >> $GDB_TMPFILE
348 echo 'thread apply all bt' >> $GDB_TMPFILE
349 echo 'quit' >> $GDB_TMPFILE
350 GDB_COMMAND
="gdb -f -batch -x $GDB_TMPFILE"
353 function setup_valgrind_command
() {
354 VALGRIND_PROGRAM
=`type -p valgrind`
355 if [[ -n "$VALGRIND_PROGRAM" ]]; then
356 VALGRIND_COMMAND
="$VALGRIND_PROGRAM --error-exitcode=1 --leak-check=yes --show-reachable=yes --track-fds=yes --malloc-fill=A5 --free-fill=DE"
360 function save_BUILD
()
362 if [[ -n "$OLD_CONFIGURE" ]]; then
363 die
"OLD_CONFIGURE($OLD_CONFIGURE) was set on push, programmer error!"
366 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
367 die
"OLD_CONFIGURE_ARG($OLD_CONFIGURE_ARG) was set on push, programmer error!"
370 if [[ -n "$OLD_MAKE" ]]; then
371 die
"OLD_MAKE($OLD_MAKE) was set on push, programmer error!"
374 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
375 die
"OLD_TESTS_ENVIRONMENT($OLD_TESTS_ENVIRONMENT) was set on push, programmer error!"
378 if [[ -n "$CONFIGURE" ]]; then
379 OLD_CONFIGURE
=$CONFIGURE
382 if [[ -n "$CONFIGURE_ARG" ]]; then
383 OLD_CONFIGURE_ARG
=$CONFIGURE_ARG
386 if [[ -n "$MAKE" ]]; then
390 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
391 OLD_TESTS_ENVIRONMENT
=$TESTS_ENVIRONMENT
395 function restore_BUILD
()
397 if [[ -n "$OLD_CONFIGURE" ]]; then
398 CONFIGURE
=$OLD_CONFIGURE
401 if [[ -n "$OLD_CONFIGURE_ARG" ]]; then
402 CONFIGURE_ARG
=$OLD_CONFIGURE_ARG
405 if [[ -n "$OLD_MAKE" ]]; then
409 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
410 TESTS_ENVIRONMENT
=$OLD_TESTS_ENVIRONMENT
416 OLD_TESTS_ENVIRONMENT
=
421 function push_PREFIX_ARG
()
423 if [[ -n "$OLD_PREFIX_ARG" ]]; then
424 die
"OLD_PREFIX_ARG was set on push, programmer error!"
427 if [[ -n "$PREFIX_ARG" ]]; then
428 OLD_PREFIX_ARG
=$PREFIX_ARG
432 if [[ -n "$1" ]]; then
433 PREFIX_ARG
="--prefix=$1"
437 function pop_PREFIX_ARG
()
439 if [[ -n "$OLD_PREFIX_ARG" ]]; then
440 PREFIX_ARG
=$OLD_PREFIX_ARG
447 function push_TESTS_ENVIRONMENT
()
449 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
450 die
"OLD_TESTS_ENVIRONMENT was set on push, programmer error!"
453 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
454 OLD_TESTS_ENVIRONMENT
=$TESTS_ENVIRONMENT
459 function pop_TESTS_ENVIRONMENT
()
462 if [[ -n "$OLD_TESTS_ENVIRONMENT" ]]; then
463 TESTS_ENVIRONMENT
=$OLD_TESTS_ENVIRONMENT
464 OLD_TESTS_ENVIRONMENT
=
468 function safe_pushd
()
470 pushd $1 &> /dev
/null
;
472 if [ -n "$BUILD_DIR" ]; then
474 echo "BUILD_DIR=$BUILD_DIR"
479 function safe_popd
()
481 local directory_to_delete
=`pwd`
483 if [ $?
-eq 0 ]; then
484 if [[ "$top_srcdir" == "$directory_to_delete" ]]; then
485 die
"We almost deleted top_srcdir($top_srcdir), programmer error"
488 rm -r -f "$directory_to_delete"
492 function make_valgrind
()
494 if [[ "$VENDOR_DISTRIBUTION" == 'darwin' ]]; then
499 # If the env VALGRIND_COMMAND is set then we assume it is valid
500 local valgrind_was_set
=false
501 if [[ -z "$VALGRIND_COMMAND" ]]; then
502 setup_valgrind_command
503 if [[ -n "$VALGRIND_COMMAND" ]]; then
504 valgrind_was_set
=true
507 valgrind_was_set
=true
510 # If valgrind_was_set is set to no we bail
511 if ! $valgrind_was_set; then
512 echo 'valgrind was not present'
516 # If we are required to run configure, do so now
517 run_configure_if_required
519 push_TESTS_ENVIRONMENT
521 # If we don't have a configure, then most likely we will be missing libtool
522 assert_file
'configure'
523 if [[ -f 'libtool' ]]; then
524 TESTS_ENVIRONMENT
="./libtool --mode=execute $VALGRIND_COMMAND"
526 TESTS_ENVIRONMENT
="$VALGRIND_COMMAND"
529 make_target
'check' ||
return 1
531 pop_TESTS_ENVIRONMENT
534 function make_install_system
()
536 local INSTALL_LOCATION
=$
(mktemp
-d /tmp
/XXXXXXXXXX
)
537 push_PREFIX_ARG
$INSTALL_LOCATION
539 if [ ! -d $INSTALL_LOCATION ] ; then
540 die
"ASSERT temp directory not found '$INSTALL_LOCATION'"
543 run_configure
#install_buid_dir
545 push_TESTS_ENVIRONMENT
547 make_target
'install'
549 make_target
'installcheck'
551 make_target
'uninstall'
553 pop_TESTS_ENVIRONMENT
556 rm -r -f $INSTALL_LOCATION
559 if [ -f 'Makefile' ]; then
560 die
"ASSERT Makefile should not exist"
566 function make_darwin_malloc
()
568 run_configure_if_required
570 old_MallocGuardEdges
=$MallocGuardEdges
572 old_MallocErrorAbort
=$MallocErrorAbort
574 old_MallocScribble
=$MallocScribble
579 MallocGuardEdges
=$old_MallocGuardEdges
580 MallocErrorAbort
=$old_MallocErrorAbort
581 MallocScribble
=$old_MallocScribble
584 function snapshot_check
()
586 if [ ! -f "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
590 if [ -n "$BOOTSTRAP_SNAPSHOT_CHECK" ]; then
591 assert_file
"$BOOTSTRAP_SNAPSHOT_CHECK" 'snapshot check failed'
595 # This will reset our environment, and make sure built files are available.
596 function make_for_snapshot
()
598 # Make sure it is clean
599 make_maintainer_clean
603 make_target
'distclean'
605 # We should have a configure, but no Makefile at the end of this exercise
606 assert_no_file
'Makefile'
607 assert_exec_file
'configure'
612 function check_mingw
()
614 command_exists
'mingw64-configure'
616 if [ "$ret" -ne 0 ]; then
620 command_exists
'mingw64-make'
622 if [ "$ret" -ne 0 ]; then
629 function check_clang
()
631 command_exists
'clang'
633 if [ "$ret" -ne 0 ]; then
640 function check_clang_analyzer
()
642 command_exists
'scan-build'
644 if [ "$ret" -ne 0 ]; then
651 function make_skeleton
()
656 if [ $ret -eq 0 ]; then
657 assert_file
'Makefile'
659 make_target
'all' 'warn'
661 if [ $ret -ne 0 ]; then
664 if [[ -n "$DISPLAY" ]]; then
665 if command_exists
'wine'; then
666 TESTS_ENVIRONMENT
='wine'
670 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
671 make_target
'check' 'warn' || warn
"$MAKE check failed"
676 if $jenkins_build_environment; then
677 make_target
'clean' 'warn'
684 function make_for_mingw
()
686 if ! check_mingw
; then
690 # Make sure it is clean
691 if [ -f Makefile
-o -f configure
]; then
692 make_maintainer_clean
699 CONFIGURE
='mingw64-configure'
701 CONFIGURE_ARGS
='--enable-static --disable-shared'
711 function make_for_clang
()
713 if ! check_clang
; then
717 # Make sure it is clean
718 if [ -f Makefile
-o -f configure
]; then
719 make_maintainer_clean
739 function make_for_clang_analyzer
()
741 if ! check_clang
; then
745 if ! check_clang_analyzer
; then
746 die
'clang-analyzer was not found'
749 # Make sure it is clean
750 if [ -f Makefile
-o -f configure
]; then
751 make_maintainer_clean
760 CONFIGURE_ARGS
='--enable-debug'
765 make_target
'clean' 'warn'
767 scan-build
-o clang-html
make -j4 -k
774 # If we are locally testing, we should make sure the environment is setup correctly
775 function check_for_jenkins
()
777 if ! $jenkins_build_environment; then
778 echo "Not inside of jenkins"
780 if [ -f 'configure' ]; then
781 make_maintainer_clean
784 if $BOOTSTRAP_SNAPSHOT; then
790 function make_universe
()
797 make_for_clang_analyzer
799 if [ check_mingw
-eq 0 ]; then
807 function make_for_continuus_integration
()
809 # Setup the environment if we are local
812 # No matter then evironment, we should not have a Makefile at this point
813 assert_no_file
'Makefile'
815 # Platforms which require bootstrap should have some setup done before we hit this stage.
816 # If we are building locally, skip this step, unless we are just testing locally.
817 if $BOOTSTRAP_SNAPSHOT; then
820 # If we didn't require a snapshot, then we should not have a configure
821 assert_no_file
'configure'
826 assert_no_file
'Makefile' 'Programmer error, Makefile existed where build state should have been clean'
832 assert_exec_file
'configure'
833 assert_file
'Makefile'
837 # make rpm includes "make distcheck"
838 if [[ -f rpm.am
]]; then
840 elif [[ -d rpm
]]; then
846 assert_exec_file
'configure'
847 assert_file
'Makefile'
854 assert_exec_file
'configure'
855 assert_file
'Makefile'
861 assert_exec_file
'configure'
862 assert_file
'Makefile'
866 assert_exec_file
'configure'
867 assert_file
'Makefile'
876 make_maintainer_clean
881 # The point to this test is to test bootstrap.sh itself
882 function self_test
()
884 # We start off with a clean env
885 make_maintainer_clean
887 eval "./bootstrap.sh jenkins" || die
"failed 'jenkins'"
888 eval "./bootstrap.sh all" || die
"failed 'all'"
889 eval "./bootstrap.sh gdb" || die
"failed 'gdb'"
890 eval "./bootstrap.sh maintainer-clean" || die
"failed 'maintainer-clean'"
893 function make_install_html
()
895 run_configure_if_required
896 assert_file
'configure'
898 make_target
'install-html'
903 if command_exists
'gdb'; then
904 run_configure_if_required
906 push_TESTS_ENVIRONMENT
908 # Set ENV GDB_COMMAND
909 if [[ -z "$GDB_COMMAND" ]]; then
913 # If we don't have a configure, then most likely we will be missing libtool
914 assert_file
'configure'
915 if [[ -f 'libtool' ]]; then
916 TESTS_ENVIRONMENT
="./libtool --mode=execute $GDB_COMMAND"
918 TESTS_ENVIRONMENT
="$GDB_COMMAND"
923 if [ -f 'gdb.txt' ]; then
927 pop_TESTS_ENVIRONMENT
929 if [ -f '.gdb_history' ]; then
933 if $jenkins_build_environment; then
937 echo 'gdb was not present'
942 # $1 target to compile
943 # $2 to die, or not to die, based on contents
944 function make_target
()
947 die
"Programmer error, no target provided for make"
950 if [ ! -f 'Makefile' ]; then
951 die
"Programmer error, make was called before configure"
955 if [ -n "$TESTS_ENVIRONMENT" ]; then
957 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
961 if [ -z "$MAKE" ]; then
962 die
"MAKE was not set"
965 # $2 represents error or warn
969 if [ $ret -ne 0 ]; then
971 warn
"Failed to execute $MAKE $1: $ret"
973 die
"Failed to execute $MAKE $1: $ret"
980 function make_distcheck
()
982 make_target
'distcheck'
987 if command_exists
'rpmbuild'; then
988 if [ -f 'rpm.am' -o -d 'rpm' ]; then
989 run_configure_if_required
992 if $jenkins_build_environment; then
1000 function make_maintainer_clean
()
1002 run_configure_if_required
1003 make_target
'maintainer-clean' 'no_error'
1005 # Lets make sure we really cleaned up the environment
1006 assert_no_file
'Makefile'
1007 assert_no_file
'configure'
1008 assert_no_directory
'autom4te.cache'
1011 function make_check
()
1016 function make_jenkins_default
()
1022 function make_default
()
1024 run_configure_if_required
1028 function run_configure_if_required
()
1030 run_autoreconf_if_required
1032 if [ ! -f 'Makefile' ]; then
1036 assert_file
'Makefile' 'configure did not produce a Makefile'
1039 function run_autoreconf_if_required
()
1041 if [ ! -x 'configure' ]; then
1045 assert_exec_file
'configure'
1048 function run_autoreconf
()
1050 if [[ -z "$AUTORECONF" ]]; then
1051 die
"Programmer error, tried to call run_autoreconf () but AUTORECONF was not set"
1054 if test $use_libtool = 1; then
1055 assert
$BOOTSTRAP_LIBTOOLIZE
1056 run
$BOOTSTRAP_LIBTOOLIZE '--copy' '--install' '--force' || die
"Cannot execute $BOOTSTRAP_LIBTOOLIZE"
1059 run
$AUTORECONF || die
"Cannot execute $AUTORECONF"
1061 eval 'bash -n configure' || die
"autoreconf generated a malformed configure"
1070 if [ -z "$1" ]; then
1077 function parse_command_line_options
()
1079 local SHORTOPTS
=':apcmt:dvh'
1083 while getopts "$SHORTOPTS" opt
; do
1086 AUTORECONF_OPTION
=true
1087 MAKE_TARGET
='autoreconf'
1090 PRINT_SETUP_OPTION
=true
1093 CONFIGURE_OPTION
=true
1094 MAKE_TARGET
='configure'
1096 m
) # maintainer-clean
1098 MAKE_TARGET
='clean_op'
1102 TARGET_OPTION_ARG
="$OPTARG"
1103 MAKE_TARGET
="$OPTARG"
1110 echo "bootstrap.sh [options] optional_target ..."
1118 echo "Option -$OPTARG requires an argument." >&2
1122 echo "$0: error - unrecognized option $1" 1>&2
1130 if [ -n "$1" ]; then
1135 function determine_vcs
()
1137 if [[ -d '.git' ]]; then
1139 elif [[ -d '.bzr' ]]; then
1141 elif [[ -d '.svn' ]]; then
1143 elif [[ -d '.hg' ]]; then
1147 if [[ -n "$VCS_CHECKOUT" ]]; then
1152 function require_libtoolise
()
1155 grep '^[ ]*A[CM]_PROG_LIBTOOL' configure.ac
>/dev
/null \
1157 grep '^[ ]*LT_INIT' configure.ac
>/dev
/null \
1161 function autoreconf_setup
()
1163 # Set ENV MAKE in order to override "make"
1164 if [[ -z "$MAKE" ]]; then
1165 if command_exists
'gmake'; then
1166 MAKE
=`type -p gmake`
1168 if command_exists
'make'; then
1173 if [ "$VCS_CHECKOUT" ]; then
1175 MAKE
="$MAKE --warn-undefined-variables"
1184 if [[ -z "$GNU_BUILD_FLAGS" ]]; then
1185 GNU_BUILD_FLAGS
="--install --force"
1189 GNU_BUILD_FLAGS
="$GNU_BUILD_FLAGS --verbose"
1192 if [ -z "$ACLOCAL_PATH" ]; then
1193 ACLOCAL_PATH
="/usr/local/share/aclocal $ACLOCAL_PATH"
1196 if [[ -z "$WARNINGS" ]]; then
1197 if [[ -n "$VCS_CHECKOUT" ]]; then
1198 WARNINGS
="all,error"
1204 if test $use_libtool = 1; then
1205 if [[ -n "$LIBTOOLIZE" ]]; then
1206 BOOTSTRAP_LIBTOOLIZE
=`type -p $LIBTOOLIZE`
1208 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1209 echo "Couldn't find user supplied libtoolize, it is required"
1212 # If we are using OSX, we first check to see glibtoolize is available
1213 if [[ "$VENDOR_DISTRIBUTION" == "darwin" ]]; then
1214 BOOTSTRAP_LIBTOOLIZE
=`type -p glibtoolize`
1216 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1217 echo "Couldn't find glibtoolize, it is required on OSX"
1220 BOOTSTRAP_LIBTOOLIZE
=`type -p libtoolize`
1222 if [[ -z "$BOOTSTRAP_LIBTOOLIZE" ]]; then
1223 echo "Couldn't find libtoolize, it is required"
1228 LIBTOOLIZE_OPTIONS
="--verbose $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1231 LIBTOOLIZE_OPTIONS
="--debug $BOOTSTRAP_LIBTOOLIZE_OPTIONS"
1236 # Test the ENV AUTOMAKE if it exists
1237 if [[ -n "$AUTOMAKE" ]]; then
1238 run
$AUTOMAKE '--help' &> /dev
/null || die
"Failed to run AUTOMAKE:$AUTOMAKE"
1241 # Test the ENV AUTOCONF if it exists
1242 if [[ -n "$AUTOCONF" ]]; then
1243 run
$AUTOCONF '--help' &> /dev
/null || die
"Failed to run AUTOCONF:$AUTOCONF"
1246 # Test the ENV AUTOHEADER if it exists
1247 if [[ -n "$AUTOHEADER" ]]; then
1248 run
$AUTOHEADER '--help' &> /dev
/null || die
"Failed to run AUTOHEADER:$AUTOHEADER"
1251 # Test the ENV AUTOM4TE if it exists
1252 if [[ -n "$AUTOM4TE" ]]; then
1253 run
$AUTOM4TE '--help' &> /dev
/null || die
"Failed to run AUTOM4TE:$AUTOM4TE"
1256 # Test the ENV AUTOHEADER if it exists, if not we add one and add --install
1257 if [[ -z "$ACLOCAL" ]]; then
1258 ACLOCAL
="aclocal --install"
1260 run
$ACLOCAL '--help' &> /dev
/null || die
"Failed to run ACLOCAL:$ACLOCAL"
1262 if [[ -z "$AUTORECONF" ]]; then
1263 AUTORECONF
=`type -p autoreconf`
1265 if [[ -z "$AUTORECONF" ]]; then
1266 die
"Couldn't find autoreconf"
1269 if [[ -n "$GNU_BUILD_FLAGS" ]]; then
1270 AUTORECONF
="$AUTORECONF $GNU_BUILD_FLAGS"
1274 run
$AUTORECONF '--help' &> /dev
/null || die
"Failed to run AUTORECONF:$AUTORECONF"
1277 function print_setup
()
1279 saved_debug_status
=$DEBUG
1284 echo '----------------------------------------------'
1285 echo 'BOOTSTRAP ENV'
1286 echo "AUTORECONF=$AUTORECONF"
1287 echo "HOST_OS=$HOST_OS"
1290 if $AUTORECONF_OPTION; then
1294 if $CLEAN_OPTION; then
1298 if $CONFIGURE_OPTION; then
1302 if $DEBUG_OPTION; then
1306 if $PRINT_SETUP_OPTION; then
1310 if $TARGET_OPTION; then
1311 echo "--target=$TARGET_OPTION_ARG"
1314 if $VERBOSE_OPTION; then
1318 if [[ -n "$MAKE" ]]; then
1322 if [[ -n "$MAKE_TARGET" ]]; then
1323 echo "MAKE_TARGET=$MAKE_TARGET"
1326 if [[ -n "$PREFIX" ]]; then
1327 echo "PREFIX=$PREFIX"
1330 if [[ -n "$TESTS_ENVIRONMENT" ]]; then
1331 echo "TESTS_ENVIRONMENT=$TESTS_ENVIRONMENT"
1334 if [[ -n "$VCS_CHECKOUT" ]]; then
1335 echo "VCS_CHECKOUT=$VCS_CHECKOUT"
1346 if [[ -n "$WARNINGS" ]]; then
1347 echo "WARNINGS=$WARNINGS"
1349 echo '----------------------------------------------'
1351 if $saved_debug_status; then
1356 function make_clean_option
()
1358 run_configure_if_required
1360 make_maintainer_clean
1362 if [[ "$VCS_CHECKOUT" == 'git' ]]; then
1363 run
"$VCS_CHECKOUT" status
--ignored
1364 elif [[ -n "$VCS_CHECKOUT" ]]; then
1365 run
"$VCS_CHECKOUT" status
1369 function make_for_autoreconf
()
1371 if [ -f 'Makefile' ]; then
1372 make_maintainer_clean
1377 assert_no_file
'Makefile'
1380 function check_make_target
()
1434 die
"Unknown MAKE_TARGET option: $1"
1439 function bootstrap
()
1441 determine_target_platform
1445 # Set up whatever we need to do to use autoreconf later
1449 if [ -z "$MAKE_TARGET" ]; then
1450 MAKE_TARGET
="make_default"
1453 if $PRINT_SETUP_OPTION -o $DEBUG; then
1458 # Exit if all we were looking for were the currently used options
1459 if $PRINT_SETUP_OPTION; then
1464 # Use OLD_TESTS_ENVIRONMENT for tracking the state of the variable
1465 local OLD_TESTS_ENVIRONMENT
=
1467 # Set ENV PREFIX in order to set --prefix for ./configure
1468 if [[ -n "$PREFIX" ]]; then
1469 push_PREFIX_ARG
$PREFIX
1472 # We should always have a target by this point
1475 local MAKE_TARGET_ARRAY
=($MAKE_TARGET)
1477 for target
in "${MAKE_TARGET_ARRAY[@]}"
1479 # If we are running inside of Jenkins, we want to only run some of the possible tests
1480 if $jenkins_build_environment; then
1481 check_make_target
$target
1510 if ! check_clang
; then
1511 die
"clang was not found"
1514 if ! make_for_clang
; then
1515 die
"Failed to build clang: $?"
1519 if ! check_clang_analyzer
; then
1520 die
"clang-analyzer was not found"
1522 if ! check_clang
; then
1523 die
"clang was not found"
1526 if ! make_for_clang_analyzer
; then
1527 die
"Failed to build clang-analyzer: $?"
1531 if ! check_mingw
; then
1532 die
"mingw was not found"
1535 if ! make_for_mingw
; then
1536 die
"Failed to build mingw: $?"
1552 make_for_continuus_integration
1555 run_configure_if_required
1556 make_target
"$target"
1564 # Variables we export
1565 declare -x VCS_CHECKOUT
=
1567 # Variables we control globally
1571 # Options for getopt
1572 local AUTORECONF_OPTION
=false
1573 local CLEAN_OPTION
=false
1574 local CONFIGURE_OPTION
=false
1575 local DEBUG_OPTION
=false
1576 local PRINT_SETUP_OPTION
=false
1577 local TARGET_OPTION
=false
1578 local TARGET_OPTION_ARG
=
1579 local VERBOSE_OPTION
=false
1581 local OLD_CONFIGURE
=
1582 local OLD_CONFIGURE_ARG
=
1584 local OLD_TESTS_ENVIRONMENT
=
1586 # If we call autoreconf on the platform or not
1587 local AUTORECONF_REBUILD_HOST
=false
1588 local AUTORECONF_REBUILD
=false
1590 local -r top_srcdir
=`pwd`
1593 if [ -z "$CONFIGURE" ]; then
1594 CONFIGURE
="$top_srcdir/configure"
1598 # Variables for determine_target_platform () and rebuild_host_os ()
1599 # UNAME_MACHINE_ARCH= uname -m
1600 # VENDOR= apple, redhat, centos, canonical
1602 # RHEL{rhel,Tikanga,Santiago}
1603 # Ubuntu{ubuntu,Lucid,Maverick,Natty,Oneiric,Precise,Quantal}
1604 # Fedora{fedora,Verne,Beefy}
1605 # OSX{osx,lion,snow,mountain}
1606 # VENDOR_DISTRIBUTION= darwin,fedora,rhel,ubuntu
1607 # UNAME_KERNEL= Linux, Darwin,...
1608 # UNAME_KERNEL_RELEASE= Linux, Darwin,...
1609 local UNAME_MACHINE_ARCH
=unknown
1610 local VENDOR
=unknown
1611 local VENDOR_RELEASE
=unknown
1612 local VENDOR_DISTRIBUTION
=unknown
1613 local UNAME_KERNEL
=unknown
1614 local UNAME_KERNEL_RELEASE
=unknown
1617 rebuild_host_os no_output
1619 parse_command_line_options $@
1621 # If we are running under Jenkins we predetermine what tests we will run against
1622 # This MAKE_TARGET can be overridden by parse_command_line_options based MAKE_TARGET changes.
1623 # We don't want Jenkins overriding other variables, so we NULL them.
1624 if [ -z "$MAKE_TARGET" ]; then
1625 if $jenkins_build_environment; then
1626 MAKE_TARGET
='jenkins'
1638 function set_branch
()
1640 if [ -z "$BRANCH" ]; then
1641 if [ -z "$CI_PROJECT_TEAM" ]; then
1642 die
"Variable CI_PROJECT_TEAM has not been set"
1644 if [ -z "$PROJECT" ]; then
1645 die
"Variable PROJECT has not been set"
1647 if [ -z "$BUILD_TAG" ]; then
1648 die
"Variable BUILD_TAG has not been set"
1651 BRANCH
="lp:~$CI_PROJECT_TEAM/$PROJECT/$BUILD_TAG"
1655 if [ -z "$BRANCH" ]; then
1656 die
"Missing values required to build BRANCH variable."
1662 if [ -z "$VCS_CHECKOUT" ]; then
1663 die
"Merges require VCS_CHECKOUT."
1668 if [[ "$VCS_CHECKOUT" == 'bzr' ]]; then
1669 if test -n "$BRANCH_TO_MERGE"; then
1670 bzr merge
$BRANCH_TO_MERGE
1671 bzr commit
--message="Merge $BRANCH_TO_MERGE Build: $BUILD_TAG" --unchanged
1675 elif [[ -n "$VCS_CHECKOUT" ]]; then
1676 die
"Merge attempt occured, current VCS setup does not support this"
1680 function enable_debug
()
1683 local caller_loc
=`caller`
1685 echo "$caller_loc Enabling debug: $1"
1687 echo "$caller_loc Enabling debug"
1697 Usage: $program_name [OPTION]..
1699 Bootstrap this package from the checked-out sources, and optionally walk through CI run.
1706 function disable_debug
()
1712 # Script begins here
1716 env_debug_enabled
=false
1717 if [[ -n "$JENKINS_HOME" ]]; then
1718 declare -r jenkins_build_environment
=true
1720 declare -r jenkins_build_environment
=false
1730 export GNU_BUILD_FLAGS
1732 export LIBTOOLIZE_OPTIONS
1734 export TESTS_ENVIRONMENT
1740 export MallocGuardEdges
1741 export MallocErrorAbort
1742 export MallocScribble
1746 # We check for DEBUG twice, once before we source the config file, and once afterward
1747 env_debug_enabled
=false
1748 if [[ -n "$DEBUG" ]]; then
1749 env_debug_enabled
=true
1754 # Variables which only can be set by .bootstrap
1755 BOOTSTRAP_SNAPSHOT
=false
1756 BOOTSTRAP_SNAPSHOT_CHECK
=
1758 if [ -f '.bootstrap' ]; then
1762 if $env_debug_enabled; then
1765 if [[ -n "$DEBUG" ]]; then
1766 enable_debug
"Enabling DEBUG from '.bootstrap'"
1771 # We do this in order to protect the case where DEBUG
1772 if ! $env_debug_enabled; then